Service manual

Document # 720000-0000
May 2008
23
EZ LOAD PRINTER
Service
Manual
Spare parts replacement instructions
Note: Follow instructions below for disassembly of defective parts. Follow instructions in the
reverse order for reassembly.
Tool required:
REFERENCE DESCRIPTION
TOOL 1 SCREWDRIVER, SLOTTED #6
TOOL 2 SCREWDRIVER, PHILIPS #2
TOOL 3 WRENCH, 7mm
Table 15: tools required
6.1 Instruction A: Removal of the top cover
1. Remove two (2) screws as shown in Figure 19 using tool 2
Figure 19: Top cover
Use ESD protection (such as a wrist strap)
anytime a PCB is exposed