Operation Manual

Code Situation Solutions
I-61 Your computer may not support
WSD (Web Services for Devices).
The scan to computer (WSD) feature is only available for computers
running English versions of Windows 8.1, Windows 8, Windows 7 or
Windows Vista. Make sure that the printer is correctly connected to
the computer. See the Network Guide for more details.
I-71 -
Place the originals on the scanner glass to copy in A4, 2-up Copy
layout.
I-72 - Place a disc or photo on the scanner glass for copying.
I-73 - Place a photo on the scanner glass for copying.
I-74
I-75
- Place a template sheet on which you have written a message and so
on to create a greeting card on the scanner glass.
Recovery
Mode
The printer has started in recovery
mode because the
rmware
update
failed.
Follow the steps below to try to update the rmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the product is designed to stop printing when the pad has reached its limit. Whether and how
oen
this is required varies according to the number of pages you print, the type of material that you print, and the
number of cleaning cycles that the printer performs. e need for replacement of the pad does not mean that your
printer has ceased to operate in accordance with its
specications. e
printer will advise you when the pad
requires replacing and this can only be performed by an authorised Epson Service provider. e Epson warranty
does not cover the cost of this replacement.
Related Information
& “Contacting Epson Support” on page 131
& “Removing Jammed Paper” on page 104
& “Printing Photos from a Memory Card with Handwritten Notes” on page 38
& “Copying Photos” on page 63
& “Printing Photos from a Memory Card with Handwritten Notes” on page 38
Checking the Printer Status - Windows
1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab.
Note:
❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not
added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut
icon to the taskbar.
❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
User's Guide
Solving Problems
103