saffron.
saffron.book Page ii Tuesday, January 11, 2000 2:32 PM Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners.
saffron.
saffron.book Page iv Tuesday, January 11, 2000 2:32 PM Installing the Macintosh Software Starting the Macintosh Software Installation Installing Other Software on Your Scanning Tools CD-ROM Installing Adobe Photoshop 5.
saffron.
saffron.
saffron.book Page vii Tuesday, January 11, 2000 2:32 PM Automatic Document Feeder (B813162) General Electrical Environmental IEEE 1394 FireWire Scanner Interface Card (B808342) General Environmental 135 135 135 135 135 135 135 APPENDIX B 137 INSTALLING THE TCP/IP PROTOCOL Installing the TCP/IP Protocol on Windows 95 and Windows 98 Assigning an IP Address Installing the TCP/IP Protocol on Windows NT 4.
saffron.
saffron.book Page 9 Tuesday, January 11, 2000 2:32 PM Welcome The EPSON® Expression® 1600 is a 36-bit professional graphics scanner designed to meet the needs of artists, graphics professionals, and business graphics users. It’s ideally suited for small LAN (Local Area Network) users who want to share a scanner within their workgroup. Using EPSON’s ColorTrue® II Imaging System, it reproduces images with amazingly accurate detail and color.
saffron.book Page 10 Tuesday, January 11, 2000 2:32 PM About Your Software The EPSON Expression 1600 scanner includes these leading-edge applications for professional-quality scans: EPSON TWAIN Pro Exclusive professional-quality scanner driver with powerful features for controlling every aspect of your scan. Includes Auto Area Segmentation (AAS) to separate text from background colors, and Text Enhancement Technology (TET) for more accurate OCR scanning.
saffron.book Page 11 Tuesday, January 11, 2000 2:32 PM NewSoft ™ Presto! ™ PageManager for EPSON After you’ve scanned your paper documents, use this leading document management software to organize, file, edit, copy, fax, and e-mail them from one convenient screen. (Not included with the Special Edition model.) MonacoEZcolor™ 1.5 Simplify the process of color management by creating customized color profiles for your scanner, monitor, and printer with this easy-to-use ICC profiling tool.
saffron.book Page 12 Tuesday, January 11, 2000 2:32 PM ■ Electronic Documents Several of the applications that came with your scanner include electronic manuals in the Adobe Acrobat® PDF format. You’ll find electronic user’s guides in the Manuals folder on the EPSON Expression 1600 Scanning Tools CD-ROM, as well as in the product folders. The Adobe Photoshop 5.0 LE CD-ROM also includes an electronic user’s guide, as does the MonacoEZcolor 1.5 CD-ROM.
saffron.book Page 13 Tuesday, January 11, 2000 2:32 PM Reading Your Reference Guide Your electronic EPSON Expression 1600 Reference Guide is on your EPSON Expression 1600 Scanning Tools CD-ROM. You can view it from the CD-ROM or copy it to your hard drive and view it from there. You must have a web browser (Netscape Navigator or Internet Explorer, versions 3.0 or later). If you install the manual to your hard drive, you can read it anytime.
saffron.book Page 14 Tuesday, January 11, 2000 2:32 PM 2. Click View Reference Guide. Your browser opens and you see this window: Click a topic to expand its contents. 3. Click topics on the left to expand the contents. Then click the subtopic you want to view.
saffron.book Page 15 Tuesday, January 11, 2000 2:32 PM Viewing Your Other Electronic Manuals To view your electronic manual for Presto! PageManager for EPSON, Xerox TextBridge Classic, or any other PDF manuals, you’ll use Adobe Acrobat Reader. If Acrobat Reader is not already installed on your computer, you can install it with the other scanner software. See the software installation instructions for your system in Chapter 2.
saffron.book Page 16 Tuesday, January 11, 2000 2:32 PM Locate your PDF manuals as follows: ■ EPSON Expression 1600 User’s Guide—You can find a PDF version of this user’s guide in the Manuals folder on your Expression 1600 Scanning Tools CD-ROM. ■ Acrobat Reader—For Windows, select Reader Guide from the Acrobat Reader Help menu. For Macintosh, select Reader Guide from the Acrobat Reader Help menu. Then browse to Help\Enu\Reader.pdf.
saffron.book Page 17 Tuesday, January 11, 2000 2:32 PM Registering Please take a minute to fill out the registration card for your EPSON Expression 1600 and mail it back to us. This enables you to receive special information on options, new products, and software upgrades. You’ll get immediate attention if you have a problem with your scanner.
saffron.
saffron.book Page 19 Tuesday, January 11, 2000 2:32 PM Setting Up Your Scanner Setting up your scanner is easy. For most installations, just follow the steps in this book in the order listed below. 1. Unpack and choose a place for your scanner. 2. Unlock the scanner. 3. Connect the scanner to your computer. 4. Power on your scanner, then power on your computer. 5. Install the scanner software. 6. View your electronic manuals.
saffron.book Page 20 Tuesday, January 11, 2000 2:32 PM Unpacking Your Scanner Remove the scanner from the box, then remove the packing material from your scanner. Save the packaging in case you need it later. Your EPSON Expression 1600 comes with these items: EPSON Expression 1600 Scanning Tools CD-ROM Adobe Photoshop 5.0 LE CD-ROM (not available with the Special Edition model of the scanner) scanner MonacoEZcolor 1.
saffron.
saffron.book Page 22 Tuesday, January 11, 2000 2:32 PM Choosing a Good Place for Your Scanner Here are some points to consider: ■ Place the scanner on a flat, stable surface. If the scanner is tilted, it can’t operate properly. ■ Make sure to place the scanner where you can easily unplug the power cord, and where your cable can reach your computer. ■ Keep the scanner away from direct sunlight and strong light sources.
saffron.book Page 23 Tuesday, January 11, 2000 2:32 PM Unlocking the Scanner Before connecting the scanner to a power source, you must release the transportation lock, located on the back of the scanner. Slide the transportation lock to the unlocked position, as shown. If you can’t slide the transportation lock easily, turn the scanner on; then, after the ERROR and READY lights start flashing, turn the scanner off and try again. Always lock the transportation lock before moving the scanner.
saffron.book Page 24 Tuesday, January 11, 2000 2:32 PM Testing Your Scanner’s Operation To make sure your scanner is working properly, it’s a good idea to turn it on before you connect it to your computer. 1. Make sure the scanner is plugged in. Then open the scanner’s document cover so you can see the operation of the lamp carriage. 2. Press the P Operate button to turn the scanner on. The READY light on the scanner’s front panel flashes, and the scanner’s carriage moves forward, then back.
saffron.book Page 25 Tuesday, January 11, 2000 2:32 PM Connecting the Scanner to Your Computer You can connect the scanner to your computer in any of these ways: ■ USB If you have a Power Macintosh or your computer is running Windows 98, you can connect the Expression 1600 with the USB cable that came with the scanner. Windows 98 must be preinstalled on your computer; it cannot be upgraded from Windows 95. There is no USB support for Windows 95 and Windows NT 4.0.
