Administrator's Guide

You see a window like this:
3. Select the certificate you want to use as the Use the following CA Certificate option.
4. Select the certificate you want to use as the Use the following Client Certificate option.
5. Click Next.
You see a confirmation message.
6. Click OK.
Parent topic: Connecting the Product to an IEEE802.1X Network
IEEE802.1X Network Status
You can check the status of the IEEE802.1X network settings by printing a status sheet from your
product. See the product's User's Guide for instructions on printing a network status sheet.
The network status sheet displays the information in this table for IEEE802.1X networks.
Status ID Status description
Disable IEEE802.1X is disables
EAP Success IEEE802.1X authentication in confirmed and the network is connected
Authenticating IEEE802.1X authentication in progress
Config Error Authentication has failed because the user ID was not set
Client Certificate Error Authentication has failed because the client certificate is out of date
Timeout Error Authentication has failed because there is no answer from the RADIUS
server and/or authenticator
29