User's Manual

2-78

78 | Handling Paper and Other Media

4. Feed the sheet into the paper slot. Make sure the right edge of the paper

is straight and aligned with the scale on the roll paper cover.

For a larger sheet of paper, feed it so that it comes out below. Then align

the edges of the sheet with the rows of holes as shown.

5. Pull the paper lever forward, to the secured position.

6. Press the

Pause button (or simply wait for 5 seconds). The sheet feeds

into printing position automatically and

READY appears on the control

panel.

7. Print your page. After it is finished, the sheet stays in the printer.

8. To remove your print, press the

Paper Feed d button.

Note

For heavy paper, you may

need to increase the

suction strength by

pressing the

u button.

This helps hold the paper

in place during loading

and printing.

For lightweight paper,

decrease the suction by

pressing the

d button.

Caution

To avoid damaging the

printer, never move the

paper lever during

printing, or while the

Operate or Pause light

is flashing .