Administrator's Guide

8. Select the LDAP search settings you want to use.

9. Click OK.

Parent topic: Using an LDAP Server

LDAP Server Settings

You can configure these LDAP server settings in Web Config.

Setting Options/Description

LDAP Server Address Enter the address of the LDAP server as necessary,

depending on the format of the server:

• IPv4 or IPv6 format: Enter from 1 to 255 characters

• FQDN format: Enter from 1 to 255 alphanumeric characters

in ASCII; you can use "-", except at the beginning or end of

the address

LDAP server Port Number Enter an LDAP server port number between 1 and 65535

Search Timeout (sec) Enter a search time interval before timeout from between 5

and 300 seconds

Authentication Method Select one of the available authentication methods listed

User Name Enter a user name for the LDAP server from 0 to 128

characters long in Unicode (UTF-8); do not use control

characters such as 0x00-0x1F or OX7F (not available when

you selected Anonymous Authentication as the

Authentication Method option)

Password Enter a password from 0 to 128 characters long in Unicode

(UTF-8) for LDAP server authentication; do not use control

characters such as 0x00-0x1F or OX7F (not available when

you selected Anonymous Authentication as the

Authentication Method option)

Kerberos Server Address If you selected Kerberos Authentication as the

Authentication Method option, enter the Kerberos server

port number between 1 and 65535

Kerberos Server Port Number If you selected Kerberos Authentication as the

Authentication Method option, enter