Specifications

6-14
6-14 | Solving Problems
•
Make sure the printer isn’t located in a brightly lit area. The paper
sensors may not operate correctly.
•
Make sure the
Media Type
and
Paper Source
settings in the printer
software are correct.
•
Make sure the platen gap setting is correct for the paper or media you’re
printing on. See page 2-19 for more information.
•
If you’re not using EPSON media, make sure you profile the paper to
adjust its thickness and drying time (see page 2-23).
Solving Roll Paper Feeding Problems
If your roll paper is curled too tightly and doesn’t feed out of the printer, you
can use the paper guides shown below to help it feed straight (two on the
Stylus Pro 7600 and three on the 9600).
Caution
Use the paper guides only
if paper is curled and
doesn’t feed properly.
Otherwise, the paper
guides may mar
your prints.
Printer Guide.book Page 14 Monday, April 22, 2002 3:02 PM