WF-5620 User's Guide
Contents WF-5620 User's Guide............................................................................................................................... 13 Product Basics .......................................................................................................................................... Using the Control Panel ..................................................................................................................... Control Panel Buttons and Lights .......................
Selecting Wireless Network Settings From the Control Panel ....................................................... Wi-Fi Direct Mode Setup .................................................................................................................... Enabling Wi-Fi Direct Mode ........................................................................................................... Wi-Fi Protected Setup (WPS)..............................................................................................
Printing from a Computer ......................................................................................................................... 79 Printing with Windows ........................................................................................................................ 79 Selecting Basic Print Settings - Windows ...................................................................................... 79 Paper Source Options - Windows ......................................................
Printing Your Document or Photo - OS X..................................................................................... 112 Checking Print Status - OS X .................................................................................................. 113 Cancelling Printing Using a Product Button...................................................................................... 114 Scanning ..............................................................................................................
Faxing....................................................................................................................................................... Connecting a Telephone or Answering Machine .............................................................................. Setting Up Fax Features .................................................................................................................. Setting Up Basic Fax Features ..............................................................
Dialing Fax Numbers from a Connected Telephone ............................................................... Sending Faxes Using the Fax Utility - Windows .......................................................................... Sending Faxes Using the Fax Utility - OS X................................................................................. Receiving Faxes...............................................................................................................................
Printing With Expended Color Cartridges - Windows................................................................... Printing With Expended Color Cartridges - OS X......................................................................... Conserving Low Black Ink with Windows ......................................................................................... Replacing the Maintenance Box.......................................................................................................
Cannot Scan Over a Network ...................................................................................................... Solving Copying Problems ............................................................................................................... Product Makes Noise, But Nothing Copies.................................................................................. Product Makes Noise When It Sits for a While.............................................................................
Image Consists of a Few Dots Only............................................................................................. 298 Line of Dots Appears in All Scanned Images............................................................................... 298 Straight Lines in an Image Appear Crooked ................................................................................ 299 Image is Distorted or Blurry ...................................................................................................
Safety and Approvals Specifications ................................................................................................ 317 Notices ..................................................................................................................................................... 318 General Product Safety Instructions................................................................................................. 318 Ink Cartridge Safety Instructions...........................................
WF-5620 User's Guide Welcome to the WF-5620 User's Guide. For a printable PDF copy of this guide, click here.
Product Basics See these sections to learn about the basic features of your product. Using the Control Panel Product Parts Locations Using Eco Mode and Other Power Saving Settings Epson Connect Solutions for Smartphones, Tablets, and More Using AirPrint Using Google Cloud Print Using the Control Panel See these sections to learn about the control panel and select control panel settings.
1 The 2 The 3 The 4 The Reset button 5 The Stop button 6 The LCD screen 7 The 8 The Status button and lights 9 The numeric keypad 10 The C clear button 11 The B&W button 12 The Color button power button and light home button Interrupt button back button Status Icon Information Status Button Information Parent topic: Using the Control Panel Status Icon Information Your product may display status icons on the LCD screen for certain product status conditions.
Icons Description One or more of the ink cartridges are expended or the maintenance box is full. Press the Status button to open the Status Menu, select Printer Information, and check the status of the consumables. Unread or unprinted fax data is stored in the product. If you have set up the product to save received faxes on a computer or external storage device, this icon may also indicate that received faxes have not been saved on the computer or storage device. Fax memory usage. Fax memory is full.
Icons Description Access to the product's functions are restricted to authorized users. Press the icon to log in to the printer. (You need to enter a user name and password.) Contact your administrator if you do not know the login information. Access to the product's functions are restricted to authorized users and a user is currently logged in. Press the icon to log out.
1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Scroll down and select Admin Settings. 4. Select Admin Password. 5. Select Register.
6. Use the displayed keyboard to enter a password, and press . 7. Enter your password again to confirm. 8. Select OK. 9. Select Lock Setting and select On. When the control panel is locked, you must enter the password to access any of the locked settings. Note: If you forget your password, contact Epson for assistance.
• To enter a space, select . Parent topic: Setting a Password and Locking the Control Panel Related topics Wi-Fi or Wired Networking Using Presets You can save frequently used copy, fax, and scan settings as presets. This lets you easily reuse them whenever necessary. Note: Presets can be locked by an administrator. If you cannot access or change presets, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Presets. Enter the Administrator password, if necessary.
You see the main screen for that function, such as the Copy screen: 5. Select the settings you want to save, and select Save. You see a screen like this: 6. Use the displayed keyboard to enter a name for the preset, and press . 7. Select Save. When you copy, fax, or scan, you can use the preset by selecting Presets and selecting your preset from the list.
Parent topic: Setting a Password and Locking the Control Panel Related tasks Entering Characters on the LCD Screen Changing LCD Screen Language You can change the language used on the LCD screen. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5.
Adjusting Control Panel Sounds You can adjust the sound level heard when you press buttons on the control panel. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Select Sound. 6. Select Button Press. 7. Press to decrease or to increase the sound. 8.
1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Select LCD Brightness. 6. Adjust the screen brightness by selecting a brightness level or by pressing the left and right arrow buttons. 7. Select OK to exit.
You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Scroll down and select Operation Time Out. 6. Select Off. Parent topic: Using the Control Panel Product Parts Locations See these sections to identify the parts on your product.
Product Parts - Top 1 ADF cover 2 Automatic Document Feeder (ADF) 3 Edge guide 4 ADF input tray 5 ADF output tray 6 Paper cassette 1 7 Optional paper cassette unit 8 Optional paper cassette cover 9 Optional paper cassette 2 26
1 Edge guides 2 Paper stopper 3 Output tray extension 4 Output tray 5 Edge guides 6 Rear paper feed slot 7 Feeder guard 27
1 Document cover 2 Scanner glass 3 Control panel 4 USB Type A port for external devices Parent topic: Product Parts Locations Product Parts - Inside 28
1 Ink cartridge slots 2 Front cover 3 Print head Parent topic: Product Parts Locations Product Parts - Back 1 Line port 2 EXT port 3 USB port 4 LAN port 5 Service USB port (do not remove sticker) 6 Maintenance box 7 Rear cover 8 AC inlet Parent topic: Product Parts Locations 29
Using Eco Mode and Other Power Saving Settings Your product enters sleep mode automatically and turns off the LCD screen if it is not used for a period of time. You can make the time period shorter and select other options to save energy and resources. Changing the Eco Settings Changing the Sleep Timer Settings Changing the Power Off Timer Settings Parent topic: Product Basics Changing the Eco Settings You can use the product's control panel to change the Eco settings.
4. Select Configure. 5. Change any settings as necessary. 6. Select OK to exit. Parent topic: Using Eco Mode and Other Power Saving Settings Changing the Sleep Timer Settings You can adjust the time period before your product enters sleep mode and turns off the LCD screen. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. The Sleep Timer setting in Eco Mode overrides this Sleep Timer setting. 1.
• Press the number of minutes on the LCD screen, select the number of minutes from the on-screen keypad, then press . 7. Select OK. Parent topic: Using Eco Mode and Other Power Saving Settings Changing the Power Off Timer Settings You can have the product turn off automatically if it is not used for a specified period of time. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary.
Epson Connect Solutions for Smartphones, Tablets, and More You can print documents, photos, emails, and web pages from your home, office, or even across the globe. You can use your smartphone, tablet, or computer. Epson offers these solutions to print and scan from anywhere: Epson Email Print, Epson iPrint Mobile App, Epson Remote Print, and Epson Scan to Cloud.
2. Visit epson.com/connect to learn more about Epson iPrint and check the compatibility of your mobile device. 3. Download Epson iPrint from the Apple App Store or Google Play. 4. Connect your mobile device to the same wireless network that your product is using. 5. Print from your mobile device to your Epson product.
5. Click Add, then follow the instructions on the screen to create your destination list. 6. When you're ready to scan, select the setting for the Scan to Cloud service on your product control panel. Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More Related topics Wi-Fi or Wired Networking Using AirPrint AirPrint allows you to wirelessly print to your AirPrint-enabled product from iPhone, iPad, and iPod touch running the latest version of iOS. 1.
3. Locate your product's IP address on the network status sheet. 4. Enter the IP address into the address bar of a web browser. 5. Select the Google Cloud Print Services option. Note: If you don't see the Google Cloud Print Services option, turn your product off and back on. If the option still doesn't appear, select the Firmware Update option and follow the on-screen instructions to update your product. 6. Click Register. 7. Select the checkbox to agree to the Usage Advisory and click Next. 8.
Wi-Fi or Wired Networking See these sections to use your product on a Wi-Fi or wired network. Wi-Fi Infrastructure Mode Setup Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet Changing or Updating Network Connections Wi-Fi Infrastructure Mode Setup You can set up your product to communicate with your computer using a wireless router or access point. The wireless router or access point can be connected to your computer over a wireless or wired network.
3 Computer with a wireless interface 4 Computer 5 Internet 6 Ethernet cable (used only for wired connection to the wireless router or access point) Selecting Wireless Network Settings From the Control Panel Parent topic: Wi-Fi or Wired Networking Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel.
4. Select Wi-Fi Setup Wizard. Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this guide. 5. Select the name of your wireless network or enter the name manually. Note: To enter the wireless network name manually, select Other Networks and select the Network (SSID) field. Use the displayed keypad to enter your network name. 6.
7. Press when you finish entering your password and select Proceed. 8. Confirm the displayed network settings and select OK to save them. Note: If you need to change a setting, press the back button. 9. If you want to print a network setup report, press one of the 10. Press the buttons. (Otherwise, select Done.) home button to return to the Home screen. If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.
Wi-Fi Direct Mode Setup You can set up your product to communicate directly with your computer or another device without requiring a wireless router or access point.
Parent topic: Wi-Fi or Wired Networking Enabling Wi-Fi Direct Mode You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point. 1. Press the 2. Press home button, if necessary. . 3. Select Wi-Fi Setup. You see a screen like this: 4. Scroll down and select Wi-Fi Direct Setup. 5. Select Connection Setup. 6. Select Change Password and select Yes.
