Specifications

ES-300C SCANNER
Installation / Support Tips
Software
1.
When operating the EWOCIC scanner with an IBM
compatible computer, you must install the following:
o Software that supports the ES-3WC scanner or Epson’s
Epscan II scanner program.
2.
When operating the ES-3WC scanner with an Apple
Macintosh computer, you must install the following:
o S&were that supports the ES300C scanner or Epson’s
Epscan II scanner program.
Note: To achieve the best final image, you may need tc make
multiple scans at various scanner settings.
set up
if you are using the scanner with an IBM-compatible computer,
connect the interface cable to the bidirectional parallel port on
the computer. Designate the interface board on the computer
as LPT2. Some systems may require that a bidirectional parallel
port be installed.
Notez The parailel cable must be a bidirectional cable.
If you are using the scanner with a Macintosh computer, install
the SCSI interface board in the interface board slot. Then
connect the interface cable from the computer to the SCSI
connector on the scanner.
Scanners 6/30/90
ES-300G7