Product Information Guide

EPSON Stylus Pro 7600 and 9600
5 - EPSON Stylus Pro 7600 and 9600 7/02
Consumables and Accessories
Ink Cartridges
When you install the printer’s first ink cartridges, it takes
about 10 minutes to initialize the printer. Do not interrrupt
this process by turning off the printer, opening the printer
covers, or releasing the paper set lever, or the printer will have
to re-initialize. In that case, there may not be enough ink left
in the original cartridges and you may have to replace them
with new ones.
When you installed the ink cartridges that came with the
printer, it was initialized as either a Photographic Dye ink
model or UltraChrome ink model. If you don’t use the correct
replacement cartridges for your model, you will see an error
message and your printer won’t work until you insert the
correct cartridges.
If you have a Stylus Pro 9600 that uses UltraChrome ink, you
can install any combination of 110 and 220 ml cartridges.
Unless you’re planning to switch between black ink modes
(see page 12), be sure to replace the black ink cartridges with
the same type as you’re currently using.
Use the following cartridges before the expiration date on the
package:
Photographic Dye ink users:
* Your printer requires two black ink cartridges.
UltraChrome ink users:
* Stylus Pro 9600 only.
** Your printer uses two black ink cartridges. Unless you are switching
between black ink modes, use the same type of cartridges as are
currently installed. Check their type by looking at the installed
cartridges. If you install an incorrect cartridge, you will see the
message
WRONG INK CARTRIDGE
.
User-Replaceable Parts
You can order these user-replaceable parts:
Options
The following options are available:
* Designed for use with heavy media, which may damage the printer’s
built-in cutter.
Black* T545100 Light cyan T545600
Cyan T545200 Light magenta T545500
Magenta T545300 Yellow T545400
Cartridge 110 ml 220 ml*
Photo Black** T543100 T544100
Matte Black** T543800 T544800
Light Black** T543700 T544700
Cyan T543200 T544200
Magenta T543300 T544300
Light Magenta T543600 T544600
Light Cyan T543500 T544500
Yellow T543400 T544400
Part Part number
Relacement Ink Maintenance Tank C120890071
Replacement Printer Cutter Blade (replaces the
printer’s built-in cutter)
C12C815241
Part Part number
EPSON Stylus Pro 7600 Printer Stand C12C844061
EFI
®
Fiery
®
Spark Professional 2.0 Software RIP C842832
Internal 10/100 BaseT (Ethernet
™
) Type-B interface
card
C12C823912
Internal IEEE 1394 (FireWire
™
) Type-B interface card C823722
Automatic Take-Up Reel System (Stylus Pro 9600 only) C12C815251
Replacement 44-inch Take-up Reel Core
(Stylus Pro 9600 only)
C815121
Paper Roller Spindle (Normal Tension) — 2- or 3-inch
Stylus Pro 7600:
Stylus Pro 9600:
C12C811161
C12C811151
Paper Roller Spindle (High Tension) — 2- or 3-inch
Stylus Pro 7600:
Stylus Pro 9600:
C12C811155
C12C811152
Manual Media Cutting System*
Stylus Pro 7600:
Stylus Pro 9600:
C12C815231
C815182
Replacement Manual Cutting Blade (for Manual Media
Cutting System)
C815192