ColorBurst RIP for Epson Stylus Pro Edition 3880 4880 7880 9880 ® Printed in USA CPD-25014R1 GETTING STARTED
Getting Started The enclosed disc includes the ColorBurst® RIP server software and client PPD (PostScript® Printer Description) software, as well as the SpectralVision™ utility for printer linearization. Before setting up the ColorBurst RIP, see your Epson Stylus® Pro manual to set up the Epson Stylus Pro printer on the computer that will run the RIP server. To set up the RIP server, double-click the installer icon and follow the on-screen instructions.
Note: The file names and paths may be slightly different, depending on your printer model. If you are using the Epson Stylus Pro 7880 or 9880 printer, you need to attach the included USB key to the computer that is running the RIP server.
Mac OS X Clients Printing to a Mac OS X RIP Server These instructions are for Mac OS X 10.4.x through 10.6.x. 1. Make sure your computer is connected to the same network as the ColorBurst RIP server computer. 2. Insert the ColorBurst RIP disc into your drive. 3. Double-click the disc icon, then double-click the ColorBurst PPD Client Installer icon. 4. When installation is complete, check the ColorBurst RIP server computer to make sure ColorBurst RIP is running. 5.
Mac OS X Clients Printing to a Windows RIP Server These instructions are for Mac OS X 10.4.x through 10.6.x. 1. Make sure your computer is connected to the same network as the ColorBurst RIP server computer. 2. Insert the ColorBurst RIP disc into your drive. 3. Double-click the disc icon, then double-click the ColorBurst PPD Client Installer icon. 4. When installation is complete, check the ColorBurst RIP server computer to make sure ColorBurst is running. 5.
9. Select the Windows computer name where the ColorBurst RIP is running. In 10.4.x, click Choose. 10. Select ColorBurst RIP. Then select the ColorBurst RIP driver under the Printer Model or Printer Using list. If you don’t see the ColorBurst RIP driver under the Printer Model or Print Using list, select Other. Then navigate to the Hard Drive\Library\ Printers\PPDs\Contents\Resources folder, select CSEXXXX.PPD.GZ, and click Open (10.6 or 10.5.x) or Choose (10.4.x).
Windows Clients Printing to a Windows RIP Server ColorBurst supports 32-bit versions of Windows 7, Windows Vista®, and Windows XP. Other versions of Windows, including 64-bit versions, are not supported. Note: Make sure the ColorBurst RIP is shared on the server. 1. Make sure the network is set up and the ColorBurst RIP is running. 2. Windows 7 or Windows Vista: Click > Control Panel > Devices and Printers (or Hardware and Sound) > Printers. Windows XP: Click Start > Control Panel > Printers and Faxes. 3.
6. If you want to use the ColorBurst RIP as your default printer, choose Set as the default printer or Yes. If not, uncheck the Set as the default printer checkbox or choose No. Click Next. 7. Click Finish when you see a screen telling you that setup is complete. You’re ready to print to the ColorBurst RIP. Windows Clients Printing to a Mac OS X RIP Server ColorBurst supports 32-bit versions of Windows 7, Windows Vista, and Windows XP.
6. Select the Local printer option. In Windows XP, make sure Automatically detect and install my Plug and Play printer is unchecked. Then click Next. 7. Click Create a new port, select Standard TCP/IP Port, and click Next. 8. Windows 7 or Windows Vista: Uncheck Query the printer and automatically select the driver to use. Windows XP: When you see the Add Standard TCP/IP Print Port Wizard screen, click Next. 9.
12. Click Next. 13. Windows 7 or Windows Vista: Click Next. Windows XP: Click Finish to close the Add Standard TCP/IP Printer Port Wizard. 14. At the next screen, click Have Disk, then click Browse. 15. Browse to the folder that you unzipped and select ColorBurst.inf. 16. Click Open to return to the Install from Disk window. 17. Click OK. 18. Select ColorBurst, then click Next. 19. Leave the default name or enter a new name in the Printer name box. Then click Next. 20.
Epson and Epson Stylus are registered trademarks of Seiko Epson Corporation. ColorBurst is a registered trademark and SpectralVision is a trademark of CSE Systems, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. The contents of this manual are subject to change without notice. © 2009 Epson America, Inc.
11
ColorBurst RIP for Epson Stylus Pro Edition 3880 4880 7880 9880 ® Printed in USA CPD-25014R1 GETTING STARTED