7. Enter your Wi-Fi Direct password. Note: Your password must be at least 8 and no more than 22 characters long. • Press or to move the cursor. • Press to change the case of letters. • Press to delete the previous character. • Press to enter numbers and symbols. • Press 8. Press to enter a space. when you finish entering your password.
You see a screen like this: 9. Scroll down to view the SSID (Wi-Fi network name) and password. 10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown. 11. Press the home button to return to the Home screen. You see either an AP or Direct connection symbol on the LCD screen and should be able to print directly to your product from your computer or device.
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1.
If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown. Parent topic: Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network. 1. Press the home button, if necessary. 2. Select Setup.
You see a screen like this: 3. Select Network Status. 4. Select Wi-Fi/Network Status. You see a screen like this: Note: If you are connected to a wireless network, the signal strength is also displayed. 5. Select Print. 6. Press one of the buttons to print the network status sheet.
Examine the settings shown on the network status sheet to diagnose any problems you have. Parent topic: Wi-Fi or Wired Networking Changing or Updating Network Connections See these sections to change or update how your product connects to a network.
1. Do one of the following: • If you want to use only a Wi-Fi connection, disconnect the USB cable from your product. With Windows, also uninstall your product software. • If you want to add a Wi-Fi connection in addition to a USB connection, leave the USB cable connected to your product. 2. Download and install your product software from the Epson website using the instructions on the Start Here sheet.
2. Download and install your product software from the Epson website using the instructions on the Start Here sheet. Parent topic: Changing or Updating Network Connections Related tasks Uninstalling Product Software - Windows Disabling Wi-Fi Features You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection.
Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper in the Cassette Loading Paper and Envelopes in the Rear Paper Feed Slot Paper Loading Capacity Available Epson Papers Selecting the Paper Settings for Each Source - Control Panel Selecting Default Paper Settings - Administrator Installing and Enabling the Optional Second Paper Cassette Loading Paper in the Cassette You can load plain paper in these sizes in the paper cassette: • Letter (8.
2. Pull out the paper cassette. If you are loading paper in the optional cassette, remove the paper cassette cover. 3. Slide the edge guides outward. Note: If you are using legal-size paper, squeeze the tab and extend the paper cassette.
4. Set the front edge guide to the paper size you are using. 5. Load a stack of paper, printable side down, against the edge guide as shown. Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette.
6. Slide the edge guides against the paper, but not too tightly. If you are loading paper in the optional cassette, reattach the paper cassette cover. Note: Make sure the paper fits beneath the top edges of the guide. Caution: To prevent paper feeding problems, make sure you do not load too much paper in the cassette. 7. Keep the cassette flat as you gently insert it. 8. Select the size and type of paper you just loaded on the product LCD screen.
9. Extend the output tray and open the paper stopper. Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or insert the paper cassette during printing. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load the printable side facedown. • Load letterhead or pre-printed paper top edge first.
1. Extend the output tray and open the paper stopper. Note: If you are using legal-size or longer paper, do not open the paper stopper. 2. Pull up the paper support for the rear paper feed slot.
3. Flip the feeder guard forward, then slide the edge guides outward. 4. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. Note: You can load one sheet of binder paper with holes on one of the long edges as shown. Do not select automatic 2-sided printing for this type of paper.
5. Do one of the following: • Insert paper, glossy or printable side up and short edge first, in the center of the tray. Caution: To prevent paper feeding problems, make sure you do not load too much paper in the slot. • Load envelopes short edge first, with the flap facing down and the flap edge to the left, in the center of the slot.
6. Slide the edge guides against the paper, but not too tightly. 7. Select the size and type of paper you just loaded in the Paper Setup menu. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load the printable side faceup. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guides.
Paper Loading Capacity Paper type Loading capacity - paper cassette Loading capacity - rear paper feed slot Plain paper 250 sheets 80 sheets Letter (8.5 × 11 inches [216 × 279 mm]) and A4 (8.3 × 11.7 inches [210 × 297 mm]) 250 sheets 1 sheet Legal (8.5 × 14 inches [216 × 357 mm]) Epson Bright White Paper 200 sheets 50 sheets 20 sheets for manual two-sided printing Epson Presentation Paper Matte — 80 sheets Thick paper (cardstock up to 68 lb [256 g/m2]) — 10 sheets Letter (8.
Paper type Loading capacity - paper cassette Epson Premium Presentation Paper — Matte Loading capacity - rear paper feed slot 20 sheets Epson Premium Presentation Paper Matte Double-sided Epson Ultra Premium Presentation Paper Matte Epson Brochure & Flyer Paper Matte Double-sided Epson Photo Paper Glossy Epson Premium Photo Paper Glossy Epson Ultra Premium Photo Paper Glossy Epson Premium Photo Paper Semigloss Envelopes — 10 envelopes Parent topic: Loading Paper Available Epson Papers You can purcha
Paper Type Size Part number Sheet count Epson Presentation Paper Matte Letter (8.5 × 11 inches [216 × 279 mm]) S041062 100 Legal (8.5 × 14 inches [216 × 357 mm]) S041067 100 8 × 10 inches (203 × 254 mm) S041467 50 Letter (8.5 × 11 inches [216 × 279 mm]) S041257 50 S042180 100 Letter (8.5 × 11 inches [216 × 279 mm]) S041568 50 Epson Ultra Premium Presentation Letter (8.
Paper Type Size Part number Sheet count Epson Premium Photo Paper Semi-gloss 4 × 6 inches (102 × 152 mm) S041982 40 Letter (8.5 × 11 inches [216 × 279 mm]) S041331 20 Parent topic: Loading Paper Selecting the Paper Settings for Each Source - Control Panel You can change the default paper size and paper type for each source using the control panel on the product. 1. Press the home button, if necessary. 2. Select Setup . You see a screen like this: 3. Select Paper Setup . 4.
You see a screen like this: 5. Select Paper Size . 6. Select the paper size you loaded. 7. Select Paper Type . 8. Select the paper type you loaded. 9. Select OK . 10. Select another paper source to change or press home to return to the Home screen.
For this paper Select this Paper Type or Media Type setting Letterhead paper Letterhead Recycled paper Recycled Color paper Color Preprinted paper Preprinted Envelopes Envelope Epson Ultra Premium Photo Paper Glossy Ultra Glossy Epson Premium Photo Paper Glossy Prem. Glossy Epson Photo Paper Glossy Glossy Epson Premium Photo Paper Semi-gloss Prem. Semi-Gloss Epson Premium Presentation Paper Matte Prem.
Note: These settings can be locked by an administrator. If you can't access these settings, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup . You see a screen like this: 3. Scroll down and select System Administration . Enter the administrator password, if necessary.
4. Select Printer Settings . 5. Select the Paper Source Settings options you want to use. 6. Select one of these Auto Error Resolver options: • Turn on this setting to display a warning and print on one side of paper only when a 2-sided printing error occurs, or to print the data that the printer could process when a memory full error occurs. • Turn off this setting to display an error message and stop printing if an error occurs. 7.
Note: These settings can be locked by an administrator. If you can't access these settings, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup . You see this screen: 3. Scroll down and select System Administration . Enter the administrator password, if necessary.
4. Select Universal Print Settings . 5. Adjust the settings as necessary. 6. When you are finished, press the home button to return to the Home screen. Universal Print Settings Options Parent topic: Selecting Default Paper Settings - Administrator Universal Print Settings Options Select the Universal Print Settings you want to use. Universal Print Settings option Available settings Description Top Offset — Adjusts the top or left margin.
Parent topic: Loading Paper Installing the Optional Second Paper Cassette You can install the optional paper cassette to provide more paper capacity. 1. Turn off the product and unplug the power cord and any connected cables. Warning: To avoid electric shock, make sure you unplug the power cord. 2. Remove the paper cassette from its carton and place it where you want to set up the product. 3. Carefully lift the product as shown, then gently lower it onto the paper cassette.
Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals in the Automatic Document Feeder Placing Originals on the Scanner Glass You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 1.
Related topics Copying Scanning Faxing Placing Originals in the Automatic Document Feeder You can place multi-page original documents in the Automatic Document Feeder (ADF).You can also use the ADF to scan both sides of a 2-sided document. Make sure the originals meet the Automatic Document Feeder specifications before loading them. Caution: Make sure your originals are not creased or folded, and do not contain holes, staples, tape, or other materials that could obstruct the feeder. 1.
3. Insert the originals into the ADF faceup and top-edge first. The ADF icon on the control panel lights up. 4. Slide the ADF edge guide against the originals, but not too tightly.
Note: If you are copying two originals onto one sheet, make sure the originals are loaded as shown: Parent topic: Placing Originals on the Product Related topics Copying Scanning Faxing 74
Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Copying Options Copying Documents or Photos You can copy documents or photos onto various sizes and types of paper, including Epson special papers. 1. Place your original document or photo on the scanner glass, or place multi-page documents in the ADF. 2. Load the paper you want to print on. 3. Press the home button, if necessary. 4.
6. Change any of the displayed settings as necessary. 7. Select Settings to view and change additional copy settings, if necessary. Then press the button back 8. Select Preview to preview your copy on the LCD screen. 9. Select Preset to save your copy settings. Note: Presets can be locked by an administrator. If you can't access or change this setting, contact your administrator for assistance. 10. When you are ready to copy, press one of the Note: To cancel printing, press the buttons.
Copying option Available settings Description Zoom Custom Size Automatically sizes the image by the percentage you select Actual Size Copies at 100% size Auto Fit Page Automatically sizes the image to fit the paper size you selected Letter->4x6in and other conversions Automatically converts from one size to another Off Select to make 2-sided copies. When you select 1>2-Sided or 2>1-Sided, also select Advanced and select the binding edge for your originals or copies.
Copying option Available settings Description Dry Time Standard Select to adjust the drying time for 2-sided copies, if smudges or marks appear on the front of the paper when you print on the second side Long Longer Advanced Settings Various settings Select advanced settings such as Saturation and Sharpness Parent topic: Copying 78
Printing from a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select Enable automatic checking and click OK. The update scans your system to see if you have the latest product software. Follow the on-screen instructions.
3. If necessary, select your product name as the printer you want to use. Note: You may also need to select Properties or Preferences to view your print settings. You see the Main tab of your printer settings window: 4. For the Paper Source setting, select where you loaded the paper you want to print on. 5. Select the size of the paper you loaded as the Document Size setting. 6. Select the orientation of your document. Note: If you are printing an envelope, select Landscape.
