Operation Manual

3. Close the cover. Repeat steps 1 to 3 for all the lms you want to scan.
4. Place the holder on the scanner glass and align it with the notch on the transparency guide, as shown below.
Non-standard lm sizes
Place the
lm
directly on the scanner glass, making sure the glossy (smooth) side of the
lm
is facing down.
If the document mat is installed in the Transparency Unit, remove it. Close the Transparency Unit.
Note:
❏ An area 17.0 ±0.5 mm from the horizontal and 2.0 ±0.5 mm from the vertical edges of the scanner glass cannot be
scanned.
❏ When you place the lm directly on the scanner glass, make sure you set the focus position to 0.0 in Epson Scan 2.
User's Guide
Using the Transparency Unit
48