Specifications

5-27
Maintaining and Transporting the Printer | 5-27
Setting Up the Printer After Transportation
Setting up the printer after transporting it is almost identical to setting it up
for the first time (see “Setting Up the Printer” on page 1-1).
Keep in mind that the first time you start printing after moving the printer,
the print head nozzles may be clogged—especially if the printer hasn’t been
turned on for a long time. You may need to run a cleaning cycle (page 1-37)
and realign the print head (page 1-39) to ensure good print quality.
Moving the Printer on the Stand
When you need to move the printer a short distance, such as within the same
building, you can roll the printer on its casters. Follow these steps:
1. Make sure the printer is turned off and the carriage is in the home
position (on the far right). If not, turn the printer back on, wait until the
carriage moves to the home position, then turn off the printer.
2. Disconnect the power cord and interface cable.
3. Make sure the printer covers are closed.
4. Fully insert the metal rods supporting the paper basket, then roll up the
paper basket so it doesn’t drag on the ground.
Caution
Do not roll the printer
on angled or uneven
surfaces.
Printer Guide.book Page 27 Monday, April 22, 2002 3:02 PM