7. Select the type of paper you loaded as the Paper Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 8. Select the Quality setting that matches the print quality you want to use. 9. Select a Color option: • To print a color document or photo, select the Color setting. • To print text and graphics in black or shades of gray, select the Black/Grayscale setting. 10.
Note: Paper Cassette 2 is available only if your product has two cassettes. Auto Select Automatically selects the paper source based on the selected paper size. Paper Cassette 1 Selects the paper in cassette 1 as the paper source. Paper Cassette 2 Selects the paper in cassette 2 as the paper source. Rear Paper Feed Slot Selects the paper in the rear feed slot as the paper source.
Parent topic: Selecting Basic Print Settings - Windows Selecting Double-sided Printing Settings - Windows You can print on both sides of the paper by selecting the 2-Sided Printing checkbox on the Main tab. Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network. 1. Select the 2-Sided Printing checkbox. 2.
You see this window: 4. Select the double-sided printing options you want to use. 5. Click OK to return to the Main tab. 6. Click the Print Density button.
You see this window: 7. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 8. If necessary, select the Adjustments options you want to use. 9. Click OK to return to the Main tab. 10. Print a test copy of your double-sided document to test the selected settings. 11. Follow any instructions displayed on the screen during printing.
Binding Margin Options Select options that define a wider margin to allow for binding. Start Page Selects whether printing starts on the front or back page. Create Folded Booklet Options Select the Booklet checkbox and a binding option to print double-sided pages as a booklet.
Selecting Additional Layout and Print Options - Windows You can select a variety of additional layout and printing options for your document or photo on the More Options tab. 1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options: • Select the Fit to Page option to size your image to fit the paper you loaded.
• Select Custom and click the Advanced button to manually adjust the color correction settings or turn off color management in your printer software. • Select Image Options to access additional settings for improving printed images. 3. To add the following features, click the Watermark Features button: • Anti-Copy Pattern: adds a watermark that only appears when your printout is copied. • Watermark: adds a visible watermark to your printout.
Custom Color Correction Options - Windows You can select any of the available options in the Color Correction window to customize the image colors for your print job. Color Controls Lets you select a Color Mode setting, individual settings for Brightness, Contrast, Saturation, and Density, and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting. Fix Photo Improves the color, contrast, and sharpness of flawed photos.
ICM Lets you manage color using installed color printing profiles. No Color Adjustment Turns off color management in your printer software so you can manage color using only your application software. Parent topic: Selecting Additional Layout and Print Options - Windows Image Options and Additional Settings - Windows You can select any of the Image Options and Additional Settings to customize your print. Some options may be pre-selected or unavailable, depending on other settings you have chosen.
Note: These settings are not saved with your document. You can select to print the following information: • User Name • Computer Name • Date • Date/Time • Collate Number (copy number) Note: The user name, computer name, date, and time come from the Windows Control Panel on your computer.
You see the available Printing Presets on the left: 2. Place your cursor over one of the Printing Presets to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK.
Selecting Extended Settings - Windows You can select additional settings that apply to all the print jobs you send to your product. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2. Select Printer Settings. 3. Click the Maintenance tab. You see the maintenance options: 4. Click the Extended Settings button.
You see this window: 5. Select any of the extended settings to customize your print. 6. Click OK to close the Extended Settings window. 7. Click OK to close the printer software window. Extended Settings - Windows Parent topic: Printing with Windows Extended Settings - Windows You can select from these settings on the Extended Settings window. Enable EPSON Status Monitor 3 Enables product monitoring for ink and paper supplies and other issues.
Page Rendering Mode Increases print speed when printing is extremely slow or the print head stops during printing. Print as Bitmap Increases print speed when printing is extremely slow or the print head stops during printing, and other settings do not help. Skip Blank Page Ensures that your product does not print pages that contain no text or images. Change Standard Resolution Reduces the resolution of print data to correct printing problems.
You see your application's Print window, such as this one: 2. Click OK or Print to start printing. Parent topic: Printing with Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in that program session. If you want to change the print settings you use in all your Windows programs, you can select new default print settings. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2.
You see the printer settings window: 3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK. These settings are now the defaults selected for printing. You can still change them as needed for printing in any program session. Changing the Language of the Printer Software Screens Parent topic: Printing with Windows Changing the Language of the Printer Software Screens You can change the language used on the Windows printer software screens. 1.
3. Click the Maintenance tab. You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product software.
You see this window: 3. Do one of the following: • To change how often the software checks for updates, select a setting in the Check every menu. • To disable the automatic update feature, select the Never option. 4. Click OK to exit. Note: If you choose to disable the automatic update feature, you can check for updates manually.
Selecting Double-sided Printing Settings - OS X Managing Color - OS X Selecting Printing Preferences - OS X Printing Your Document or Photo - OS X Parent topic: Printing from a Computer Selecting Basic Print Settings - OS X Select the basic settings for the document or photo you want to print. 1. Open a photo or document for printing. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command.
You see the expanded printer settings window for your product: Note: The print window may look different, depending on the version of OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing.
6. Select the page setup options: Paper Size and Orientation. Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings from the pop-up menu.
9. Select the Paper Source you wish to print from. 10. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 11. Select the Print Quality setting you want to use. 12. Select any of the available print options.
Draft For draft printing on plain paper. Normal For everyday text and image printing. Normal - Vivid For everyday text and image printing with good quality and print speed. Fine For text and graphics with good quality and print speed. Quality For text and graphics with increased quality and print speed. Best Quality For the best print quality, but the slowest print speed. Parent topic: Selecting Basic Print Settings - OS X Print Options - OS X You can select any of the print options to customize your print.
1. Select the size of the paper you loaded as the Paper Size setting. 2. Select the orientation of your document or photo as shown in the print window. Note: If you are printing an envelope, select the icon. Note: You can reduce or enlarge the size of the printed image by selecting Paper Handling from the pop-up menu and selecting a scaling option.
Selecting Double-sided Printing Settings - OS X You can print on both sides of the paper by selecting Two-sided Printing Settings from the pop-up menu on the print window. Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network. This screen may be different, depending on the version of OS X you are using. 1. Select one of the Two-sided Printing options.
2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 3. If necessary, customize the Adjustments settings as instructed on the screen. 4. Print a test copy of your double-sided document to test the selected settings. 5. Follow any instructions displayed on the screen during printing.
Two-sided Printing Options Long-Edge binding Orients double-sided printed pages to be bound on the long edge of the paper. Short-Edge binding Orients double-sided printed pages to be bound on the short edge of the paper. Adjustments Print Density Sets the level of ink coverage for double-sided printing. Increased Ink Drying Time Sets the amount of time required for drying ink after printing on one side of the paper before printing the other side in double-sided printing.
3. Select Color Options from the pop-up menu in the print window. Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu. 4. Select one of the available options. Color Matching and Color Options - OS X Parent topic: Printing with OS X Color Matching and Color Options - OS X You can select from these settings on the Color Matching and Color Options menus.
Color Options Settings Manual Settings Lets you select manual color adjustments. Click the arrow next to Advanced Settings and select settings for Brightness, Contrast, Saturation, and individual color tones. You can also select a color Mode setting for printing photos and graphics and the Fix Red-Eye setting to reduce or remove redeye in photos. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting.
You see a screen like this: 4. Select any of the available printing preferences. 5. Click OK. Printing Preferences - OS X Parent topic: Printing with OS X Printing Preferences - OS X You can select from these settings on the Options or Driver tab. Note: Automatic Cassette Switching is available only if your product has two cassettes. Thick paper and envelopes Prevents ink from smearing when you print on envelopes or other thick paper.
Permit temporary black printing Allows you to print using black ink when a color ink cartridge is expended. Automatic Cassette Switching Automatically switches to the other cassette when one of the cassettes runs out of paper. High Speed Printing Speeds up printing, but may reduce print quality. Warning Notifications Lets you choose whether or not to receive warning notifications from the printer software for various operating conditions.
Checking Print Status - OS X Parent topic: Printing with OS X Checking Print Status - OS X During printing, you can view the progress of your print job, control printing, and check ink cartridge status. 1. Click the printer icon when it appears in the Dock. You see the print status window: 2. Select the following options as necessary: OS X 10.5/10.6/10.7: • To cancel printing, click the print job and click the Delete icon. • To pause a print job, click the print job and click the Hold icon.
Parent topic: Printing Your Document or Photo - OS X Cancelling Printing Using a Product Button If you need to cancel printing, press the Stop button on your product.
Scanning You can scan original documents or photos and save them as digital files. Starting a Scan Selecting Epson Scan Settings Scanning with OS X Using Image Capture Scanning Special Projects Starting a Scan After placing your original documents or photos on your product for scanning, start scanning using one of these methods.
4. Select Scan. You see a screen like this: 5. Select one of the following Scan to options: • Memory Device saves your scan file on a memory or USB device and lets you select the file format, quality, and other settings. • Cloud sends your scanned files to a destination that you have registered with Epson Connect. • Document Capture Pro allows you to scan over a network using your saved job settings in Document Capture Pro or Document Capture.
Parent topic: Starting a Scan Related tasks Using Epson Scan to Cloud Using Presets Related topics Placing Originals on the Product Adding and Assigning Scan Jobs You can view, change, or add available default scan settings when you scan using the Document Capture Pro option on the product control panel. You do this by accessing the scan jobs in the Document Capture Pro (Windows) or Document Capture (OS X) program. 1. Start Document Capture Pro or Document Capture on a computer connected to the product. 2.
5. Select the jobs that you want to assign to any of the pull-down menus, click OK, then click OK again. You can now use the added scan jobs when you scan from the product control panel. Parent topic: Starting a Scan Using the Product Control Panel Starting a Scan with Document Capture Pro or Document Capture When you scan with Document Capture Pro (Windows) or Document Capture (OS X), the program automatically saves your scanned file on your computer in the folder you specify.
You see a window like this: 2. Click the Scan icon.
You see a window like this: Note: With OS X 10.6, 10.7, 10.8, or 10.9, you can download and install Epson Scan scanning software, which will provide additional image adjustment features within Document Capture. To download Epson Scan, visit Epson's driver download site (U.S. downloads or Canadian downloads).
