User's Manual

5. Pull the paper bail lever forward. This makes the paper feed into the
printer.
6. When the paper stops, push the paper bail lever back.
7. Hold the printer cover vertically and fit the notches in its front
corners over the pins at the front of the printer case (as shown in
Figure 2-4). Then tilt the cover back into place.
Figure 2-4.
Installing the printer cover
When you have learned this procedure, you’ll probably leave the
cover on when you load single-sheet paper. If you wish, you can raise
the cover to the vertical position while you’re loading the paper. The
two icons (small pictures) on the printer cover will help you remember
the correct positions of the levers.
Now you are ready to print on single-sheet paper.
Choosing and Loading Paper
2-5