User Guide Desktop PC Equity 386SX/16 PLUS

There are two or three holes on each side of the disk

drive. When you insert the drive, align the appropriate

round holes in the drive with the two oval holes on each

side of the drive bay, as shown below.

Insert the drive in the lower drive bay and slide it toward

the back of the subassembly. Watch the oval holes on the

side of the drive bay so you can see when the holes on

the drive are positioned in the middle of them.

If you are installing a diskette drive, adjust its position so

that the front of the drive lines up with the drive in the

upper bay. (A hard disk drive fits all the way into the

bay.)

B-34

Installing and Removing Disk Drives