Operation Manual

❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the paper source before you reload the paper.
❏ Load and eject paper without printing to clean the paper path.
❏ Make sure the paper size and paper type settings are correct.
Related Information
& “Environmental Specications” on page 125
& “Paper Handling Precautions” on page 24
& “Available Paper and Capacities” on page 25
& “Loading Paper in the Paper Cassette” on page 27
& “Cleaning the Paper Path” on page 87
Power and Control Panel Problems
Power Does Not Turn On
❏ Hold down the P button for a little longer.
❏ Make sure the power cord is securely plugged in.
Lights Came On and then Went Out
e
printer's voltage may not match the outlet rating. Turn
o
the printer and unplug it immediately.
en
check
the label on the printer.
!
Caution:
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.
Power Does Not Turn O
Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P button.
LCD Screen Gets Dark
e
printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.
Printer Does Not Print
Check the following if the printer does not operate or prints nothing.
❏ Install the printer driver.
User's Guide
Solving Problems
109