Quick Reference Guide

Performing Auto Feed Adjustment | 21
English
Performing Auto Feed Adjustment
Feed Adjustment corrects banding problems, and can be performed manually (as described in the
on-screen User’s Guide) or automatically (as described below).
1. Press the Menu button.
2. Select Media Setup and press OK.
3. Select Customize Settings and press OK.
4. Select the media bank setting number and name for the loaded media and press OK.
5. Select Feed Adjustment and press OK.
6. Select Auto and press OK.
7. Press OK again to print a test pattern and perform auto feed adjustment.
Performing Auto Head Alignment
Head Alignment corrects grainy or misaligned prints, and can be performed manually (as described in the
on-screen User’s Guide) or automatically (as described below).
1. Press the Menu button.
2. Select Media Setup and press OK.
3. Select Customize Settings and press OK.
4. Select the media bank setting number and name for the loaded media and press OK.
5. Select Head Alignment and press OK.
6. Select Auto(Uni-D) first, then Auto(BI-D).
7. Press OK again to print a test pattern and perform auto head alignment.
Note: If the automatic adjustments do not work, use manual adjustments. Some media types will not work with
automatic adjustments.