Administrator's Guide

Message Solution
Invalid value below. Remove any unsupported characters in the file
path and password.
Invalid date and time. Set the date and time on the product using Web
Config, EpsonNet Config, or the product control
panel.
Invalid password Enter the password that matches the password set
for the CA certificate.
Invalid file Try the following:
Import only certificate files in X509 format sent
by a trusted certificate authority.
Make sure the file size is 5KB or less and is not
corrupted or fabricated.
Make sure the chain in the certificate is valid;
check the certificate authority's website.
Cannot use the Server Certificates that include Import certificate files in PKCS#12 format that
more than three CA certificates. contains one or two CA certificates, or convert
each certificate to PRM format and import them
again.
The certificate has expired. Check if the certificate Make sure the product time and date are set
is valid, or check the date and time on your printer. correctly and, if the certificate is out of date, obtain
and import a new certificate.
Private key is required. Do one of the following to pair a private key with
the certificate:
For PEM/DER format certificates obtained from
a CSR using a computer, specify the private key
file.
For PKCS#12 format certificates obtained from
a CSR using a computer, create a file containing
the private key.
If you re-imported a PEM/DER format certificate
obtained from a CSR using Web Config, you can
only import it once. You must obtain and import a
new certificate.
52