Specifications

5-26
5-26 | Maintaining and Transporting the Printer
6. If the printer is mounted on a stand, you’ll need to remove it from the
stand. First make sure the casters are locked and the two stabilizer knobs
are touching the floor.
7. Remove the two wing nuts and lock washers securing the printer to the
stand (underneath the printer). Keep them in a safe place.
8. Lift the printer using the hand grips where provided. (See the stickers
located near the rear hand grips for the correct holding position.)
9. Keep the printer level while moving it.
caster lock
stabilizer knob
Warning
The Stylus Pro 7600 weighs
about 100 lb (50 kg) and
should be lifted by two
people.
The Stylus Pro 9600 weighs
almost 200 lb (100 kg) and
should be lifted by four
people.
Stylus Pro 7600 Stylus Pro 9600
Printer Guide.book Page 26 Monday, April 22, 2002 3:02 PM