saffron.book Page 26 Tuesday, January 11, 2000 2:32 PM Connecting to a USB Interface With the USB interface, you can connect or remove your scanner without having to shut down or restart your computer. Don’t disconnect or connect the USB cable when the Expression 1600 is scanning. Windows 98 must be preinstalled on your computer, not upgraded from Windows 95. There is no USB support for Windows 95 or Windows NT 4.0. 1. Locate the USB cable that came with your scanner. 2.
saffron.book Page 27 Tuesday, January 11, 2000 2:32 PM Connecting to a SCSI Interface Before you connect the scanner, you must have an ASPI-compliant SCSI 2 interface board installed in your computer (Adaptec SCSI 2 interface boards are recommended). Some computers come with a SCSI 2 board preinstalled; check your computer documentation. Adaptec Power Domain SCSI boards for the Macintosh are not compatible with scanners.
saffron.book Page 28 Tuesday, January 11, 2000 2:32 PM 2. Squeeze the lock releases on the lock connector end of your SCSI cable, and then plug the cable into either SCSI connector on the back of the scanner. The cable is secure when both connector locks snap in. 3. Connect the pin end of the SCSI cable to the SCSI port on your computer, or to another SCSI device in the chain. Tighten the screws to secure the cable.
saffron.book Page 29 Tuesday, January 11, 2000 2:32 PM Connecting to an IEEE 1394 FireWire Interface If you have the Professional FireWire model of the Expression 1600, or if you’ve purchased the optional IEEE 1394 FireWire scanner interface card, you can connect the scanner to your Macintosh using an IEEE 1394 FireWire interface. Your Macintosh must have a built-in IEEE 1394 FireWire port or an IEEE 1394 FireWire PCI card.
saffron.book Page 30 Tuesday, January 11, 2000 2:32 PM Installing the Windows Software Before you begin installing software, make sure you recalibrate your monitor to factory specifications. Then follow the instructions for your operating system: ■ If you’re running Windows 98, continue with the next section, “Installing the Windows 98 Software.” ■ If you’re running Windows 95, go to “Installing the Windows 95 Software” on page 37. ■ If you’re running Windows NT 4.
saffron.book Page 31 Tuesday, January 11, 2000 2:32 PM You may be asked to insert your Windows CD-ROM during this procedure. Make sure you have your Windows CD-ROM available, or know where to find the Windows source files on your hard drive. If you need help locating your source files, contact your computer manufacturer. 1. Turn on your scanner first, then turn on your computer. 2. When you see the window on the right, click Next. (The wizard may also say that it has found an unknown device.) 3.
saffron.book Page 32 Tuesday, January 11, 2000 2:32 PM 5. Select Specify a location, if necessary, and browse to Epson\English\Win 98 on your CD-ROM drive. (The example to the right uses “G” as the CD-ROM drive letter. Your CD-ROM drive letter may be different.) Click OK to close the Browse window, and then click Next. 6. Follow the instructions on the screen.
saffron.book Page 33 Tuesday, January 11, 2000 2:32 PM The EPSON Screen Calibration Utility calibrates the preview image you see in your EPSON TWAIN Pro driver to match your monitor settings. You won’t need to change the screen calibration as long as you continue to use the same display. If you need to recalibrate your screen at a later time, double-click the Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window.
saffron.book Page 34 Tuesday, January 11, 2000 2:32 PM 3. Click the Add Software button to display the software selection window. A check mark appears beside applications selected for installation. If you want to deselect either Presto! PageManager or Acrobat Reader, click the application to clear the check mark. Then click OK. Don’t select either of the two network applications, EPSON TWAIN Pro Network or EPSON Scan Server.
saffron.book Page 35 Tuesday, January 11, 2000 2:32 PM Testing the Scanner’s Operation (Windows 98) Follow these steps to test scanner operation: 1. Double-click the Scanners and Cameras icon in the Windows Control Panel to open the Scanners and Cameras Properties window. 2. Make sure EPSON Expression1600 is selected, and then click the Properties button. 3. Click the Test Scanner or Camera button. If the scanner is operating properly, Device Ready appears next to Status.
saffron.book Page 36 Tuesday, January 11, 2000 2:32 PM Selecting the Expression 1600 as Your Default Scanner (Windows 98) If you have more than one scanner connected to your computer, you can set up the Expression 1600 as the default scanner. 1. Double-click the Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window. 2. Make sure EPSON Expression 1600 is selected, and click the Properties button. You see the EPSON Expression 1600 Properties window.
saffron.book Page 37 Tuesday, January 11, 2000 2:32 PM 3. Click the Utility tab. Make sure Select as default scanner for EPSON TWAIN Pro is checked, and then click OK. Installing the Windows 95 Software Before you begin, make sure the Expression 1600 is connected to your computer. Also, make sure you’ve recalibrated your monitor to factory specifications. If you’re configuring your SCSI interface card for the first time, you’ll be asked to install your SCSI driver at the beginning of installation.
saffron.book Page 38 Tuesday, January 11, 2000 2:32 PM 1. Turn on your scanner first; then turn on your computer. When you see the window on the right, click Next. 2. Insert your Expression 1600 Scanning Tools CD-ROM in your drive. Then click Other Locations. 3. Browse to the following location on your CD-ROM drive: EPSON\English\Win95. (The example on the right uses “E” as the CD-ROM drive letter. Your CD-ROM drive may have a different letter.) Click OK.
saffron.book Page 39 Tuesday, January 11, 2000 2:32 PM 4. When you see this window, click Finish. Continue with the instructions in the next section to install EPSON TWAIN Pro and other software on your Expression 1600 Scanning Tools CD-ROM. Installing Other Software on Your Scanning Tools CD-ROM Follow these steps to install EPSON TWAIN Pro, Presto! PageManager, and Acrobat Reader: 1. Double-click the My Computer icon on your Windows desktop, then double-click the Epson CD-ROM icon.
saffron.book Page 40 Tuesday, January 11, 2000 2:32 PM 3. Click Add Software. You see the software selection window. A check mark appears beside applications selected for installation. You must install EPSON TWAIN Pro to use your scanner. If you want to deselect either Presto! PageManager or Acrobat Reader, click the application to clear the check mark. Then click OK. Don’t select either of the two network applications, EPSON TWAIN Pro Network or EPSON Scan Server.
saffron.book Page 41 Tuesday, January 11, 2000 2:32 PM 6. When you see the EPSON Screen Calibration Utility, move the slider right or left until the stripes match as closely as possible. Then click OK. 7. Follow the instructions on the screen to install Presto! PageManager and Acrobat Reader. If you’re done installing software, remove the EPSON Expression 1600 Scanning Tools CD-ROM and restart your computer. If you want to install TextBridge Classic, Adobe Photoshop 5.
