Alignment Guide

Using the Paper Tape | 21
English
4. Feed the media by pressing the button, until the leading edge of the paper tape reaches the roll core
on the auto take-up reel.
5. Attach the paper tape to the roll core using adhesive tape. If you want to take up media with the
printed side facing in, attach the paper tape to the back of the roll core.
6. Set the Auto switch on the auto take-up reel according to the way you want to wind the paper:
• Printed side out:
• Printed side in:
7. Gently lower the tension bar. Make sure the paper tape does not come off.
EPSON and SureColor are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.