• OS X: If you installed Epson Scan, close the Scan Settings window, open the Scan menu at the top of the screen and select Displays the EPSON Scan Setup Screen. Click the Scan icon. Select any displayed scan settings you want to use and click OK. 5. Click Scan. You see a preview of your scan in the Document Capture Pro or Document Capture window. 6. Check the scanned images and edit them as necessary. 7. Click one of the Destination icons to choose where to save your scanned file.
You see an Epson Scan window like this: Parent topic: Starting a Scan Related tasks Scanning with OS X Using Image Capture 122
Related topics Placing Originals on the Product Selecting Epson Scan Settings Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scanned image in the program. Note: With OS X 10.6, 10.7, 10.8, or 10.9, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software.
You see an Epson Scan window like this: Note: Epson Scan may start in a different mode when you first access it.
Related topics Placing Originals on the Product Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan Modes Selecting the Scan Mode Scanning in Office Mode Scanning in Professional Mode Image Preview Guidelines Scan Resolution Guidelines Selecting Scan File Settings Parent topic: Scanning Scan Modes Epson Scan provides a choice of scan modes with different levels of control over your settings.
Parent topic: Selecting Epson Scan Settings Scanning in Office Mode When you scan in Office Mode, Epson Scan automatically saves your scanned file in PDF format in your operating system's Documents or My Documents folder, or opens it in your scanning program. You can select settings, preview, and change the scanned file settings as necessary. 1. Start Epson Scan and select Office Mode as the Mode setting.
You see this window: 2. Select the Document Source setting indicating where you placed your original. To scan a 2-sided document in the ADF, select ADF-Double-sided. Note: If you are using the ADF, remove any documents from the scanner glass.
3. Select the Size and Orientation settings that match your original. 4. To scan both sides of a 2-sided original into one image, select a Stitch Images setting. Note: To use the Stitch Images setting, you must select ADF-Double-sided as the Document Source setting. 5. To allow Epson Scan to detect and correct any skew in your original, select Correct Document Skew. 6. To rotate your original in your scan, select a Rotate setting. 7. Select the Image Type setting that matches your original. 8.
Image Preview Guidelines Related tasks Selecting Scan File Settings Scanning in Professional Mode Available Document Source Settings - Office Mode You can select these Document Source options in Epson Scan Office Mode. Scanner Glass Selects the scanner glass as the location where the originals are placed on your product for scanning. ADF - Single-sided Selects the Automatic Document Feeder as the location where the originals are placed on your product for single-sided scanning.
1. In the Preview window, click the preview image.
2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.
Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan. Otherwise, only the area inside the currently selected marquee will be scanned. • To delete a marquee, click the marquee, then click the Delete Marquee icon. • To rotate your original in your scan, click one of the Rotate icons. 3. Click inside each scan area and make any necessary settings in the Epson Scan window.
Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges. Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only in your scanned image.) Text Enhancement Sharpens the appearance of letters in text documents.
You see this window: 134
2. Select the Document Type setting that matches your original, such as Reflective for documents or photos. 3. Select the Document Source setting indicating where you placed your original. To scan a 2-sided document in the ADF, select ADF - Double-sided. Note: If you are using the ADF, remove any documents from the scanner glass. 4. Select the specific type of original you are scanning as the Auto Exposure Type setting: Document or Photo. 5.
Available Image Types - Professional Mode Selecting a Scan Area - Professional Mode Available Image Adjustments - Professional Mode Selecting a Scan Size - Professional Mode Parent topic: Selecting Epson Scan Settings Related concepts Image Preview Guidelines Scan Resolution Guidelines Related tasks Selecting Scan File Settings Scanning in Office Mode Available Document Source Settings - Professional Mode You can select these Document Source options in Epson Scan Professional Mode.
Parent topic: Scanning in Professional Mode Selecting a Scan Area - Professional Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it. You can even select multiple scan areas to create multiple scanned images of different areas (Normal Preview mode only). You can also use the scan area to select specific Image Adjustments settings for a scanned image.
1. Do one of the following to select your scan area in the Preview image: • Normal preview: Click the image.
• Thumbnail preview: Your scan area is selected automatically, but you can change it. Place your cursor in one corner of the desired scan area, then click and drag the cursor to the opposite corner to create a marquee (dotted line) on the preview image. 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • Normal preview: To create additional marquees (up to 50, if available), click the Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Copy Delete Marquee icon.
Click the image adjustment icon to access additional settings. Click the + (Windows) or (OS X) icon next to a setting to change the level of adjustment. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges. Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers.
Saturation Adjusts the density of colors in the overall image. Color Balance Adjusts the balance of colors in the overall image. Color Palette Provides a graphical interface for adjusting mid-tone levels, such as skin tones, without affecting the highlight and shadow areas of the image. (For advanced users only.) Click the to access the settings.
A marquee (dotted line) appears on your preview image proportioned for the size you selected. 3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not change the target size of the scanned file.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save, and click OK. Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. 6. To use additional sizing tools, click the + (Windows) or and select options as desired. (OS X) icon next to the Target Size setting • Scale: Reduces or enlarges your image by the percentage you enter.
• Trimming: Turns automatic image cropping on or off. • Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.
Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. You can also select various optional settings that control how Epson Scan behaves when you scan and save files. The File Save Settings window may appear after you click Scan on the Epson Scan window. You may also be able to access the window by clicking the 146 icon on the Epson Scan window.
1. Do one of the following to select the folder in which you want to save your scanned image: • Click the button for one of the displayed folders. • Click the Other button, click the Browse or Choose button, and select a folder. 2. If you want to change the default name for your scanned image, click Edit and select the options you want. 3. Select the file format you want to use in the Image Format Type menu. 4. If your file format provides optional settings, click the Options button to select them. 5.
• If you need to delete or reorder the scanned pages, click Edit page. Delete or reorder the pages using the icons that appear on the bottom of the editing window. When you are finished, click OK. Note: If you installed an OCR (Optical Character Recognition) program, you may see a screen indicating the program is converting your page to text. Wait until the program re-scans the page and close the program, if necessary.
Optional Settings Overwrite any files with the same name Select to overwrite previous files with the same names. Show this dialog box before next scan Select to have the File Save Settings window appear automatically before you scan. Open image folder after scanning Select to have Windows Explorer or OS X Finder automatically open to the folder where your scanned image is saved after scanning.
4. Select the Scan Mode setting indicating where you placed your original (if available). Select any other scan settings as necessary.
Note: If you are scanning a multi-page document in the ADF, you can have Image Capture combine all the pages into a single document. After all pages have been scanned, you see the message No document loaded. . . . 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan. Your scanned file is saved in the folder you selected.
Scanning Special Projects Your product's scanning software offers various options to help you quickly complete special scan projects. Scanning to a SharePoint Server or Cloud Service Scanning Multi-Page Originals as Separate Files Parent topic: Scanning Scanning to a SharePoint Server or Cloud Service You can use Document Capture Pro to upload scanned images to a SharePoint server or a cloud service. 1. Do one of the following to start Document Capture Pro: • Windows 8.
2. Click the Scan icon. 3. Select any displayed scan settings you want to use. Note: See the Help information in Document Capture Pro or Document Capture for details. 4. Click Scan. You see a preview of your scan in the Document Capture Pro or Document Capture window. 5. Click one of the cloud service Destination icons to choose where to save your scanned file.
Scanning Multi-Page Originals as Separate Files You can use Document Capture Pro (Windows only) to scan multi-page originals as separate scanned files. You indicate where you want the new scanned files to start by inserting a blank page or barcode between the pages of your original. Note: The settings may vary, depending on the software version you are using. See the Help information in Document Capture Pro for details. 1.
4. Select any displayed scan settings you want to use. Note: See the Help information in Document Capture Pro for details. 5. Click Scan. You see a preview of your scan in the Document Capture Pro window. 6. Open the File menu and select Batch Save. 7. Click File Name Settings. 8. Select Apply Job Separation and click Separation Settings. 9. Select the method you used to separate the originals, select a folder name specification and click OK. 10.
Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or dispose of the product. This will erase all of your network settings and fax data.
DSL connection 1 Telephone wall jack 2 DSL filter 3 DSL modem ISDN connection (one phone number) 157
1 ISDN wall jack 2 Terminal adapter or ISDN router ISDN connection (two phone numbers) 1 ISDN wall jack 2 Terminal adapter or ISDN router 2. If you are connecting a telephone or answering machine to your product using a second phone cable, remove the cap from the EXT port on your product.
3. Connect a second phone cable to your telephone or answering machine and to the EXT port on your product. Note: If you connect an answering machine and Receive Mode is set to Auto, set the number of rings before your product answers a call to a number that is higher than your answering machine's setting for the number of rings. Any phone or answering machine must be connected to the EXT port for your product to detect an incoming fax call when the phone is picked up.
Parent topic: Faxing Setting Up Basic Fax Features See these sections to select the basic settings you need to use the product's fax features.
3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Select Common Settings. 5. Scroll down and select Country/Region. 6. Scroll up or down, if necessary, then select your country or region. You see a confirmation screen. 7. If the setting is correct, select Yes. (If not, select No and retry.) Note: Changing the country or region restores the fax settings to the default settings.
2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Select Common Settings. 5. Select Date/Time Settings. You see a screen like this: 6. Select Daylight Saving Time. 7.
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST) Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the season. When you change from Winter to Summer, your product automatically sets its clock ahead one hour. When you change from Summer to Winter, it sets its clock back one hour. 8. Select Date/Time. 9. Select the date format you want to use. 10. Use the numeric keypad to enter the current date. 11.
3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings. 5. Scroll down and select Fax Setting Wizard. The Fax Setting Wizard screen appears. 6. Select Start. 7. On the Fax Header screen, use the displayed keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. 8.
10. On the Receive Mode Setting screen, do one of the following: • If you have connected an external telephone or answering machine to the product, select Yes and go to the next step. • If you did not connect an external telephone or answering machine, select No and go to step 12. (Receive Mode is automatically set to Auto; otherwise you cannot receive faxes.) 11. On the next Receive Mode Setting screen, select Yes to receive faxes automatically or select No to receive faxes manually.
1. Press the home button, if necessary. 2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings. 5. Select Basic Settings. 6. Select Line Type. 7. Select PBX.
