User Setup Information

Attach the paper guide. Then set the
paper release lever to the rear push
tractor position.
Make sure that the paper guide is lying
flat on the printer and the edge guides
are open all the way to the left and
right. Then raise the continuous paper
support.
c
Caution:
Never use the knob to adjust the
top-of-form position; this may damage the
printer or cause it to lose the top-of-form
position.
Loading Continuous Paper With the Rear Push Tractor
5
3
If the first line of your page appears too
high or too low, use the micro adjust
feature to change its position.
4