User's Guide

4. Select Wi-Fi Setup Wizard.

Note: If you need to disable the wireless network to set up your product on an Ethernet network,

scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired

network connection in this guide.

5. Select the name of your wireless network or enter the name manually.

Note: To enter the wireless network name manually, select Other Networks and select the

Network (SSID) field. Use the displayed keypad to enter your network name.

6. Select the Password field and enter your wireless password using the displayed keypad.

Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and

lowercase letters, and numeric or special characters.

• Press or to move the cursor.

• Press to change the case of letters.

• Press to delete the previous character.

• Press to enter numbers and symbols.

• Press to enter a space.

7. Press when you finish entering your password and select Proceed.