Specifications

2-23
Handling Paper and Other Media | 2-23
4. Use the
u
and
d
buttons to make any necessary changes, then press
Enter
to save your new setting.
5. To adjust another setting, press the
l
button to return to the menu
options.
6. When done, press
Pause
to exit the menu.
Creating and Selecting Paper Profiles
To create a profile for a specific paper type, make sure the paper you want to
profile is loaded in the printer. Then follow these steps:
1. Press the
SelecType
button, then press the
d
button until
PAPER
CONFIG
appears on the display.
2. Press the
r
button so that
PAPER NUMBER
appears.
3. Press the
r
button.
4. Use the
u
and
d
buttons to assign a paper profile number (1 to 10),
then press
Enter
.
5. Press
Enter
again to print the paper thickness pattern.
The printer prints a pattern similar to the following:
DRYING TIME Use when printing with non-EPSON media. You
can make the print head wait up to 5 seconds after
each pass to allow ink to dry on the page.
SUCTION
Lets you decrease the paper suction level when
printing on thinner papers (less than 12 lb), such
as CAD drafting paper or backlight film.
PRINT ADJ
Adjusts the intensity of the MicroWeave
®
pattern.
Improves print quality but lowers printing speed.
Menu option Function
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Printer Guide.book Page 23 Monday, April 22, 2002 3:02 PM