Administrator's Guide

Using EpsonNet Config Network Configuration Software

Follow the instructions in these sections to configure your product's administrator network settings using

the EpsonNet Config software.

With Windows, you can configure network settings in a batch operation. See the EpsonNet Config help

utility for instructions.

Note: Before you can configure system administration settings, connect the product to a network. See

the product's Start Here sheet and User's Guide for instructions.

Installing EpsonNet Config

Configuring a Product IP Address Using EpsonNet Config - Ethernet

Configuring a Product IP Address Using EpsonNet Config - WiFi

Installing EpsonNet Config

To install EpsonNet Config, download the software from the product's support page at

epson.com/support and follow the on-screen instructions.

Parent topic: Using EpsonNet Config Network Configuration Software

Configuring a Product IP Address Using EpsonNet Config - Ethernet

You can configure the product's IP address using EpsonNet Config.

1. Turn on the product.

2. Connect the product to a network using an Ethernet cable.

3. Do one of the following to start EpsonNet Config:

• Windows 8.x: Navigate to the Apps screen and select EpsonNet Config under EpsonNet.

• Windows (other versions): Click or Start, and select All Programs or Programs. Select

EpsonNet and click EpsonNet Config.

• OS X: Open the Applications folder, open the Epson Software folder, select EpsonNet, select

EpsonNet Config, and double-click the EpsonNet Config icon.

After a few moments, the program displays the connected products.