User Manual

ManualsBrandsEpson ManualsOffice ElectronicsEcoTank ET-2720 Wireless Color All-in-One Supertank Printer with Scanner and Copier - Black

Start Here

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online

User’s Guide.

Unpack

Note: Do not open the ink bottles until you are ready to ﬁll the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

Remove all protective materials from the product.

Note: Do not turn on the product yet.

Fill ink tanks

Warning: Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution: This product requires careful handling of ink. If ink spills,

wipe it off immediately with a damp towel to avoid permanent stains. If

ink gets on your clothes or belongings, it may not come off.

Note:

• Epson cannot guarantee the quality or reliability of non-genuine ink.

• Use the ink bottles included with the printer to set up the product.

Part of the ink will be used to charge the print head. These bottles

may print fewer pages compared with replacement ink bottles.

1 Open the ink tank cover and the cap for the black ink

tank.

Note: Refer to the color-coded sticker on the ink tank unit to

identify the color of each tank.

2 Unpack the black (BK) ink bottle. Hold the ink bottle

upright and slowly turn the bottle cap to remove it.

Caution: Do not shake or squeeze the ink bottle. Do not touch

the top of the ink bottle after its cap is removed.

3 Place the top of the ink bottle on the ﬁlling port, then

slowly stand the bottle upright to insert it, as shown.

Note: Do not force the bottles into position; they are keyed for

each color.

4 Wait for the ink to ﬁll the tank. Do not squeeze the bottle.

Note: Ink ﬂows into the tank and stops automatically when the

ink tank is ﬁlled to the upper line. If ink does not ﬂow from the

bottle, lift and reinsert the bottle.

5 When the ink tank is full, remove the ink bottle and

securely close it with the bottle cap.

Note: Do not leave the ink bottle inserted; otherwise the bottle

may be damaged or ink may leak. If any ink remains in the bottle,

store the bottle upright and top off the ink tank after completing

initial setup.

ET-2720

Summary of content (4 pages)

PAGE 1
ET-2720 2 npack the black (BK) ink bottle. Hold the ink bottle U upright and slowly turn the bottle cap to remove it. Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide. Caution: Do not shake or squeeze the ink bottle. Do not touch the top of the ink bottle after its cap is removed.
PAGE 2
6 Close the black ink tank cap. 13 Press the start button to start ink charging. Note: Ink charging takes about 10 minutes. When the power light stops flashing, ink charging is complete. Once initial setup of the printer is complete, you can top off the ink tanks with any remaining ink. See the online User’s Guide for instructions. 7 Repeat the previous steps for the other colors.
PAGE 3
4 lide the edge guides against the paper, but not too S tightly. Mobile and voice-activated printing • Print directly from your iOS device. Simply connect your printer and device to the same network and tap the action icon to select the print option. 5 Close the feeder guard. • Print directly from your Android™ (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option.
PAGE 4
Any questions? User’s Guide Windows: Click the icon on your desktop or Apps screen to access the online User’s Guide. Mac: Click the icon in Applications/Epson Software/Guide to access the online User’s Guide. If you don’t have a User’s Guide icon, go to the Epson website, as described below. Videos Visit www.epson.com/support/et2720videos (U.S.) or www.epson.ca/support/et2720videos (Canada) to view support videos. Technical support Visit www.epson.com/support/et2720 (U.S.) or www.epson.