saffron.book Page 42 Tuesday, January 11, 2000 2:32 PM Installing the Windows NT 4.0 Software This procedure installs EPSON TWAIN Pro, Presto! PageManager, and Acrobat Reader. Before you begin, make sure the scanner is attached to your computer, and that you’ve recalibrated your screen to factory specifications. If you’re configuring your SCSI interface card for the first time, you’ll be asked to install your SCSI driver at the beginning of installation.
saffron.book Page 43 Tuesday, January 11, 2000 2:32 PM 4. Click Add Software. You see the software selection window. A check mark appears beside applications selected for installation. You must install EPSON TWAIN Pro to use your scanner. If you want to deselect either Presto! PageManager or Acrobat Reader, click the application to clear the check mark. Then click OK. Don’t select either of the two network applications, EPSON TWAIN Pro Network or EPSON Scan Server.
saffron.book Page 44 Tuesday, January 11, 2000 2:32 PM 7. When you see the EPSON Screen Calibration Utility, move the slider right or left until the stripes match as closely as possible. Then click OK. 8. Follow the instructions on the screen to install Presto! PageManager for EPSON and Acrobat Reader. If you’re done installing software, remove the EPSON Expression 1600 Scanning Tools CD-ROM and restart your computer. If you want to install TextBridge Classic, Adobe Photoshop 5.
saffron.book Page 45 Tuesday, January 11, 2000 2:32 PM Installing Additional Windows Software Follow the instructions in this section to install TextBridge Classic, Adobe Photoshop 5.0 LE, and MonacoEZcolor. TextBridge Classic, Adobe Photoshop 5.0 LE, and MonacoEZcolor are not included with the Special Edition model of the scanner. Installing TextBridge Classic 1. If necessary, insert the EPSON Expression 1600 Scanning Tools CD-ROM in your drive. You see the window on the right.
saffron.book Page 46 Tuesday, January 11, 2000 2:32 PM 5. At the first screen, click English-US, then follow the instructions on the screen to install TextBridge Classic. When installation is complete, remove the EPSON Expression 1600 Scanning Tools CD-ROM. If you’re done installing software, restart your computer. Installing Adobe Photoshop 5.0 LE To find out how to upgrade to the full version of Adobe Photoshop 5.0, see the Acrobat file titled Upgrade.pdf on the Adobe Photoshop 5.
saffron.book Page 47 Tuesday, January 11, 2000 2:32 PM Installing the Macintosh Software Although you can connect the scanner either before or after installing the scanner software, you’ll see a message that your scanner driver needs to be installed if you connect it before installing. Close the message and continue with the installation instructions in the next section. For instructions on installing software for a network scanner, go to Chapter 4, “Network Scanning.
saffron.book Page 48 Tuesday, January 11, 2000 2:32 PM 3. Double-click the EPSON TWAIN Pro folder, then double-click the English folder. 4. Double-click the EPSON TWAIN Pro Installer icon. 5. Click Install, and then follow the instructions on the screen to install EPSON TWAIN Pro and EPSON Scanner Monitor. 6. When installation finishes, click Restart. The EPSON Screen Calibration Utility starts.
saffron.book Page 49 Tuesday, January 11, 2000 2:32 PM Installing Other Software on Your Scanning Tools CD-ROM Follow these steps to finish installing the software on your Expression 1600 Scanning Tools CD-ROM: If you have the Special Edition model, Presto! PageManager and TextBridge Classic are not included with your scanner. 1. Double-click the Presto! PageManager folder, then double-click the English folder. (If necessary, double-click the EPSON CD-ROM icon to open the CD-ROM window.) 2.
saffron.book Page 50 Tuesday, January 11, 2000 2:32 PM Installing Adobe Photoshop 5.0 LE To find out how to upgrade to the full version of Adobe Photoshop 5.0, see the Acrobat file titled Upgrade.pdf on the Adobe Photoshop 5.0 LE CD-ROM (you must have Acrobat Reader installed to view this file). If you have the Special Edition model, Adobe Photoshop 5.0 LE does not come with your scanner. 1. Insert the Adobe Photoshop 5.0 LE CD-ROM in your drive. 2. Double-click the Adobe Photoshop 5.
saffron.book Page 51 Tuesday, January 11, 2000 2:32 PM Installing MonacoEZcolor If you have the Special Edition model, MonacoEZcolor is not included with your scanner. 1. Insert the MonacoEZcolor CD-ROM in your drive. 2. Double-click the MonacoEZcolor 1.5.0 CD-ROM icon on your desktop. 3. Double-click the Monaco EZcolor 1.5.0 folder, and then double-click the MonacoEZcolor 1.5 Installer icon. 4. When you see the installer window, click Continue and follow the instructions on the screen. 5.
saffron.
saffron.book Page 53 Tuesday, January 11, 2000 2:32 PM How to Scan This section gives you an overview of the scanning process and some tips for getting the best scan. It also includes step-by-step scanning instructions. Scanning Tips Getting the best scan possible depends on several factors, including the quality of your original and the resolution you select. The better your original is, the better your scan will be.
saffron.book Page 54 Tuesday, January 11, 2000 2:32 PM Keep the following in mind when you choose a resolution: ■ The higher the resolution you select, the larger the resulting image file will be. For example, an 8.5 × 11-inch original scanned at 300 dpi can produce a 24MB file. The same original scanned at 72 dpi creates only a 1.3MB file. Large files take longer to process and print, so consider the practical limitations of your computer system and hard disk drive when selecting a resolution.
saffron.book Page 55 Tuesday, January 11, 2000 2:32 PM Batch Scanning You can use batch scanning to save time. Batch scanning allows you to scan several images at once, or the same image with several different settings. For more information, see “Making and modifying marquees” in your electronic EPSON Expression 1600 Software Reference Guide. Using the Dual Focus Mechanism The Expression 1600’s Dual Focus mechanism eliminates the Newton ring effect when you’re using the transparency unit.
saffron.book Page 56 Tuesday, January 11, 2000 2:32 PM Recommended Settings Here are some recommended settings for different types of scans. Image type Recommended application Recommended TWAIN Pro* settings Scanning resolution for printing** Photograph Photoshop 5.0 LE Image Type: 36-bit Color (HiFi)***, 24-bit Color (Std), 12-bit Gray (HiFi)***, or 8-bit Gray (Std) 300 dpi** Magazine Photoshop 5.
saffron.book Page 57 Tuesday, January 11, 2000 2:32 PM Step-by-Step Scanning Instructions This section contains step-by-step instructions for scanning an image. Although the Macintosh interface is shown, Windows steps are the same. Placing Your Original Document 1. Raise the scanner cover and place your document face down on the document table. If you’re scanning a transparency, the optional transparency unit should be installed. (See “Installing the Transparency Unit” on page 95.
