Operation Manual

4. Open the cover of the rear cover.
5. Remove the jammed paper.
6.
Close the cover of the rear cover, and then insert the rear cover in the printer.
Paper Does Not Feed Correctly
Check the following if the paper jams, paper is fed at a slant, several sheets of paper are fed at a time, no paper is
fed, or paper is ejected.
Place the printer on a at surface and operate in the recommended environmental conditions.
Use paper supported by this printer.
Follow the paper handling precautions.
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Do not load more than the maximum number of sheets
specied
for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
User's Guide
Solving Problems
108