Administrator's Guide

1. Access Web Config and select Wi-Fi/Network Settings.

2. Select LDAP Server and select Connection Test.

3. Click Start.

Web Config tests the connection and displays the connection report when it is finished.

Parent topic: Using an LDAP Server

LDAP Connection Report Messages

You can review the connection report messages to diagnose LDAP connection problems in Web Config.

Message Description

Connection test was successful. Connection to the server is successful

Connection test failed. Check the One of the following has occurred:

settings.

• The LDAP server address or port number is incorrect

• A timeout has occurred

• You selected Do Not Use as the Use LDAP Server setting

• If you selected Kerberos Authentication as the

Authentication Method setting, the Kerberos server

settings are incorrect

Connection test failed. Check the Connection has failed because the time settings for the

date and time on your printer or product and the LDAP server do not match

server.

Authentication failed. Check the Authentication has failed because the User Name and

settings. Password settings are incorrect or, If you selected Kerberos

Authentication as the Authentication Method setting, the

time and date are not configured correctly

Cannot access the printer until The product is busy.

processing is complete.

Parent topic: Using an LDAP Server

Using an Email Server

Follow the instructions in these sections to use an email server to send scan and fax data by email, or

use email notification using Web Config.