User's Manual

Loading Envelopes
You can load envelopes one at a time using the paper guide
on the top of the printer, or you can load multiple envelopes
using the optional high-capacity cut-sheet feeder (bin 1 of the
double-bin cut-sheet feeder).
Before loading envelopes, set the paper thickness lever to a
position from 2 (for thin envelopes) to 6 (for thick envelopes).
To load single envelopes, follow the instructions in “Loading
paper in the paper guide” on page 4-4. To load multiple
envelopes, see “Loading paper in the high-capacity cut-sheet
feeder” on page A-10.
Note:
o
As shown above, place the envelope printable side down and insert
the top edge of the envelope into the printer first.
o
The print head must not print past the left or right edge of the
envelope or other thick paper. Make sure your application
program prints entirely within the printable area of your
envelope. See Appendix C for more information on the printable
area of envelopes.
o
If you are using No. 6 envelopes, make sure the left edge guide is
aligned with the arrow on the paper guide.
G4-21
L
Gentian-W Rev.C
A5 size Chapter 4
11/17/97 pass 1
4-6 Printing on Single Sheets