You see a screen like this: 8. Select Use. 9. Select Access Code. 10. Use the displayed keypad to enter the access code such as 9, and select OK. Parent topic: Setting Up Basic Fax Features Setting the Number of Rings to Answer If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct. The number of rings should be higher than the number of rings your answering machine is set to for answering a call.
2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings. 5. Select Receive Settings.
6. Select Rings to Answer. 7. Select the number of rings, and select OK. Make sure to select a number higher than the number of rings your answering machine is set to for answering a call. Note: An answering machine picks up every call faster than the product, but the product can detect fax tones and start receiving faxes. If you answer the phone and hear a fax tone, check that the product has started receiving the fax, then hang up the phone.
2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings.
You see a screen like this: 5. Select the group of settings you want to change. User Default Settings - Fax Send Settings - Fax Receive Settings - Fax Output Settings - Fax Basic Settings - Fax Security Settings - Fax Parent topic: Setting Up Fax Features Related topics Setting Up Basic Fax Features Sending Faxes Sending Faxes Receiving Faxes User Default Settings - Fax Set the default settings you want to use for faxing.
Setting Options Description Resolution Standard Adjusts the scan resolution and print quality of outgoing faxes. Fine Super Fine Ultra Fine Photo Density Document Size (Glass) Auto Automatically adjusts the darkness of outgoing faxes. Select this option when sending black-andwhite text documents. Manual Lets you select from various density levels. Half Letter Sets the size for a document placed on the scanner glass.
Send Settings - Fax Set the send options you want to use for outgoing faxes. Setting Options Description Batch Send Off Sorts outgoing faxes by recipient in the product's memory, and then sends them as a batch. On Save Failure Data Off Saves faxes that failed to be sent in the product’s memory. You can resend the faxes from the product's Status Menu. On Parent topic: Selecting Advanced Fax Settings Receive Settings - Fax Set the receive options you want to use for incoming faxes.
Setting Options Description Remote Receive Off Lets you start receiving faxes using your phone instead of operating the product (if the Receive Mode is set to Auto). When you select On, you must also set a Start Code. If you are using a cordless handset with its base connected to the product, you can start receiving the fax by entering the code using the handset.
Setting Options Description Fax Output Other Settings Lets you create a folder for saving faxes on a memory device and select settings for forwarding faxes. Save to Inbox Saves incoming faxes in the product's memory. You can view the faxes on the LCD screen and print if needed. Save to Computer To use this option, you must use the Epson FAX Utility. Select Yes and Print to have faxes saved to your computer and printed automatically.
Setting Options Description Print Suspend Time Off Select On to set a time period to stop automatic printing of faxes or reports and save received faxes in the product’s memory. (Make sure there is enough free memory before using this function.) On Time to Stop Restart Time Forwarding Report Print on Error Selects whether or when to print a report after an incoming fax is forwarded. Print Do Not Print Attach Image to Report Off Does not include an image of the fax on transmission reports.
Setting Options Description ECM On Turns on Error Correction Mode (ECM) to automatically correct errors in sent or received fax data. Off Turns off Error Correction Mode (ECM); color faxes cannot be sent or received. On Automatically dials the number you enter for faxing when the product detects a dial tone. Off Turns off automatic dial tone detection, which may be necessary if the product is connected to a PBX (Private Branch Exchange) or a TA (Terminal Adapter).
Setting Options Description Confirm Address List Off Selects whether or not to display a recipient confirmation screen before a fax is sent. On Inbox Password Settings Register Select to set a password for viewing incoming faxes. Backup Data Auto Clear Off Automatically erases sent or received fax data from your product's memory. On Clear Backup Data — Deletes all sent or received fax data remaining in your product's memory; run this function if you are giving away or disposing of your product.
You see this window: 3. Select Fax Settings for Printer. (Select your product, if prompted.
You see this window: 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility Help option. Parent topic: Setting Up Fax Features Related topics Setting Up Fax Features Setting Up Fax Features Using the Fax Utility - OS X You can set up your fax header and select your fax settings using the FAX Utility for OS X.
1. Do one of the following: • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select the FAX option for your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • OS X 10.5: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, select the FAX option for your product, and select Open Print Queue. Select Utility. 2. Double-click FAX Utility, if necessary.
Setting Up Contacts and Contact Groups You can set up a list of contacts and their fax numbers so you can quickly select them for faxing. You can also set up contact groups to send a fax message to multiple contacts.
You see a screen like this: 3. Select Contacts. Enter the administrator password, if necessary. You see a screen like this: 4. Select Menu.
You see a screen like this: Note: You can print your list of contacts and groups if necessary. 5. Select Add Entry. 6. Select the number you want to use for the contact you are adding. You see a screen like this: 7. Select the Name field, use the displayed keyboard to enter the contact name (up to 30 characters), and press .
8. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for an entry (up to 30 characters), and press . (This field is optional.) 9. Select the Fax Number field, and use the numeric keypad on the LCD screen or the buttons on the product to enter the fax number. You can enter up to 64 characters. Note: If necessary, enter an outside line access code (such as 9) at the beginning of the fax number.
You see a screen like this: 5. Do one of the following: • To delete the contact, select Delete and select Yes on the confirmation screen. • To edit the contact, select Edit, select the item you want to change, enter the correct information, and select . When you are finished editing, select Save. Parent topic: Setting Up Contacts Using the Product Control Panel Creating a Contact Group You can create a group of contacts so that you can easily send faxes to multiple recipients.
You see a screen like this: 3. Select Contacts. Enter the administrator password, if necessary. 4. Select Menu. You see a screen like this: Note: You can print your list of contacts and groups if necessary. 5. Select Add Group. 6. Select the number you want to use for the group you are adding.
You see a screen like this: 7. Select the Name field, use the displayed keyboard to enter the group name (up to 30 characters), and press . 8. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for a group (up to 30 characters), and press . (This field is optional.) 9. Select Proceed. You see your contacts list. 10. Select the number next to each contact you want to include in your group. A check mark appears next to each selected contact. 11. Select Save.
You see a screen like this: 3. Select Contacts. Enter the administrator password, if necessary. You see a screen like this, showing both individual contacts and contact groups: 4. Select the group you want to edit.
You see a screen like this: Note: If you want to delete the entire group, select Delete. 5. To edit the group, select Edit. 6. Select Proceed. You see a list of the contacts in your group. 7. To add or delete a contact, select the number next to it. 8. Select Save. Parent topic: Setting Up Contacts Using the Product Control Panel Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows You can set up your speed dial and group dial lists using the FAX Utility for Windows.
2. Select FAX Utility. You see this window: 3. Select Fax Settings for Printer. (Select your product, if prompted.
You see this window: 4. Select Speed Dial/Group Dial List.
You see this window: 5. Select an empty entry and click the icon. Note: To edit an entry, select it and click the icon. icon. To delete an entry, select it and click the 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group, enter a name, select your desired fax numbers, and click OK. 7. Repeat the previous steps as necessary to add all your speed dial or group dial entries. 8.
Setting Up Speed/Group Dial Lists Using the Fax Utility - OS X You can set up your speed dial and group dial lists using the FAX Utility. The utility also lets you import fax numbers from the MacAddress Book and back up fax numbers to your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1. Do one of the following: • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences.
You see this window: 5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group Dial, enter a name, select your desired fax numbers, and click OK. 7.
Sending Faxes See these sections to send faxes using your product. Sending Faxes from the Product Control Panel Sending Faxes Using the Fax Utility - Windows Sending Faxes Using the Fax Utility - OS X Parent topic: Faxing Sending Faxes from the Product Control Panel See these sections to send faxes using the product's control panel.
1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Select Fax. Note: To fax a double-sided document, place your document in the ADF and turn on the ADF 2Sided setting. (You cannot fax double-sided documents in color.) 4. Do one of the following to select fax recipients: • Manually enter a fax number: Press the Enter a Fax Number field and enter a fax number. Press when done. To add another fax number, repeat the same steps.
• Select from the sent fax history: Select History to display the sent fax history. Select a recipient from the list, select Menu, and select Send to this number. Note: To delete entered recipients, select the Enter a Fax Number field, select the recipient you want to delete, and select Delete from the List. 5. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your settings. 6. If you want to preview your fax in black-and-white on the LCD, select Preview.
Setting Options Description Resolution Standard Adjusts the scan resolution and print quality of outgoing faxes. Fine Super Fine Ultra Fine Photo Density Document Size (Glass) Auto Automatically adjusts the darkness of outgoing faxes. Select this option when sending black-and-white text documents. Manual Lets you select from various density levels. Half Letter Sets the size for a document placed on the scanner glass.
Parent topic: Sending Faxes from the Product Control Panel Sending a Fax at a Specified Time You can send a fax at a time of your choice. Note: Make sure the product's date and time settings are correct. You can only send faxes in black-andwhite when you use this option. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Select Fax. Note: To fax a double-sided document, place your document in the ADF and turn on the ADF 2Sided setting. 4.
9. Press one of the buttons. Note: To cancel faxing, press the Stop button. After scanning your originals, your product dials the number and sends the fax at the specified time. Note: If the product is turned off at the specified time, the fax is sent when it is powered on.
4. Select Menu. 5. Select Polling Send and select On. 6. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your settings. 7. Press the B&W button. Your document is scanned and stored until you overwrite or delete it. You can store only one document at a time. Subsequent documents overwrite the existing document. You can also delete a stored document from the Status Menu.
4. Select Menu. 5. Select Store Fax Data and select On. 6. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your settings. 7. Press the B&W button. Your document is scanned, stored, and briefly previewed. 8. When you are ready to send the document, press the Status button. You see a screen like this: 9. Select Job Monitor. 10. Select Communication Job. 11. Select the stored fax job you want to send. 12. Select Send/View and select Send.
Dialing Fax Numbers from a Connected Telephone If you have connected a telephone to the EXT port on your product, you can send a fax by dialing the fax number from the connected telephone. If the recipient's phone number and fax number are the same, you can speak to the recipient before sending the fax. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Dial the fax number from the connected telephone. Speak to the recipient if necessary. 4.
