Specifications

6-4
6-4 | Solving Problems
SET PAPER
LEVER
Paper Out
light on
Paper lever was
released during the
printing process or
another operation.
Pull the lever all the way forward, to the
secured position. Start printing again from the
beginning for best results.
SET INK LEVER — The ink lever was left in
the unlocked position.
Pull the lever down to lock the ink cartridges.
FRONT COVER
OPEN
Pause light on Front cover is open. Close the front cover.
TURN PRINTER
PWR OFF AND
ON
— This message appears
after you clear a paper
jam.
Press the Power button to turn the printer off
and back on again.
UNABLE TO
PRINT
— You tried to print while
an error condition was
present or the ink
compartment cover
was open.
After 3 seconds the message disappears.
Press the Pause button to exit SelecType
mode. If the message appears again, clear the
error before you print.
MAINTENANCE
TANK ALMOST
FULL
Maintenance
Tank light
flashing
The maintenance tank
is almost full.
Make sure you have a replacement
maintenance tank. See page 5-22.
CHANGE
MAINTENANCE
TANK
All lights
flashing
The maintenance tank
is full.
Replace the maintenance tank. See page 5-22
for instructions.
NO
MAINTENANCE
TANK
Maintenance
Tank light is
on
The maintenance tank
is not installed.
Make sure the maintenance tank is fully
inserted. See page 5-22 for instructions.
OPTION I/F
ERROR
— Wrong interface card
installed.
Turn off the printer and remove the card. See
the documentation that came with the card.
SERVICE REQ. All lights
flashing
An error has occurred. Note the error number, then turn the printer off
and back on. If the message remains, contact
EPSON as described on page 3.
Error messages (continued)
Message Light Explanation Response
Printer Guide.book Page 4 Monday, April 22, 2002 3:02 PM