Manualshelf

Quick Reference Guide

ManualsBrandsEpson ManualsPrintersEpson Epson SureColor S30670 Production Edition
11121314151617181920
18 | Cutting Off and Removing Prints
Cutting Off and Removing Prints
1. Make sure Ready appears on the LCD display.
Note: If you are using the auto take-up reel, set the Auto switch to OFF before using the manual switch to
position the media over the cutting groove.
2. Press the Media feed button and the OK button. The printer feeds the media to the cutting
position.
Note: If you have printed the amount of media remaining, press the u button to rewind the media so this
information is not cut off.
3.
Remove the media holding plates.