Specifications
5-12
5-12 | Maintaining and Transporting the Printer
7. Lower the ink lever to its locked position.
8. If you’re using 110 ml cartridges, close the ink compartment cover. If
you’re using 220 ml cartridges, you’ll have to leave the cover open.
Once the cartridges are installed, the printer returns to its
READY
state (or
says
LOAD PAPER
if paper isn’t loaded).
If you see the message
WRONG INK CARTRIDGE
, you may have loaded an
incorrect black ink cartridge for the black ink mode you’re currently in, or
loaded a cartridge containing the wrong type of ink for your printer
(Photographic Dye or UltraChrome). Remove any cartridges indicated by a
red
Ink Out
light on the control panel, and replace them with the correct
cartridges.
Printer Guide.book Page 12 Monday, April 22, 2002 3:02 PM