Operation Manual

Placing Originals on the Scanner Glass
c
Important:
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
1. Open the document cover.
2. Remove any dust or stains on the scanner glass.
3. Place the original face-down and slide it to the corner mark.
Note:
A range of 1.5 mm from the edges of the scanner glass is not scanned.
❏ When copying photos, place the photos 5 mm apart from the edges of the scanner glass.
You can place up to two photos at the same time (depending on the size of originals). Leave 5 mm between
photos.
User's Guide
Placing Originals on the Scanner Glass
32