Operation Manual

❏ Adjust the threshold settings in EPSON Scan.
❏ Home Mode
Select Black & White as the Image Type setting, click Brightness, and then adjust the threshold.
❏ Oce Mode
Select Black & White as the Image Type setting, and then adjust the threshold.
❏ Professional Mode
Select Black & White as the Image Type setting, and then adjust the threshold setting.
❏ Scan at a higher resolution.
An Image of the Reverse Side of the Original Appears in the
Scanned Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Make the appropriate document type settings on the control panel or in EPSON Scan.
❏ In Home or Oce Mode in EPSON Scan, select Image Option as the Image Adjustments setting, and then
select Text Enhancement.
Related Information
& “Scan Mode” on page 20
Moire (Cross-Hatch) Patterns Appear in the Scanned Image
❏ Place the original at a slightly dierent angle.
❏ Select Descreening in any mode other than Full Auto Mode in EPSON Scan.
❏ Change the resolution setting on the control panel or in EPSON Scan.
Related Information
& “Scan Mode” on page 20
Scanning Area or Direction Is Not Correct
❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a
symbol on the frame of the scanner glass. If the edges of the scanned image are cropped o, move the original
slightly away from the corner.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may
extend to include the dust or stains, resulting in the wrong scanning position or small images.
❏ When you place multiple originals on the scanner glass to scan them separately, but they are scanned onto a
single le, place the originals at least 20 mm (0.8 inch) apart. If the problem continues, place one original at a
time.
❏ When scanning from the control panel, set the scan area correctly.
❏ When scanning using Full Auto Mode or the thumbnail preview in EPSON Scan, move the original 4.5 mm
(0.18 inch) away from the edges of the scanner glass.
User's Guide
Solving Problems
117