saffron.book Page 58 Tuesday, January 11, 2000 2:32 PM Scanning with EPSON TWAIN Pro 1. Start your host application (for example, Adobe Photoshop 5.0 LE). 2. Select your scanner driver. (Unless you change your source, you only need to do this step once.) For example, if you’re running Windows and using Adobe Photoshop 5.0 LE as your host application, click File, Import, Select TWAIN_32 Source. In the Select Source dialog box, select EPSON TWAIN Pro(32-bit). Then click Select.
saffron.book Page 59 Tuesday, January 11, 2000 2:32 PM Film or TPU for Pos. Film as your Document Source. If you’re using the optional automatic document feeder, select Auto Document Feeder as your Document Source. 5. Click the Preview button. You see a preview of your scan in the window that opens. 6. Click the Auto Locate button to automatically define the scan area around the edges of your image.
saffron.book Page 60 Tuesday, January 11, 2000 2:32 PM 8. Click Close to close the EPSON TWAIN Pro window and return to your application. Don’t leave photographs on the document table for long periods of time; they may stick to the glass. Using the ] Start Button You can load a document in the scanner, press the ] Start button, and watch while Presto! PageManager starts and then scans, copies, faxes, or e-mails your document.
saffron.book Page 61 Tuesday, January 11, 2000 2:32 PM Setting Up the ] Start Button If you didn’t install Presto! PageManager or if you have the Special Edition model of the scanner, you need to assign an application to the ] Start button before you use it the first time. If you’re running Windows 98, whenever you press the ] Start button you’ll see a window asking you to choose which application to launch. To avoid this window, make sure that only one application is assigned to the ] Start button.
saffron.book Page 62 Tuesday, January 11, 2000 2:32 PM 3. Click the Events tab. You see the window to the right. 4. Make sure Start Button appears in the Scanner events box, then deselect any applications you don’t want to use in the Send to this application list. When you finish, a check should appear only beside the application that you want to assign to the ] Start button. 5.
saffron.book Page 63 Tuesday, January 11, 2000 2:32 PM 3. Do one of the following: ■ Choose an application in the Launch Application list. ■ Browse to another application on your hard drive. Select the application and click Open to close the Browse window. Your application’s path appears in the Launch Application box. 4. Click OK to close the EPSON Scanner Monitor window and save your setting. Whenever you press the scanner’s ] Start button, the application you assigned launches.
saffron.book Page 64 Tuesday, January 11, 2000 2:32 PM Only Presto! PageManager automatically starts EPSON TWAIN Pro. If you assign another application to the ] Start button, you must start your scanner driver manually. Setting Up Presto! PageManager for One-Touch Scanning You can set up Presto! PageManager to send your image directly to another application or utility, such as TextBridge Classic or a fax utility, or to a peripheral device such as a printer.
saffron.book Page 65 Tuesday, January 11, 2000 2:32 PM 4. Choose the Scan Mode, Scan Size, and Resolution. If you plan to use the automatic document feeder, select Enable Document Feeder. Make any other settings you want. These are the default settings that will be used whenever you press the scanner’s ] Start button. Choose settings that you can use for most of the scans you initiate with one-touch scanning. 5. Click the Start Button Settings tab. 6.
saffron.
saffron.book Page 67 Tuesday, January 11, 2000 2:32 PM Network Scanning You can use EPSON Scan Server and EPSON TWAIN Pro Network, two applications on your EPSON Expression 1600 Scanning Tools CD-ROM, to share your scanner with other users in a small workgroup. Your network must have a scanner server (the Windows computer connected to the scanner) and one or more client computers. Only one client computer at a time can connect to the scanner server and access the scanner.
saffron.book Page 68 Tuesday, January 11, 2000 2:32 PM This chapter includes the following: ■ How to install, set up and start EPSON Scan Server on the scanner server ■ How to install and start EPSON TWAIN Pro Network on client computers ■ How to begin a scan from the client computer, the scanner server, or the scanner’s ] Start button ■ How to stop a scan in progress. Setting Up the Scanner Server You can set up any Windows 95, Windows 98, or Windows NT 4.
saffron.book Page 69 Tuesday, January 11, 2000 2:32 PM If you’ve just installed a SCSI interface card, you may be asked to install a SCSI driver at the beginning of installation. Follow the instructions on the screen to install the best driver, then continue with the scanner server installation. 1. Turn on the scanner, and then turn on your computer. When you see the window on the right, click Next. 2. Insert the EPSON Expression 1600 Scanning Tools CD-ROM in your drive. 3.
saffron.book Page 70 Tuesday, January 11, 2000 2:32 PM 5. Follow the instructions on the screen to complete the driver installation. If you see a message asking for your Windows CD-ROM, insert it and click OK, or browse to the Windows source files on your hard drive. When prompted for the EPSON Scanners Driver Disk 1, reinsert your EPSON Expression 1600 Scanning Tools CD-ROM. 6. When you see the EPSON Screen Calibration Utility, move the slider right or left until the stripes match as closely as possible.
saffron.book Page 71 Tuesday, January 11, 2000 2:32 PM Finishing the Scanner Server Installation on Windows 98 Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a single-user license for Presto! PageManager, TextBridge Classic, Adobe Photoshop 5.0 LE, and MonacoEZcolor.
saffron.book Page 72 Tuesday, January 11, 2000 2:32 PM 3. Click Add Software. The software selection window appears. 4. Select EPSON Scan Server. (A check mark appears beside applications selected for installation.) Click to select other software you want to install, or deselect software that you don’t want. Then click OK. You don’t need to install EPSON TWAIN Pro Network to use the scanner connected to your computer— use EPSON TWAIN Pro instead.
saffron.book Page 73 Tuesday, January 11, 2000 2:32 PM Setting Up the Default Scanner on Windows 98 If you have more than one scanner connected to your scanner server, you can set up the Expression 1600 as the default scanner. 1. Double-click the Scanners and Cameras icon in your Windows Control Panel to open the Scanners and Cameras Properties window. 2. Select EPSON Expression 1600, if necessary, and click the Properties button. You see the EPSON Expression 1600 Properties window.
saffron.book Page 74 Tuesday, January 11, 2000 2:32 PM 3. Click the Utility tab. Make sure Select as default scanner for EPSON Scan Server is checked, and then click OK. Installing the Scanner Server Software on Windows 95 and Windows NT 4.0 Before you begin, make sure the scanner is connected to your computer. If you’ve just installed a SCSI interface board in your computer, you may be asked to install a SCSI driver at the beginning of the software installation.
saffron.book Page 75 Tuesday, January 11, 2000 2:32 PM Starting the Scanner Server Installation on Windows 95 Follow these steps to install the scanner driver and begin software installation: 1. Turn on your scanner first, then turn on your computer. When you see the window on the right, click Next. 2. Insert the EPSON Expression 1600 Scanning Tools CD-ROM in your drive and click Other Locations. 3. Browse to the following location on your CD-ROM drive: EPSON\English\Win95.