You see a window like this: 2. Select your product with the FAX option as the printer. 3. To change the Paper Size, Orientation, Color, Image Quality, or Character Density settings, click the Preferences or Properties button. Note: If you see a Setup, Printer, or Options button, click it. Then click Preferences or Properties on the next screen. For more information about selecting fax print settings, click Help. 4. Select the Page Range as necessary. (Leave the Number of copies set to 1.) 5. Click Print.
If you’re faxing for the first time, you see a window like this one: 6. Enter your sender information so that recipients can identify the origin of the fax. Then click OK to save the sender information.
You see a window like this: 7. Enter the recipient's name and fax number or select a recipient from the phonebook, then click Next. Note: For detailed instructions on using the Epson FAX Utility, click Help. 8. Select a cover sheet and enter a subject and message, then click Next. 9. Click Send to transmit your fax. Parent topic: Sending Faxes Sending Faxes Using the Fax Utility - OS X You can send a fax from a OS X printing program using the FAX Utility.
2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. Select your product FAX option as the Printer setting. 4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window. 5. Select the number of pages you are faxing as the Pages setting. Note: Leave the Copies setting set to 1. 6.
You see this window: 7. Do one of the following to choose your recipient: • Select a name or group from the Recipient List. • Enter a name, company, and fax number and click the + button. • Click the icon and select a recipient from your address book. 8. Select Fax Settings from the pop-up menu.
You see this window: 9. Select the Color and Image Quality settings you want to use for your fax. 10. Click Fax. Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product. Fax Reception Receiving Faxes Automatically Receiving Faxes Manually Receiving a Fax by Polling Viewing a Fax on the LCD Screen Parent topic: Faxing Fax Reception Your product will automatically receive and print faxes when you set the Receive Mode to Auto.
Note: If you run out of paper during fax printing, load more paper and press the button indicated on your product's LCD screen to continue. Parent topic: Receiving Faxes Receiving Faxes Automatically To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the product). To change the Receive Mode if necessary, select Setup > System Administration > Fax Settings > Receive Settings > Receive Mode.
Related tasks Receiving Faxes Automatically Receiving a Fax by Polling You can use polling to receive a fax from another fax machine (such as a fax information service). 1. Press the home button, if necessary. 2. Select Fax. You see a screen like this: 3. Select Menu. 4. Select Polling Receive and select On. 5. Enter the fax number you expect to receive the fax from. 6. Press one of the buttons to start receiving the fax.
1. Press the home button, if necessary. 2. Check the icon on the LCD screen. It turns on if there are any unread or unprinted faxes in the product's memory. 3. Select Fax. 4. Select Open Inbox. Enter the administrator password, if necessary. 5. Select the fax you want to view. You see the fax displayed on the screen. 6. Select Menu. 7. Select one of the printer/deleting options and follow the on-screen instructions.
2. Do one of the following: • To check the status of currrent fax jobs, select Job Monitor, select Communication Job, and select the fax job you want to check. • To check the history of faxes that have been sent or received, select Job History, select Receive Job or Send Job, and select the job you want to check. • To check received faxes that have been saved in the product's memory, select Job Storage and select Inbox.
Fax Report Options Select the fax report or list you want to print. Fax Settings List Print a list of the current fax communication settings. Fax Log View or print a report on recent fax transmissions. Last Transmission Print a report on the previous fax that was sent or received through polling. Stored Fax Documents Print a list of the fax jobs currently stored in the product's memory. Protocol Trace Print a detailed report for the previous sent or received fax.
Using USB Flash Drives With Your Product Follow the instructions here to work with a USB flash drive inserted into your product. Inserting a USB Flash Drive Removing a USB Flash Drive Viewing and Printing From the LCD Screen Transferring Files on a USB Flash Drive Inserting a USB Flash Drive Insert your USB flash drive into the USB port on the front of the product. Note: Epson cannot guarantee the compatibility of your device. Make sure the files on the device are compatible with the product.
1. If your product is connected to your computer using a USB cable, do one of the following: • Windows: Open the My Computer, Computer, or Windows Explorer utility. Then right-click the name of your flash drive (listed as a removable disk) and select Eject. • OS X: Drag the removable disk icon for your flash drive from the desktop into the trash. Caution: Do not remove a flash drive before completing the procedure above or you may lose data from the flash drive. 2.
You see a screen like this: Note: If you have more than 999 JPEG images on your device, the images are divided into groups, and you must first select the group you want to display. 4. Do one of the following to select your photos: • To select individual photos, select the thumbnail image of the photo you want to print, then use the numeric keypad on the control panel or press + or – on the LCD screen to select the number of copies (up to 99).
Print Setting Options - Device Mode Printing TIFF Files You can select and print files in the TIFF format from a USB flash drive or other device. 1. Press the home button, if necessary. 2. Select Memory Device. 3. Select TIFF. You see a list of the available files. 4. Select the file you want to print. You see information about the file. 5. Select Proceed. 6.
Photo adjustment settings Available options Description Fix Photo On Automatically adjusts the brightness, contrast, and saturation of the photo based on the Advanced > Scene Detection setting that is selected Off Turns off automatic adjustments; see Note below P.I.M.
Print settings Available options Description Fit Frame On Automatically crops the photo to fit into the selected photo layout Off Turns off automatic cropping On Prints at normal speed Off Slows down printing to improve print quality Last Page on Top Select the order for printing multi-page TIFF files.
3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Select Printer Settings. 5. Select Memory Device Interface. You see a screen like this: 6. Make sure Memory Device is set to Enable. 7. Select File Sharing. 8. Select the way your computer is connected to the product: either USB or Wi-Fi/Network.
• OS X with a USB connection: Look for the removable disk icon on your desktop, then select it. • OS X with a network connection: Select the hard drive icon on your desktop or select Computer from the Go menu, select your product in the SHARED section of the sidebar (you may need to widen the sidebar to see the name), and select the USBSTORAGE icon. 4. Select the folder that contains your files. 5. Drag the files you want to transfer to the desired folder on your computer or on your flash drive.
Replacing Ink Cartridges and Maintenance Boxes The maintenance box stores ink that gets flushed from the system during print head cleaning. When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it. You may also need to replace a cartridge that is more than six months old if your printouts do not look their best, even after cleaning and aligning the print head.
1. Press the Status button. 2. Select Printer Information. You see a screen like this: The ink and maintenance box levels are displayed at the bottom of the screen. Note: The displayed ink and maintenance box levels are approximate. 3. For more information, select the ink cartridge images at the bottom of the screen.
You see this window: 2. Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status. 3. To disable the low ink reminder, right-click the product icon in the Windows taskbar and select Monitoring Preferences.
You see this window: 4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox.
Checking Cartridge and Maintenance Box Status with OS X You can check the status of your ink cartridges and maintenance box using a utility on your Mac. 1. Do one of the following: • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • OS X 10.5: In the Apple menu or the Dock, select System Preferences.
3. Do the following as necessary: • You can update the ink cartridge and maintenance box status by clicking Update. • Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status.
Ink color Part number Standard-capacity High-capacity Extra High-capacity Black 786 786XL 788XXL Cyan 786 786XL 788XXL Magenta 786 786XL 788XXL Yellow 786 786XL 788XXL Parent topic: Purchase Epson Ink Cartridges and Maintenance Box Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones.
4. Push the ink cartridge in, then pull it out of the slot. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children.
5. Remove the cartridge from the package. Caution: Do not touch the green chip on the cartridge. Install the new cartridge immediately after removing the old one; if you do not, the print head may dry out and be unable to print. 6. Gently shake the ink cartridge horizontally for about five seconds as shown. Caution: Do not remove any labels or seals, or ink will leak.
7. Insert the new cartridge into the holder and push it in until it clicks into place. 8. Select Check on the LCD screen to make sure the cartridges are installed correctly. Caution: If you see a message that an ink cartridge is installed incorrectly, press in the ink cartridge until it clicks into place. 9. When you are finished, close the front cover. The product starts priming the ink and returns to its previous state when finished. Note: Do not turn off the printer during ink replacement.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with the label facing up; do not store cartridges upside-down.
6. Select the Black/Grayscale checkbox. 7. Click OK. 8. Print your document. Epson Status Monitor 3 displays a print message. 9. Click Print in Black to print your document. Parent topic: Printing With Black Ink and Expended Color Cartridges Printing With Expended Color Cartridges - OS X If printing stops, you can cancel your print job and select settings to temporarily print with only black ink on plain paper or on an envelope. 1. Click the printer icon in the Dock. 2.
You see a screen like this: 6. Select On as the Permit temporary black printing setting. 7. Click OK. 8. Close the utility window. 9. Load plain paper or an envelope in your product. 10. Access the print settings in your print application. 11. Select Print Settings from the pop-up menu. 12. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 13. Select the Grayscale option. 14. Click Print to print your document.
Conserving Low Black Ink with Windows The following window appears when black ink runs low and there is more color ink. Note: The window appears only when you have selected Plain Paper/Bright White Paper as the paper type setting, and depends on other selected print settings. To use this feature, Epson Status Monitor must be enabled. • Click Yes to use a mixture of color inks to create black, or No to continue using the remaining black ink for the document you are printing.
2. Remove the new maintenance box from its package. Caution: Do not touch the green chip on the maintenance box. 3. Press the buttons on the sides of the rear cover and remove it. 4. Grasp the maintenance box as shown and pull it out of its holder. Note: Do not tilt the used maintenance box or take it apart.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep the maintenance box out of the reach of children and do not drink the ink. 5. Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully. 6. Insert the new maintenance box into the holder and push it all the way in. 7.
Related references Ink Cartridge and Maintenance Box Part Numbers 241
Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head Maintenance Print Head Alignment Cleaning the Paper Guide Print Head Maintenance If your printouts become too light, or you see dark or light bands across them, you may need to clean the print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
1. Make sure there are no errors on the LCD screen and plain paper is loaded in the product. 2. Press the home button, if necessary. 3. Select Setup. 4. Select Maintenance. You see a screen like this: 5. Select Print Head Nozzle Check.
6. Press the Color button. The nozzle pattern prints. 7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 8. Do one of the following: • If there are no gaps, select Done. • If there are gaps or the pattern is faint, select Clean the Print Head and continue. 9. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary.
Checking the Nozzles Using a Computer Utility You can check the print head nozzles using a utility on your Windows or Mac computer. 1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the product. 3. Do one of the following: • Windows: Access the Windows Desktop and right-click the product icon in the Windows taskbar. • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences.
