Equity User Manual

You see a message on the screen that tells you the disk drive’s
read/write heads will remain locked until you reset the
computer or turn the power off and on again. The computer
locks the heads and disables the keyboard. Remove any
diskettes and turn off the computer. You are now ready to
move it to the new location.
Note
For convenience, you may want to copy the following two
files from the Reference diskette to your hard disk:
HDSIT.COM HDSIT.VER
Then, when you want to run HDSIT, just log onto the
directory on your hard disk where you stored the files,
type H DS IT, and press Enter. See your MS-DOS manuals for
instructions on using the COPY command.
If you have a 51/4-inch diskette drive and you still have the
original diskette drive protector card, you may want to insert
it into the drive prior to shipping your computer to protect
the read/write heads.
3-20 Using Your Computer