Specifications

4-12
4-12 | Printing with EPSON Drivers for Windows
Paper Configuration Settings
To access the paper configuration settings, click the
Paper Config
button in
the Advanced dialog box.
The following settings are available. They override any paper configuration
settings you may have made using the printer’s control panel (page 2-22).
PhotoEnhance4 settings
Tone Lets you choose from Normal for standard tone correction,
Hard
for high contrast,
Vivid
for more intense colors (as
defined above),
Sepia
,
Monochrome
, and
None
(no tone
adjustment).
Effect
Lets you choose from four special effects (and set the
intensity using the
Low/High
slider):
Sharpness, Soft
Focus, Canvas,
and
Parchment
.
Digital Camera
Correction
Corrects noise and other flaws common to digital camera
images.
Paper Configuration settings
Color Density
Controls the ink saturation level (for example, when you turn
off color management in your printer software).
Drying Time
per Print Head
Pass
Use when printing with non-EPSON media. You can make
the print head wait up to 5 seconds after each pass to allow
ink to dry on the page.
Paper Feed
Adjustment
Eliminates light or dark horizontal bands when printing at
high speeds (720 dpi or less).
Paper
Thickness
Eliminates vertical banding and creates a sharper image
when printing on unusually thick or thin paper.
Paper Suction Decreases the paper suction level when printing on thinner
papers (less than 12 lb), such as CAD drafting paper or
backlight film.
Cut Method Decreases the cutting blade pressure for thinner papers, to
provide a cleaner cut.
Printer Guide.book Page 12 Monday, April 22, 2002 3:02 PM