Specifications

6-5
Solving Problems | 6-5
MAINTENANCE
REQ.
— A printer part will need
to be replaced soon.
Note the error number and contact EPSON as
described on page 3. (If only the cutter blade is
worn out, you can replace it yourself. See
page 5-2 to check its status.)
COMMAND ERROR You’re using the wrong
printer driver.
Make sure you installed the correct driver for
your printer.
Damaged data was
sent to the printer.
To clear the data, press the printer’s Power
button to turn the printer off. Wait for about a
minute, then turn the printer on again.
Error messages (continued)
Message Light Explanation Response
Printer Guide.book Page 5 Monday, April 22, 2002 3:02 PM