Owner's Manual
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
140 The Control Panel
LANGUAGE
You can select the language to be displayed on the printer’s LCD.
1. In Maintenance mode, press or to highlight LANGUAGE, then press
Menu.
2. Press or to select a language.
3. Press Menu to set the language. Confirm that READY (or a similar
message in the language selected) appears on the printer’s LCD.
Note:
It may take a while for READY (or a similar message in another language) to appear on
the printer’s LCD.
PAPER COUNTER
You can activate the paper remaining counter function. When this function is
on, ROLL COUNTER or SHEET COUNTER appears on the PRINTER SETUP menu.
1. In Maintenance mode, press or to display PAPER COUNTER, then press
Menu.
2. Press or to select the paper counter function you would like.
3. Press Menu to set the value.
UNIT
You can select a unit of measurement to use to display length. Follow the
steps below to select a unit.
1. In Maintenance mode, press or to select UNIT, then press Menu.
2. Press or to select a unit of measure.
3. Press Menu to set the value.
CUT PRESSURE
You can select cutting pressure.