Administrator's Guide

4. Double-click the product you are configuring.

Note: If several products of the same model are connected, you can identify them by their MAC

address.

5. From the menu on the left, select Network Interface, select TCP/IP, and select Basic.

You see a window like this:

6. Enter the product's IP address, Subnet Mask, and Default Gateway settings in the fields provided.

Note: To connect the product to a secure network, enter a static IP address. You can also configure

the DNS settings by selecting DNS, and enter proxy settings by selecting Internet from the TCP/IP

menu.

7. Select Transmit.

Parent topic: Using EpsonNet Config Network Configuration Software

Configuring a Product IP Address Using EpsonNet Config - WiFi

You can configure the product's IP address using EpsonNet Config.

1. Turn on the product.

2. Connect the product to a network using an Ethernet cable.

3. Do one of the following to start EpsonNet Config:

• Windows 8.x: Navigate to the Apps screen and select EpsonNet Config under EpsonNet.