Setup guide

Setting the Password
The SETUP program lets you set an optional password to
control who can use your system. If you do not want to set a
password for your computer, skip this section.
Once you set a password through SETUP, you must enter it
every time you turn on your computer or reset it by pressing
the RESET button. If you do not enter it correctly, you cannot
access your system.
To set a password, move the cursor to the Password option.
Next to it, you see Not installed. (If you have already set a
password you see Installed.) Press
b
U ormto
display the following:
New Install
********
Now type the password you want to use. You can type up to
eight characters using the letter or number keys, in upper- or
lowercase. For example, you could enter the following:
123aBcl
You can use the backspace key to correct mistakes. After you
type the password, press
d
EIW .
Note
Be sure to remember the password you enter or write it
down and keep it in a safe place. If you cannot remember
it, you will not be able to access the computer the next time
you turn it on. If you forget your password, however, there
is a way to disable the function. See “Password Problems” in
Appendix C of the User's Guide for more information.
2-10 Running the SETUP Program