Product Support Bulletin Subject: Power Specifications Date: 2/7/90 Page: 1 of 2 PSB No: P-0060 Originator: RFB The following information is a list of the power requirements for the Epson 9 and 24 pin printers and laser printers.
PSB No: P-0060 Page: 2 of 2 Product Max. Current 1 Voltage 1 Consumption 1 Power Consumption 1 BTU/HR LX810 1 120V .7 Amp 84 VA maximum T750 120V 1.0 Amp 120 VA maximum 409.56 T1000 120V .7 Amp 84 VA maximum 286.69 I 286.69 If the power requirements of a particular Epson printer is not listed please refer to the appropriate User's Manual for the electrical specifications. In the event that the User's Manual is not available, locate the silver label on the back of the Epson printer.
EPSON EPSON AMERICA, INC. INFORMA Product Support Bulletin Subject: Tractor Pin Alignment Date: 5/15/89 Page: 1 of 1 PSB No: P - 0044 Originator: RP bd The purpose of this bulletin is to insure the proper installation and alignment of the FX-850/1050 and LQ- 850/1050 push tractor assemblies. There are two possible ways to install the tractor frame on the push tractor assembly.
EPSON EPSON AMERICA, INC. SERVICE PRODUCT SUPPORT BULLETIN PSB NO.: P-0024 SUBJECT: FX-850/1050 I DATE: 8/01/88 UNDOCUMENTED PAGE: BUFFER 1 of 1 FEATURE The FX-850/1050 dot matrix printers support an important feature that is currently undocumented in the printer's User's manual. The FX-850/1050 printers have the ability to enable or disable the input buffer.
EPSON EPSON AMERICA, INC.
PSB No: P-0017B Page: 2 of 2 24 - PIN MATRIX OPTIONS LQ-510 LQ-850 LQ-950 LQ-1050 LQ-2550 C800061 7311 -A 7313-A 7312-A 7314-A C806121 N/A 7339-A 7346-A 7345-A 7347-A 7340-A 7348-A N/A 7343-A 7753 N/A 7768 7767 N/A 7769 7754 N/A 7762 7763 7764 8143 8148 8172 8185 8143 8148 8172 8165 8143 8148 8172 8165 8143 8148 8172 8165 C1-9E-A C1-9E-A C1-9E-A C1-9E-A E-i N/A N/A N/A N/A E-X z:; =I; iz 8239 zi 8239 N/A N/A N/A N/A TRACTOR UNITS PULL TRACTOR CUT SHEET FEEDERS SINGLE BIN DO
EPSON EPSON AMERICA, INC. Product Support Bulletin Subject: Quick Reference for Printer Acoustic Noise Levels PSB No: P-0016D Originator: SLS Date: 6/5/91 Page(s): 1 of 2 Sound intensity is measured in units called Bels (named after Alexander Graham Bell,) or more commonly in tenths of this fundamental unit: decibels. In making noise measurements a weighting network is applied in an attempt to match the frequency response of the instrument to that of the human ear.
PSB No: P-0016D Page: 2 of 2 MODEL NOISE LEVEL LQ-860 55 dB(A) LQ-1050 55 dB(A) LQ-2550 55 dB(A) LASER PRINTERS