5. Click Print. 6. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 7. If there are no gaps, click Finish. If there are gaps or the pattern is faint, clean the print head.
Cleaning the Print Head Using the Product Control Panel Cleaning the Print Head Using a Computer Utility Parent topic: Print Head Maintenance Related tasks Removing and Installing Ink Cartridges Cleaning the Print Head Using the Product Control Panel You can clean the print head using the control panel on your product. 1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the product. 3. Press the home button, if necessary. 4. Select Setup. 5. Select Maintenance.
You see a screen like this: 7. Press the Color button to clean the print head. When the cleaning cycle is finished, you see a message on the screen. Caution: Never turn off the product during a cleaning cycle or you may damage it. 8. Select Print Nozzle Check Pattern. 9. Press the Color button to confirm that the print head is clean. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours.
3. Do one of the following: • Windows: Access the Windows Desktop and right-click the product icon in the Windows taskbar. • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • OS X 10.5: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, select your product, and select Open Print Queue.
Note: Do not open the front cover during the cleaning cycle. Caution: Never turn off the product during a cleaning cycle or you may damage it. 6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print. 7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning • If there are no gaps, click Finish.
Print Head Alignment If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning.
You see a screen like this: 7. Do one of the following: • If your printouts look blurry or vertical lines are misaligned, select Vertical Alignment. • If you see horizontal bands at regular intervals, select Horizontal Alignment. 8. Follow the on-screen instructions to print an alignment sheet. Note: Do not cancel printing while you are printing head alignment patterns. 9.
• If you printed a horizontal alignment sheet, select the number representing the pattern with the least amount of separation or overlap on the LCD screen. Parent topic: Print Head Alignment Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac. 1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the cassette (or in cassette 1 if your product has two cassettes). 3.
You see a window like this: 6. Check the printed pattern and follow the instructions on the screen to choose the number representing the best printed pattern for each set.
• After choosing each pattern number, click Next. • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment. Then print another alignment sheet and check it. Note: Click Skip (where available) if you want to skip a particular alignment sheet. 7. When you are done, click Finish. Parent topic: Print Head Alignment Cleaning the Paper Guide If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. 1.
You see a screen like this: 6. Scroll down and select Paper Guide Cleaning. 7. Select the paper source to clean. 8. Press the Color button. 9. Check the back of the ejected paper to see if it is clean. 10. Repeat as necessary until the paper comes out clean. Note: If the paper comes out stained even after several cleaning attempts, try cleaning the other paper sources.
Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Note: Close the rear paper feed slot and the output tray when you are not using the product to protect it from dust. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
5. Clean the scanner glass and the glass area on the left with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner. Caution: Do not spray glass cleaner directly on the glass and do not press the glass surface with any force. Note: If lines appear on the printout or in scanned images, carefully clean the scanner glass on the left. 6. Open the ADF cover and use a soft, dry, lint-free cloth (microfiber is recommended), to clean the rollers and the interior of the ADF.
Transporting Your Product If you need to ship your product or transport it a long distance, prepare it for transportation as described here. Caution: During transportation and storage, follow these guidelines: • Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak. • Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing. 1. Turn off the product. 2. Remove all the paper from the product.
Solving Problems Check these sections for solutions to problems you may have using your product.
• OS X: You can manually update the software by opening the Applications > Epson Software folder and selecting EPSON Software Updater. Parent topic: Solving Problems Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. You can also check for errors by pressing the Status button to display the Status Menu. Note: If the screen is dark, press the screen to wake the product from sleep mode.
LCD screen message Condition/solution Communication error See the link below to the Error Code section in this manual. Authentication error DNS error Recovery mode An error has occurred during firmware updating. Connect your product using a USB cable and try downloading the Firmware Update from the Epson support site. If you still need help, contact Epson for support.
Code Condition/solution 102 Collated printing has failed due to a lack of available memory. Reduce the size of the print job or print one copy at a time. 103 Print quality was decreased due to a lack of available memory. If the quality of the printout is unacceptable, try simplifying the page by reducing the number of graphics or the number and size of the fonts. 104 Reverse printing has failed due to a lack of available memory. Reduce the data size of the print job.
Code Condition/solution 208 The fax could not be sent to some of the specified recipients. Print a fax log to check which recipients failed to receive the fax. If the Save Failure Data setting is turned on, you can resend a fax from Job Monitor in the Status Menu. 301 401 302 There is not enough storage space available on the external memory device. Clear space on the device or use a different device. The external memory device is write-protected. Disable write protection.
Printing Fax Reports Related topics Wi-Fi or Wired Networking Sending Faxes Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load plain paper in the product. 3. Press the home button, if necessary. 4. Select Setup. 5. Select Maintenance. You see a screen like this: 6. Select Print Head Nozzle Check.
You see a screen like this: 7. Press the Color button. The nozzle pattern prints. 8. Do one of the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstalling your printer software.
Resetting Control Panel Defaults If you have a problem with settings on the product control panel, you can reset them to their factory defaults. You can choose which settings to reset or reset them all. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4.
6. Select Yes to reset the selected settings. (Select No if you want to cancel the operation.) Parent topic: Solving Problems Solving Setup Problems Check these sections if you have problems while setting up your product. Noise After Ink Installation Software Installation Problems Parent topic: Solving Problems Noise After Ink Installation If you hear noises from your product after installing ink, check the following: • The first time you install the ink cartridge, the product must prime its print head.
Related references Windows System Requirements OS X System Requirements Solving Network Problems Check these solutions if you have problems setting up or using your product on a network. Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.
obtain your product's MAC address, print a network status sheet. Then follow the instructions in your router or access point documentation to add the address to the list. • If your router or access point does not broadcast its network name (SSID), follow the instructions that came with your product to enter your wireless network name manually. • If your router or access point has security enabled, determine the kind of security it is using and any required password or passphrase for connection.
2. Windows only: uninstall your product software. 3. Initialize your router following the instructions in your router documentation. Note: If you are reading these instructions online, you will lose your internet connection when you initialize your router, so note the next step before initializing it. 4. Download your product software from the Epson website using the instructions on the Start Here sheet. • If you have replaced your router, reinstall your product software to connect to the new router.
• Print a network status sheet and verify that the network settings are correct. If the network status is Disconnected, check any cable connections and turn your product off and then on again. • If you are using TCP/IP, make sure the product's IP address is set correctly for your network. If your network does not assign IP addresses using DHCP, set the IP address manually. • Make sure your computer and product are both using the same wireless network.
Cannot Scan Over a Network If you cannot start Epson Scan for scanning over a network, try these solutions: • If you cannot scan from your product control panel, make sure you restarted your computer after installing the product software. Make sure the Event Manager program is not being blocked by your firewall or security software. • If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution.
Solving Copying Problems Check these solutions if you have problems copying with your product. Product Makes Noise, But Nothing Copies Product Makes Noise When It Sits for a While Parent topic: Solving Problems Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it from the rear feed slot or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • Do not load more than the recommended number of sheets.
2. Open the front cover. 3. Remove any paper inside, including torn pieces. 4. Close the front cover.
5. If any jammed paper remains near the output tray, carefully remove it. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
4. Carefully remove any paper jammed inside the product. 5. Carefully follow all paper loading instructions and reload the paper. 6. Keep the cassette flat as you gently insert it. 7. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Document Jams in the Automatic Document Feeder Paper Jam Problems in the Duplexer (Rear Cover) If paper has jammed in the duplexer, follow the steps here to clear the jam. 1. Cancel the print job from your computer, if necessary. 2. Press the buttons on the sides of the rear cover and remove it. 3. Carefully remove any jammed paper.
4. Remove any jammed paper from the duplexer. 5. Press the buttons on the rear cover as you reattach it. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Document Jams in the Automatic Document Feeder If you have problems with document jams in the automatic document feeder (ADF), follow the steps here to clear the jam. 1. Cancel the print job, if necessary. 2. Remove your originals from the ADF. 3. Open the ADF cover. 4. Carefully remove any jammed pages. Caution: Make sure you open the ADF cover before removing any jammed paper. Otherwise the product may be damaged.
5. Close the ADF cover open, then raise the document cover. 6. Carefully remove any jammed pages. 7. Lower the document cover.
8. Raise the ADF input tray. 9. Carefully remove any jammed pages. 10. Lower the ADF input tray. 11. Reload your originals. Caution: Make sure you do not load the ADF beyond its capacity for your paper size. Also make sure the originals you load are not bent, folded, or curled and do not have tape, staples, or other materials that could obstruct the feeder. 12. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Related references Paper Jam Problems in the Cassette Paper Jam Problems Inside the Product Paper Jam Problems in the Duplexer (Rear Cover) Related topics Loading Paper Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint. • If paper is wrinkled when it ejects, it may be damp or too thin.
Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your product is turned on. • Make sure any interface cables are connected securely at both ends. • If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print, connect your product directly to your computer instead of the hub. • Run a product check to see if a test page prints. If the test page prints, check to see if your product software is installed correctly.
• Windows 7: Click and select Devices and Printers. • Windows Vista: Click , select Control Panel, and click Printer under Hardware and Sound. • Windows XP: Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware, if necessary, and Printers and Faxes.) 2. Right-click your product name, select Printing Preferences, and select your product name again if necessary. 3. Click the Maintenance tab. 4. Click the Extended Settings button. 5.
• Make sure the ink drying time has not been increased for double-sided printing.
Inverted Image If your printed image is inverted unexpectedly, try these solutions: • Turn off any mirror or inversion settings in your printing application. • Turn off the Mirror Image, Flip horizontally, or Reverse page orientation settings in your printer software. (This option has different names, depending on your operating system version.) Note: Leave these options turned on when you print on Epson Iron-on Cool Peel Transfer paper, if available for your product.
Related concepts Print Head Cleaning Print Head Nozzle Check Related tasks Selecting Extended Settings - Windows Selecting Basic Print Settings - OS X Selecting Basic Print Settings - Windows Incorrect Margins on Printout If your printed page has incorrect margins, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software. • Make sure you selected the correct margins for your paper size in your printing program.
