User Manual
Table Of Contents
- Contents
- Product Basics
- Using the Control Panel
- Control Panel Buttons and Lights
- Selecting the Date and Time
- Selecting Your Country or Region
- Setting a Password and Locking the Control Panel
- Setting User Feature Restrictions (Access Control)
- Changing LCD Screen Language
- Adjusting Control Panel Sounds
- Adjusting the Screen Brightness
- Turning Off the Operation Time Out Setting
- Preventing PC Connection via USB
- Product Parts Locations
- Using Power Saving Settings
- Epson Connect Solutions for Smartphones, Tablets, and More
- Using AirPrint
- Android Printing Using the Epson Print Enabler
- Using Fire OS Printing
- Using Windows 10 Mobile Printing
- Using Epson Print and Scan App with Windows Tablets
- Using the Mopria Print Service
- Using the Control Panel
- Wi-Fi or Wired Networking
- Enabling PCL or PostScript Printing
- Loading Paper
- Placing Originals on the Product
- Copying
- Printing from a Computer
- Printing with the Standard Epson Printer Software - Windows
- Selecting Basic Print Settings - Windows
- Selecting Double-sided Printing Settings - Windows
- Selecting Additional Layout and Print Options - Windows
- Selecting a Printing Preset - Windows
- Selecting Extended Settings - Windows
- Printing Your Document or Photo - Windows
- Locking Printer Settings - Windows
- Entering a User ID and Password for Printing
- Selecting Default Print Settings - Windows
- Changing Automatic Update Options
- Printing with the Built-in Epson Driver - Windows 10 S
- Printing with the Epson Standard Printer Software - Mac
- Setting Up Printing on a Chromebook
- Printing with the PCL Printer Software - Windows
- Printing with the PostScript (PS3) Printer Software - Windows
- Printing with the PostScript (PS3) Printer Software - Mac
- Cancelling Printing Using a Product Button
- Printing with the Standard Epson Printer Software - Windows
- Scanning
- Starting a Scan
- Scanning a Document in Epson ScanSmart
- Selecting Epson ScanSmart Settings
- Scanning in Epson Scan 2
- Faxing
- Connecting a Telephone or Answering Machine
- Setting Up Fax Features
- Setting Up Contacts and Contact Groups
- Sending Faxes
- Receiving Faxes
- Checking Fax Status
- Printing Fax Reports
- Using External USB Devices with Your Product
- Refilling Ink and Replacing the Maintenance Box
- Adjusting Print Quality
- Cleaning and Transporting Your Product
- Solving Problems
- Checking for Software Updates
- Product Status Messages
- Running a Product Check
- Resetting Control Panel Defaults
- Solving Setup Problems
- Solving Network Problems
- Solving Copying Problems
- Solving Paper Problems
- Solving Problems Printing from a Computer
- Solving Page Layout and Content Problems
- Solving Print Quality Problems
- Solving Scanning Problems
- Solving Scanned Image Quality Problems
- Solving Faxing Problems
- Solving USB Device Problems
- Uninstall Your Product Software
- Where to Get Help
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Automatic Document Feeder (ADF) Specifications
- Scanning Specifications
- Fax Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- External USB Device Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Notices
299
After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another
Power Cleaning.
1. Turn off the product.
2. Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution: If you run a Power Cleaning when the ink levels are low, you may damage the product.
3. Press and hold the power button and the help button at the same time until the Power Cleaning
screen appears on the LCD screen.
4. Follow the on-screen instructions to run the Power Cleaning.
5. When the Power Cleaning is finished, run a nozzle check.
If the print quality did not improve, turn off the printer and wait at least 12 hours before running
another Power Cleaning.
If the print quality does not improve after running the Power Cleaning utility multiple times, contact
Epson for support.
Parent topic: Power Cleaning
Related tasks
Refilling the Ink Tanks
Related topics
Loading Paper
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1. If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in
one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches
[210 × 297 mm]).
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Paper Guide Cleaning.
4. Select the paper source you want to clean.
5. Follow the on-screen instructions to clean the paper guide.
6. Repeat these steps as necessary until the paper comes out clean.