saffron.book Page 76 Tuesday, January 11, 2000 2:32 PM 4. When you see this window, click Finish. 5. Double-click the My Computer icon on your Windows desktop. 6. Double-click the Epson CD-ROM icon. You see the Select Language window. (If you don’t see this window, double-click the Cdsetup icon.) 7. Make sure that English is selected, then click OK. You see the EPSON Software Setup window. 8. Click Add Software.
saffron.book Page 77 Tuesday, January 11, 2000 2:32 PM Starting the Scanner Server Installation on Windows NT 4.0 Follow these steps to begin the scanner server installation: 1. Turn on your scanner first. Then turn on the scanner server. 2. Log onto Windows NT. Then insert your EPSON Expression 1600 Scanning Tools CD-ROM in your drive. 3. When you see the Select Language window, make sure English is selected, and then click OK.
saffron.book Page 78 Tuesday, January 11, 2000 2:32 PM Finishing the Scanner Server Installation (Windows 95 and Windows NT 4.0) Before your computer can share its scanner, you must install EPSON Scan Server. At the same time, you can install other software that came with your scanner. Your scanner comes with a single-user license for Presto! PageManager, TextBridge Classic, Adobe Photoshop 5.0 LE, and MonacoEZcolor.
saffron.book Page 79 Tuesday, January 11, 2000 2:32 PM If you’re installing EPSON TWAIN Pro Network in order to use a scanner attached to another computer, you’ll see a window that asks for the Network Scanner Address (the scanner server’s IP address). Enter the IP address for the scanner server you want to connect to. See page 84 for instructions. Then continue with step 4 below. 3. Click Test to check scanner operation.
saffron.book Page 80 Tuesday, January 11, 2000 2:32 PM 5. Follow the instructions on the screen to install EPSON Scan Server. When you see the window on the right, make sure Expression1600 is selected under Scanner Selection. Select either Icon or Dialogbox as the scanner server Startup Mode. (See “Changing the Scanner Server Start Up Mode” on page 81 for details.) 6. Click Test to test scanner operation. OK.
saffron.book Page 81 Tuesday, January 11, 2000 2:32 PM Changing the Scanner Server Start Up Mode When you installed the software, you set up the scanner server to start in either Dialog Box mode or Icon mode. In Dialog Box mode, the following dialog box appears whenever you start EPSON Scan Server. (The message Waiting for connection in the status area indicates that the scanner is waiting for a connection to a client computer.) Click here and select Taskbar Icon to switch to Icon mode.
saffron.book Page 82 Tuesday, January 11, 2000 2:32 PM Setting Up Client Computers To set up a client computer, you’ll need to know the IP address or host name of the scanner server. Also, make sure the TCP/IP protocol is installed (see Appendix B, “Installing the TCP/IP Protocol,” for instructions). The TCP/IP protocol is preinstalled on newer Macintosh systems. If you have a Macintosh, just make sure that TCP/IP is enabled in your Extensions Manager.
saffron.book Page 83 Tuesday, January 11, 2000 2:32 PM 2. Make sure English is selected and click OK. The EPSON Software Setup window appears. 3. Click Add Software. You see the software selection window. 4. Make sure EPSON TWAIN Pro Network is selected. If you want to install them, select Presto! PageManager for EPSON and Acrobat Reader. (A check mark appears beside selected applications.) Then click OK. Your license allows you to install Presto! PageManager on one computer in your network.
saffron.book Page 84 Tuesday, January 11, 2000 2:32 PM 5. Follow the instructions on the screen to continue the installation. When you see the window to the right, enter the IP address or host name of the scanner server in the Network Scanner Address box. You can only use host names if you have a WINS or DNS server on your network. 6. Click Test to test the connection. If your computer is communicating with the scanner server and the scanner is on, you see a message that the scanner is available.
saffron.book Page 85 Tuesday, January 11, 2000 2:32 PM The EPSON Screen Calibration Utility calibrates the preview image you see in your EPSON TWAIN Pro driver to match your monitor settings. You won’t need to change the screen calibration as long as you continue to use the same display. If you need to recalibrate your screen at a later time, open the EPSON Pro Network window by double-clicking the EPSON TWAIN Pro Network icon in the Control Panel.
saffron.book Page 86 Tuesday, January 11, 2000 2:32 PM You see the EPSON Screen Calibration Utility. 5. Move the slider right or left until the stripes match as closely as possible. Then click OK. The EPSON Screen Calibration Utility calibrates the preview image you see in your EPSON TWAIN Pro driver to match your monitor settings. You won’t need to change the screen calibration as long as you continue to use the same display.
saffron.book Page 87 Tuesday, January 11, 2000 2:32 PM 7. Click Test to test the connection. You see a message that the scanner is available in the Scanner Status section of the window. Click OK to save your settings. 8. Follow the instructions in “Installing Other Software on Your Scanning Tools CD-ROM” on page 49 to install these applications. 9. Follow the instructions beginning on page 50 if you want to install Adobe Photoshop 5.0 LE and MonacoEZcolor. 10.
saffron.book Page 88 Tuesday, January 11, 2000 2:32 PM Using a Network Scanner Network scanning involves the following steps: ■ The scanner server must be turned on and running EPSON Scan Server. ■ From the client computer, start EPSON TWAIN Pro Network to establish a connection to the scanner server. Only one client computer at a time can connect to the scanner server. (See “Starting EPSON TWAIN Pro Network” on page 90 for instructions.
saffron.book Page 89 Tuesday, January 11, 2000 2:32 PM Starting EPSON Scan Server EPSON Scan Server starts automatically whenever the scanner server is turned on. When EPSON Scan Server is running, you’ll see either the EPSON Scan Server dialog box, or the EPSON Scan Server icon on the Windows taskbar. If you need to start EPSON Scan Server manually, click Start, Programs, EPSON Scan Server, and then select EPSON Scan Server. You can quit EPSON Scan Server at any time.
saffron.book Page 90 Tuesday, January 11, 2000 2:32 PM Starting EPSON TWAIN Pro Network You connect to the scanner server by starting EPSON TWAIN Pro Network from the client computer. Follow these steps: 1. Start your host application. 2. Select EPSON TWAIN Pro Network as your source, or scanner driver. (You only need to do this step once.) For example, if you’re running Windows and using Presto! PageManager for EPSON as your host application, choose Select Source from the File menu.
saffron.book Page 91 Tuesday, January 11, 2000 2:32 PM Starting a Scan You can start a scan on your network scanner in several ways: ■ You can start EPSON TWAIN Pro Network on the client computer, make your scan settings, and click the Scan button on the EPSON TWAIN Pro Network main window. The scanned image is imported into your host application’s window. ■ You can press the ] Start button on the scanner to send the scanned image to the client computer that is currently connected to the scanner server.
