Specifications

3-3
Printing with EPSON Drivers for Macintosh | 3-3
3. Select the type of paper you loaded (
Roll Paper
or
Sheet
) from the
Paper Source
list.
If your image is more than 90.5 inches long, select
Roll Paper
(Banner)
. You can also use this setting to print a series of continuous
images without any “margin space” between them.
4. If you’re using roll paper, you can set the following options:
• Auto Rotate
Saves paper if your document length is shorter than the printable
width of the paper roll. Your image is rotated automatically by
90 degrees and printed crosswise.
• Auto Cut
Choose this option if you want the paper to be cut automatically
after each page is printed (not available for thicker media types).
• Print Page Line
Prints trim lines on the right and bottom edges of your pages.
• Save Roll Paper
Saves paper by not feeding the blank portion of the last page of your
document. Available only when you’ve selected
Roll Paper
(Banner)
as the Paper Source.
5. Make the settings you want for
Orientation
,
Reduce or Enlarge
, and
Printable Area
(available when
Paper Source
is set to
Sheet
).
6. After making your settings, click
OK
.
Printing Without Margins
You can select BorderFree
™
printing when printing on paper with the
following widths:
•
8 to 8.5 inches
•
20 inches
•
10 inches
•
24 inches
•
12 inches
•
36 inches (Stylus Pro 9600 only)
•
14 inches
•
44 inches (Stylus Pro 9600 only)
•
16 inches
Note
Don’t select Landscape
unless you want to rotate
your image 90°.
Note
These settings override
settings made through
the control panel.
Note
For best print quality
along the upper edge of
your printout, EPSON
recommends using one
of the following papers:
•
Premium Glossy
Photo Paper (250)
•
Premium Semimatte
Photo Paper (250)
•
Premium Luster
Photo Paper
Note that you can’t print
without borders when
using Photographic Dye
ink at 2880 dpi.
Printer Guide.book Page 3 Monday, April 22, 2002 3:02 PM