Setup guide

The first option is highlighted. Press m to highlight
Run
SETUP , and then press m. The SETUP menu appears
on the screen.
The menu automatically displays the base memory size, the
extended memory size, and whether a math coprocessor
(numeric processor) is installed. Additionally, the SETUP menu
lists the parameters you can change.
Selecting Options
A solid cursor bar highlights the parameter currently selected.
You can scroll through the
keys Cm, m. t
d
parameters using the four arrow
[11). When you reach a
parameter you want to change, press &&J or m to display
and select the available options.
An information window at the bottom of the menu describes
the options available or any other keys you can press to change
the highlighted parameter.
The rest of this chapter describes how to choose the correct
SETUP parameters for your system.
Setting the Date and Time
The real-tune clock in your computer continously tracks the
date and time-even when the computer is turned off. Once
you set the date and time using SETUP, you should not need to
change either parameter, unless you need to adjust the time for
daylight savings. (The computer automatically changes the
date for leap years.)
Running the SETUP Program
2-3