saffron.book Page 92 Tuesday, January 11, 2000 2:32 PM Stopping a Scan in Progress You can stop a scan in progress from either the client computer or the scanner server. 92 ■ To cancel a scan from the client computer, click the Cancel button on the Progress bar. ■ To cancel from the scanner server, click the Cancel button at the bottom of the EPSON Scan Server dialog box.
saffron.book Page 93 Tuesday, January 11, 2000 2:32 PM Using Optional Equipment There are three options available for the EPSON Expression 1600: the transparency unit (B813182) the automatic document feeder (B813162), and the IEEE 1394 FireWire scanner interface card (B808342). If you have the Professional or Professional FireWire model of the EPSON Expression 1600, the transparency unit came with your scanner.
saffron.book Page 94 Tuesday, January 11, 2000 2:32 PM Unpacking the Transparency Unit Make sure that all of the following items are included in the transparency unit box. If any items are missing or damaged, contact your EPSON dealer, or contact EPSON at (562) 276-4382 (in the United States) or (905) 709-3839 (in Canada). Keep all the packing materials so you can use them for storage when you are not scanning transparencies.
saffron.book Page 95 Tuesday, January 11, 2000 2:32 PM Removing the Shipping Screw To prevent damage during shipping, a shipping screw is attached to the transparency unit to secure its lamp assembly. You must remove this screw before using the transparency unit. 1. Turn the transparency unit so the glass side faces up. 2. Use a Phillips head (cross head) screwdriver to remove the shipping screw from the hole labeled CLAMP, as shown at right. 3. Install the screw in the storage hole labeled STOCK.
saffron.book Page 96 Tuesday, January 11, 2000 2:32 PM 4. Position the slots on the transparency unit’s mounting bracket over the heads of the two mounting screws located at the back of the scanner. Slide the transparency unit forward slightly until the two holes in front of these slots are aligned with the screw holes at the back of the scanner. 5. Insert the two installation screws that came with the transparency unit into the screw holes, then tighten the screws with a coin. 6.
saffron.book Page 97 Tuesday, January 11, 2000 2:32 PM If you haven’t connected the scanner to your computer, continue with “Connecting the Scanner to Your Computer” on page 25. Then plug the scanner in and turn it on. See “Step-by-Step Scanning Instructions” on page 57 for scanning instructions. For more detail on scanning with EPSON TWAIN Pro, see your electronic EPSON Expression 1600 Software Reference Guide.
saffron.book Page 98 Tuesday, January 11, 2000 2:32 PM 4. Place the 35 mm filmstrip guide on the document table, as shown. Make sure that the upper and right edges of the guide are aligned with the ruled edges of the document table. 5. Close the TPU and begin scanning. Make sure to select TPU for Neg. Film or TPU for Pos. Film as your Document Source in EPSON TWAIN Pro. Loading 35 mm slides Follow these steps to load 35 mm slides: 1. Load slides in the 35 mm slide holder as shown.
saffron.book Page 99 Tuesday, January 11, 2000 2:32 PM Loading 4 × 5-inch film Follow these steps to load 4 × 5-inch film: 1. Place the 4 × 5-inch film guide on a flat surface and remove the cover from one of the film holders. 2. Insert the film in the film holder, making sure the glossy (smooth) side of the film faces down and the film emulsion layer faces up. Then close the cover. 3. Repeat steps 1 and 2 for all the film you scan. 4. Place the 4 × 5-inch film guide on the document table.
saffron.book Page 100 Tuesday, January 11, 2000 2:32 PM Loading 120-size or 220-size (medium format) film Follow these steps to load 120-size or 220-size format film: 1. Place the 120/220-size film guide on a flat surface and open the cover for one of the film holders. 2. Insert the film in the film holder, making sure the glossy (smooth) side of the film faces down, and the film emulsion layer faces up. Then close the cover. 3. Repeat steps 1 and 2 for all the film you scan. 4.
saffron.book Page 101 Tuesday, January 11, 2000 2:32 PM Scanning Reflective Documents To scan reflective documents with the transparency unit installed, insert the reflective document mat included with the transparency unit. 1. Open the transparency unit. If there’s a film guide on the document table, remove it. 2. Insert the tabs on the reflective document mat into the slots on the transparency unit and slide the mat down until the tabs are secure. 3.
saffron.book Page 102 Tuesday, January 11, 2000 2:32 PM Automatic Document Feeder The automatic document feeder (B813162) allows you to automatically load multi-page documents into your scanner. This document feeder is particularly useful for OCR (optical character recognition) scanning, or for creating an image database. You can load up to 30 pages of 8.5 × 11-inch paper in the automatic document feeder.
saffron.book Page 103 Tuesday, January 11, 2000 2:32 PM Installing the Automatic Document Feeder Don’t remove the protective foam block from the mounting hardware until you’ve finished installing the automatic document feeder. Because the automatic document feeder is heavy, you may want to have someone help you with this procedure. Follow the steps below to install the automatic document feeder on your scanner: 1. Make sure your scanner is turned off and unplug the cables. 2.
saffron.book Page 104 Tuesday, January 11, 2000 2:32 PM 5. Insert the two installation screws that came with the automatic document feeder into the screw holes, then tighten the screws with a coin. 6. Remove the protective foam block from the automatic document feeder’s mounting hardware, and then gently close the automatic document feeder. Remove the foam block after tightening the installation screws. 7. Attach the automatic document feeder’s connector to the scanner’s OPTION interface. 8.
saffron.book Page 105 Tuesday, January 11, 2000 2:32 PM Loading Paper in the Automatic Document Feeder Your automatic document feeder can load up to 30 sheets of the following paper sizes: Letter, Legal, Checks (3.3 × 5 inches), A4 (8.27 × 11.7 inches), and B5 (7.17 × 10.1 inches). Follow these steps to load paper: 1. Slide the automatic document feeder’s left edge guide all the way to the left. 2. Insert your document face up in the automatic document feeder. Feed it until it meets resistance.
saffron.book Page 106 Tuesday, January 11, 2000 2:32 PM Fixing Paper Jams If a paper jam occurs, follow these steps to clear it: jam-release lever cover 1. Open the automatic document feeder’s cover, as shown. 2. Pull forward on the jam-release lever, and slowly pull the jammed paper out of the feeder mechanism. Be careful not to tear the paper. 3. After removing the jammed paper, close the document feeder cover. Make sure the ERROR light is off and the READY light isn’t flashing.
saffron.book Page 107 Tuesday, January 11, 2000 2:32 PM Installing the Card in Your Scanner Before you begin, turn off the scanner and disconnect the power cord and any cables. 1. Remove the two screws securing the shield plate to the scanner’s optional interface slot, and then remove the plate. Put the screws in a safe place in case you want to reinstall the shield plate later. Static electricity can damage electronic components like the IEEE 1394 FireWire scanner interface card.
saffron.
