User Guide Desktop PC Equity 386SX/16 PLUS

Connect the diskette drive ribbon cable first. As shown

below, there is a tab on one side of the connector.

diskette drive connector

tab

diskette drive socket

notch

Align the connector with the socket so that the tab on

the connector lines up with the notch in the socket.

Make sure the holes in the connector fit over all the pins

in the socket and then push in the connector.

Caution

If you do not correctly align the holes with the ping

you could severely damage your computer when you

push in the connector.

Now locate the hard disk drive ribbon cable. Pull the

cable over toward the socket and fold it so the tab and

notch are aligned. Then connect it in the same manner as

the diskette drive cable.

Installing and Removing Disk Drives

B-53