• Windows Vista: Click and select Control Panel. Click Printer under Hardware and Sound, right-click your product name, and select Open. Right click the stalled print job, click Cancel, and click Yes. • Windows XP: Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware if necessary, and select Printers and Faxes.) Right-click your product name, select Open, right-click the stalled print job, click Cancel, and click Yes.
Related tasks Selecting Basic Print Settings - OS X Selecting Basic Print Settings - Windows Related topics Loading Paper Solving Print Quality Problems Check these sections if your printouts have problems with print quality, but your image looks fine on your computer screen. Note: When printing using AirPrint, the available print settings are different from those covered in this manual. See the Apple website for details.
Print Head Cleaning Print Head Alignment Related references Paper Type Settings Related tasks Selecting Additional Layout and Print Options - Windows Related topics Loading Paper Replacing Ink Cartridges and Maintenance Boxes Blurry or Smeared Printout If your printouts are blurry or smeared, try these solutions: • Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. • Use a support sheet with special paper, or load special paper one sheet at a time.
Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.
Related concepts Print Head Nozzle Check Print Head Cleaning Print Head Alignment Related references Paper Type Settings Related tasks Cleaning the Paper Guide Selecting Basic Print Settings - Windows Selecting Basic Print Settings - OS X Related topics Loading Paper Replacing Ink Cartridges and Maintenance Boxes Grainy Printout If your printouts are grainy, try these solutions: • Make sure you loaded the printable side of the paper correctly for your product.
Related concepts Print Head Nozzle Check Print Head Cleaning Print Head Alignment Related references Paper Type Settings Related tasks Cleaning the Paper Guide Selecting Basic Print Settings - Windows Selecting Basic Print Settings - OS X Selecting Additional Layout and Print Options - Windows Selecting Printing Preferences - OS X Related topics Loading Paper Replacing Ink Cartridges and Maintenance Boxes Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the Black/G
Related tasks Selecting Basic Print Settings - Windows Selecting Basic Print Settings - OS X Selecting Additional Layout and Print Options - Windows Managing Color - OS X Related topics Replacing Ink Cartridges and Maintenance Boxes Solving Scanning Problems Check these solutions if you have problems scanning with your product.
OS X System Requirements Related tasks Scanning with OS X Using Image Capture Cannot Start Epson Scan If you cannot start Epson Scan, try these solutions: • Make sure your product is turned on and any interface cables are securely connected at both ends. • Make sure Epson Scan is selected in your scanning program. • Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so, wake your system and restart Epson Scan.
Solving Scanned Image Quality Problems Check these sections if a scanned image on your computer screen has a quality problem.
Caution: Do not spray glass cleaner directly on the scanner glass. Parent topic: Solving Scanned Image Quality Problems Related tasks Cleaning Your Product Straight Lines in an Image Appear Crooked If straight lines in an original appear crooked in a scanned image, make sure to place your original straight when you scan it.
Image is Too Dark If your scanned image is too dark, try these solutions: • Adjust these Epson Scan settings (if available) and try scanning again: • Auto Exposure • Brightness • Histogram Adjustment • Check the brightness and contrast settings of your computer monitor.
To adjust the colors in your scanned image, adjust these Epson Scan settings (if available) and try scanning again: • Change the Image Type setting and experiment with different combinations of the next settings. • Adjust the Tone Correction setting. • Adjust the Auto Exposure setting.
Parent topic: Solving Problems Cannot Send or Receive Faxes If you cannot send or receive faxes, try these solutions: • Make sure the recipient's fax machine is turned on and working. • Make sure paper is loaded correctly in your product. • Make sure you have set up your header information and have not blocked your caller ID. Otherwise, your faxes might be rejected by the recipient's fax machine. • Make sure Receive Mode is set to Auto so you can receive faxes automatically.
Parent topic: Solving Faxing Problems Related tasks Connecting a Telephone or Answering Machine Using the Fax Setup Wizard Selecting the Line Type Selecting Advanced Fax Settings Selecting Advanced Fax Settings Printing Fax Reports Printing Fax Reports Receiving Faxes Automatically Related topics Loading Paper Cannot Receive Faxes with a Telephone Connected to Your Product If you cannot receive faxes when a telephone is connected to your product, try these solutions: • Make sure your telephone is connected
Uninstalling Product Software - Windows You can uninstall and then re-install your product software to solve certain problems. 1. Turn off the product. 2. Disconnect any interface cables. 3. Do one of the following: • Windows 8.x: Navigate to the Apps screen and select Control Panel > Programs > Programs and Features. Select the uninstall option for your Epson product, then select Uninstall/Change. Note: If you see a User Account Control window, click Yes or Continue.
Uninstalling Product Software - OS X In most cases, you do not need to uninstall your product software before re-installing it. However, you can download the Uninstaller utility from the Epson support website to uninstall your product software as described here. Note: If you find that re-installing your product software does not solve a problem, contact Epson. 1. To download the Uninstaller utility, visit the Epson download site (U.S. downloads or Canadian downloads). 2.
• Proof of purchase (such as a store receipt) and date of purchase • Computer configuration • Description of the problem Then call: • U.S.: (562) 276-4382, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday • Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal.
• Windows Server 2008* • Windows Server 2003* * When you use Windows Server, you can only print. Scanning and any additional included software are not supported. Note: Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for the latest in compatibility and drivers for your product. Parent topic: Technical Specifications OS X System Requirements To use your product and its software, your Mac should use one of these operating systems: • OS X 10.9.x • OS X 10.8.x • OS X 10.7.
Scanning Specifications Scanner type Flatbed, color Photoelectric device CIS Effective pixels 10200 × 14040 pixels at 1200 dpi; scanning area may be restricted if resolution setting is large Document size Maximum: A4 (8.3 × 11.7 inches [210 × 297 mm]) or Letter (8.
Parent topic: Technical Specifications Fax Specifications Fax type Walk-up black-and-white and color fax capability (ITU-T Super Group 3) Supported lines Standard analog telephone lines PBX (Private Branch Exchange) telephone systems Speed Up to 33.
reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper. Single-sheets Size B5 (7.2 × 10.1 inches [182 × 257 mm]) A4 (8.3 × 11.7 inches [210 × 297 mm]) A5 (5.8 × 8.2 inches [148 × 210 mm]) A6 (4.1 × 5.8 inches [105 × 148 mm]) Letter (8.5 × 11 inches [216 × 279 mm]) Legal (8.5 × 14 inches [216 × 357 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) Executive (7.25 × 10.5 inches [184 × 267 mm]) 16:9 wide (4 × 7.
Single sheets 1 Top: 0.12 inch (3 mm) minimum 2 Left: 0.12 inch (3 mm) minimum 3 Right: 0.12 inch (3 mm) minimum 4 Bottom: 0.
1 Left: 0.12 inch (3 mm) minimum; 1.89 inches (48 mm) recommended 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.12 inch (3 mm) minimum; 0.83 inch (21 mm) recommended Parent topic: Technical Specifications Ink Cartridge Specifications Note: This product uses only genuine Epson-brand cartridges. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly.
Dimension Specifications Height Stored: 13.5 inches (342 mm) Printing: 15.1 inches (383 mm) Width Stored: 18.1 inches (461 mm) Printing: 18.1 inches (461 mm) Depth Stored: 16.6 inches (422 mm) Printing: 25.8 inches (655 mm); with the output tray extension extended Weight 31.3 lb (14.
Environmental Specifications Temperature Operating: 50 to 95 °F (10 to 35 °C) Storage: –4 to 104 °F (–20 to 40 °C) 1 month at 104 °F (40 °C) Humidity Operating: 20 to 80% RH (without condensation) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed USB (Device Class for computers) Hi-Speed USB (for Mass storage class for external storage) External USB devices MO drive: 1.
Security WEP (64/128 bit) WPA-PSK (AES); complies with WPA2 with support for WPA/WPA2 Personal WPA2-Enterprise Frequency band 2.4 GHz Communication mode Infrastructure mode Ad hoc mode Wi-Fi Direct Note: Wi-Fi Direct Simple AP mode available even if you connect the product to an Ethernet network. Ethernet Standard IEEE802.3i/u/ab, IEEE802.
Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B class B Canada Safety: CAN/CSA C22.2 No. 60950-1 EMC: CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module: • Manufacturer: Askey Computer Corporation. • Type: WLU6117-D69 (RoHS) This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules.
Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal. General Product Safety Instructions FCC Compliance Statement Software Notice Trademarks Copyright Notice General Product Safety Instructions • Be sure to follow all warnings and instructions marked on the product.
• Allow space behind the product for the cables, and space above the product so that you can fully raise the document cover. • Leave enough space in front of the product for the paper to be fully ejected. • Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. • Do not place or store the product outdoors. • Do not place the product near excessive heat sources or in direct sunlight. • Leave enough room around the product for sufficient ventilation.
• When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak. Ink Cartridge Safety Instructions LCD Screen Safety Instructions Wireless Connection Safety Instructions Telephone Equipment Safety Instructions Parent topic: Notices Ink Cartridge Safety Instructions • Keep ink cartridges out of the reach of children and do not drink the ink.
Parent topic: General Product Safety Instructions LCD Screen Safety Instructions • Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers. • If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.
FCC Compliance Statement For United States Users This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments ("ACTA") . On the surface of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. Applicable certification jack Universal Service Order Codes ("USOC") for the equipment: RJ11C.
This equipment may not be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. For Canadian Users 1. This product meets the applicable Industry Canada technical specifications. 2. The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface.
This printer product includes software developed by the OpenSSL project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). 5. The license terms of each open source software program are described in OSS.pdf on the Epson support site. 6. The list of open source software programs which this printer product includes are as follows.
Net-SNMP license This printer product includes the open source software program "Net-SNMP" which applies the terms and conditions provided by owner of the copyright to the "Net-SNMP". OpenSSL License/Original SSLeay License This printer product includes t he open source software program "OpenSSL toolkit" which applies the license terms of OpenSSL License and Original SSLeay License.
This printer product includes the open source software program "OpenLDAP 2.4.30" which applies the terms and conditions provided by owner of the copyright to the "OpenLDAP". IPsec-Tools license This printer product includes the open source software program "IPsec-Tools 0.8.0" which applies the terms and conditions provided by owner of the copyright to the "IPsec-Tools".
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
A Note Concerning Responsible Use of Copyrighted Materials Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume. Contact your legal advisor for any questions regarding copyright law.