saffron.book Page 109 Tuesday, January 11, 2000 2:32 PM Scanner Maintenance This section gives you basic maintenance instructions and tells you how to transport your scanner safely. Transporting the Scanner When you transport the scanner a long distance or store it for an extended time, follow the steps below to secure the carriage. 1. Make sure the transportation lock on the back of the scanner is in the UNLOCK position. 2. Locate the SCSI ID rotary switch on the back of the scanner.
saffron.book Page 110 Tuesday, January 11, 2000 2:32 PM 5. Slide the transportation lock at the back of the scanner to the LOCK position. If the carriage does not automatically return to the home position, slowly raise the front of the scanner and hold it up until the carriage comes to rest in the home position. Then slide the transportation lock to the LOCK position. If you are using a transparency unit and it is switched on, the scanner carriage will not move to the home position.
saffron.book Page 111 Tuesday, January 11, 2000 2:32 PM 2. Reinstall the transparency unit’s shipping screw in the hole marked CLAMP. Cleaning the Scanner To keep your scanner operating at its best, you should clean it periodically. Before cleaning, unplug the power cord. Use a soft cloth to clean the outer case with mild detergent dissolved in water. If the document table glass gets dirty, clean it with a soft, dry cloth.
saffron.book Page 112 Tuesday, January 11, 2000 2:32 PM Always unplug the scanner before cleaning. Never use a harsh or abrasive brush or cleaning product to clean the document table. A damaged glass surface can decrease the scanning quality. Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case. Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently damage them.
saffron.book Page 113 Tuesday, January 11, 2000 2:32 PM Solving Problems This chapter explains how to interpret the signals from your scanner indicator lights, and gives you the basics for diagnosing and solving scanner problems. It also provides instructions on how to uninstall your software and tells you how to contact EPSON and other software manufacturers. For additional troubleshooting tips, see your electronic EPSON Expression 1600 Software Reference Guide.
saffron.book Page 114 Tuesday, January 11, 2000 2:32 PM Error conditions ERROR light READY light Error type N N Command error: The scanner has received incorrect commands from your scanning software. Try rescanning the document. F O Interface error: Check that your scanner is securely connected to your computer, and then turn the scanner off and back on again. F F Fatal error: Check that the transportation lock is released, and then turn the scanner off and on again.
saffron.book Page 115 Tuesday, January 11, 2000 2:32 PM Problems and Solutions If you’re having problems, this section answers some of the most common questions. For additional software troubleshooting tips, see your electronic EPSON Expression 1600 Software Reference Guide. Setup Problems ■ If your scanner is connected to a USB hub, try connecting it directly to the computer’s USB port. ■ Check the Plug and Play option for your computer; it should be active (Windows 95 or 98 only).
saffron.book Page 116 Tuesday, January 11, 2000 2:32 PM ■ Check for IRQ conflicts with built-in options. ■ Windows users: check the System Device Manager in the Windows Control Panel. If there is an Unknown Device icon, select it and click Remove. ■ Macintosh only: if you have an IEEE 1394 FireWire interface connection, make sure the following Extensions are selected in the Extensions Manager: EPSON FW Scanner Enabler, EPSON FW Scanner Expert, and EPSON FW ScannerLib.
saffron.book Page 117 Tuesday, January 11, 2000 2:32 PM ■ Uninstall and reinstall your software. See the instructions for uninstalling software beginning on page 125. ■ Check your image source setting. Make sure you selected EPSON TWAIN Pro (or EPSON TWAIN Pro Network). ■ Run the scanner test to make sure the scanner is communicating with your computer. For Windows 98, see “Testing Your Scanner’s Operation” on page 24.
saffron.book Page 118 Tuesday, January 11, 2000 2:32 PM If you installed a ZIP drive . . . ■ Try a different cable. If you have a USB connection, be sure to use an EPSON USB cable. If you have a SCSI connection, try using an ASPI-compliant Adaptec SCSI 2 cable, and be sure to restart your computer after you change the cable. ■ If you have a SCSI connection, you can’t turn the scanner off and on again while you’re using your computer.
saffron.book Page 119 Tuesday, January 11, 2000 2:32 PM If you have more than one scanner connected to your computer, make sure the Expression 1600 is selected as your default scanner. For Macintosh, check the EPSON ScannerSelector. For Windows 98, check the Utility tab on the Expression 1600 Properties window. For Windows 95 or NT, check the EPSON TWAIN Pro window.
saffron.book Page 120 Tuesday, January 11, 2000 2:32 PM ■ Check your computer’s memory. If you’re running other software at the same time, using RAM resident programs, or have many device drivers, the computer may not have enough memory. (See your software and computer manuals.) If you’re scanning a large image or scanning at a high resolution, your computer may not have enough memory to process the image. ■ Check your software installation.
saffron.book Page 121 Tuesday, January 11, 2000 2:32 PM Your scanned image is faint or has gaps . . . ■ Check the brightness. Decrease the software or driver’s brightness setting. ■ Try adjusting the Gamma and Exposure settings in the Image Controls window. ■ Check the condition of your original. If the document is damaged, dirty, or wrinkled, these imperfections will show up in your scan. ■ Make sure the document is placed flat against the document table.
saffron.book Page 122 Tuesday, January 11, 2000 2:32 PM The edges of the document aren’t scanned . . . ■ Check the position of your document. Adjust it so that the image is within the glass area of the document table. ■ If colors are patchy or distorted at the edges of the image, the document may be too thick, or there may be outside light interfering with the scan. Your image scans at an angle . . . Check the position of your document. It may be placed at an angle on the document table.
saffron.book Page 123 Tuesday, January 11, 2000 2:32 PM A line of dots is missing from the image . . . ■ When a line of dots is missing from the scanned image on your screen, the scanner sensor has malfunctioned. Contact your EPSON dealer. ■ When a line of dots is missing from your printouts, your print head has malfunctioned. See your printer manual. ■ Use MonacoEZcolor to create color profiles for your scanner, printer and monitor.
saffron.book Page 124 Tuesday, January 11, 2000 2:32 PM ■ Select 24-bit Color De-screening as your Image Type, or select On for De-screening in the Image Type The image doesn’t scan, or you can only scan a few dots . . . ■ Make sure the document is face down on the document table. ■ If you’re using an automatic document feeder, make sure the original document is inserted face up. ■ If you’ve selected OCR as your Image Type, select None for the Black and White Option in the Image Type window.
saffron.book Page 125 Tuesday, January 11, 2000 2:32 PM Uninstalling the Expression 1600 Software If you’ve tried every other solution and your system still doesn’t recognize your scanner, try uninstalling and reinstalling the scanner driver software. Uninstalling EPSON TWAIN Pro Follow the procedure for uninstalling EPSON TWAIN Pro on your system. Windows 98 1. Double-click the Scanners and Cameras icon in the Windows Control Panel. 2. On the Devices tab, select EPSON Expression1600. 3.
saffron.book Page 126 Tuesday, January 11, 2000 2:32 PM 4. Double-click the EPSON TWAIN Pro Installer icon. 5. At the Installer window, select Remove at the top of the window, then click the Remove button. Select Remove here. Click the Remove button. 6. When you’re finished, restart your computer. Uninstalling EPSON TWAIN Pro Network Follow the procedure for uninstalling EPSON TWAIN Pro Network on your system. Windows 95, Windows 98, and Windows NT 1.
saffron.book Page 127 Tuesday, January 11, 2000 2:32 PM 5. At the Installer window, select Remove at the top of the window, then click the Remove button. Select Remove here. Click the Remove button. 6. When you’re finished, restart your computer. Uninstalling EPSON Scan Server 1. To uninstall EPSON Scan Server on your Windows system, click Start, Programs, EPSON Scan Server, and select EPSON Scan Server Uninstall. 2. When you’re finished, restart your computer.
saffron.book Page 128 Tuesday, January 11, 2000 2:32 PM Where To Get Help EPSON Technical Support EPSON provides technical assistance through electronic support services and automated telephone services 24 hours a day. The following tables list the contact information: Electronic support services Service Access World Wide Web From the Internet, you can reach EPSON’s Home Page at http://www.epson.com.
saffron.book Page 129 Tuesday, January 11, 2000 2:32 PM Before you call, please have the following information ready: ■ Product name (EPSON Expression 1600) ■ Product serial number (located on the back of scanner) ■ Computer configuration ■ Description of the problem You can purchase genuine EPSON supplies and accessories from EPSON Accessories at (800) 873-7766 (U.S. sales only), 6 AM to 6 PM, Pacific Time, Monday through Friday. In Canada, please call (800) 873-7766 for dealer referral.
saffron.
saffron.book Page 131 Tuesday, January 11, 2000 2:32 PM Specifications This appendix includes general, electrical, environmental, and interface specifications. It also includes specifications for the transparency unit, automatic document feeder, and IEEE 1394 FireWire scanner interface card. Scanner General Scanner type Flatbed, color Photoelectric device Color CCD line sensor Effective pixels 13600 × 18720 pixels at 1600 dpi, 100% scaling Optical density 3.
saffron.
saffron.book Page 133 Tuesday, January 11, 2000 2:32 PM Rated current 100 to 120 VAC: 220 to 240 VAC: 0.8 A 0.
saffron.book Page 134 Tuesday, January 11, 2000 2:32 PM Option Interface Connector Interface type For use with the optional automatic document feeder (B813162) and transparency unit (B813182) Output voltage 21.6 to 26.4 VDC 4.75 to 5.25 VDC Output current 0.6 A (24 V) 0.
saffron.book Page 135 Tuesday, January 11, 2000 2:32 PM Automatic Document Feeder (B813162) General Paper input/output Load face-up; eject face-down Paper quantity 30 pages (55 g/m2 paper, maximum total thickness under 0.
saffron.
saffron.book Page 137 Tuesday, January 11, 2000 2:32 PM Installing the TCP/IP Protocol To use your EPSON Expression 1600 as a network scanner, your client computers and scanner server must have a network interface card, a network interface card driver, and the TCP/IP protocol installed. In addition, both the client computers and the scanner server must have an IP address assigned. If you have a newer Macintosh, the TCP/IP protocol was preinstalled on your computer.
saffron.book Page 138 Tuesday, January 11, 2000 2:32 PM Installing the TCP/IP Protocol on Windows 95 and Windows 98 1. Double-click the Network icon in the Control Panel. If necessary, click the Configuration tab to display the window on the right. 2. Check that TCP/IP appears in the list of installed network components. If it appears in the list, go to “Assigning an IP Address” on page 139. If you don’t see TCP/IP in the list, continue with the next step. 3. Click the Add button.
saffron.book Page 139 Tuesday, January 11, 2000 2:32 PM Assigning an IP Address If your network is connected to the Internet, ask your Internet provider or IS department for a formal IP address. If your network is not connected to the Internet, you can use an IP address in the following ranges: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, or 192.168.0.0 to 192.168.255.255. Use a different IP address for every computer on your network.
saffron.book Page 140 Tuesday, January 11, 2000 2:32 PM Installing the TCP/IP Protocol on Windows NT 4.0 1. Double-click the Network icon in the Control Panel. If necessary, click the Protocols tab. 2. Check that TCP/IP Protocol appears in the list of network protocols. If it appears in the list, go to “Assigning an IP Address” on page 141. If you don’t see TCP/IP Protocol in the list, continue with the next step. 3. Click the Add button. You see the screen to the right. 4.
saffron.book Page 141 Tuesday, January 11, 2000 2:32 PM Assigning an IP Address If your network is connected to the Internet, ask your Internet provider or IS department for a formal IP address. If your network is not connected to the Internet, you can use an IP address in the following ranges: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, or 192.168.0.0 to 192.168.255.255. Make sure you use a different IP address for every computer on your network.
saffron.
saffron.book Page 143 Tuesday, January 11, 2000 2:32 PM Notices This chapter includes system requirements, safety instructions, your Epson America Limited Warranty, and other important information about your EPSON Expression 1600. System Requirements The minimum system requirements for Windows and Macintosh are listed below. For optimum performance, a faster processor and more memory are recommended. If you’re scanning high resolution images, you need more than the minimum available hard disk space.
saffron.book Page 144 Tuesday, January 11, 2000 2:32 PM ■ VGA color monitor with 640 × 480 resolution (a color monitor with a resolution of 800 × 600 or higher recommended) ■ 8-bit 256-color display adapter card (24-bit display adapter card with millions of colors recommended) Macintosh ■ USB: Macintosh OS 8.1 or later If you’re using Mac OS 8.1 on an iMac®, you need to install iMac Firmware Update 1.0 before installing the scanner software. This is available online from the Apple® web site.
saffron.book Page 145 Tuesday, January 11, 2000 2:32 PM Year 2000 Ready Your EPSON scanner is Year 2000 Ready. However, be sure the other parts of your computer system are also ready for the year 2000. Important Safety Instructions Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. ■ Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill liquid on the scanner.
saffron.book Page 146 Tuesday, January 11, 2000 2:32 PM ENERGY STAR Compliance As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
saffron.book Page 147 Tuesday, January 11, 2000 2:32 PM Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: EPSON AMERICA, INC.
saffron.book Page 148 Tuesday, January 11, 2000 2:32 PM FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
saffron.book Page 149 Tuesday, January 11, 2000 2:32 PM EPSON AMERICA, INC. LIMITED WARRANTY What Is Covered: Epson America, Inc. (“EPSON”) warrants to the first end user customer of the EPSON product enclosed with this limited warranty statement, that the product if purchased and used in the United States or Canada, conforms to the manufacturer’s specifications and will be free from defects in workmanship and materials for a period of one year from the date of original purchase.
saffron.
saffron.
saffron.
saffron.
saffron.
