User's Manual

3. To change settings in default-setting mode 1, hold down the
Tear Off/Bin
button while you press the
Operate
button to
turn on the printer. To change settings in default-setting
mode 2, hold down the
Tear Off/Bin
and
LF/FF
buttons
while you press the
Operate
button to turn on the printer.
The printer enters the default-setting mode you selected and
prints the language selection instructions (one page).
4. Press the
Load/Eject
button until the
Paper Out
and
Pause
lights indicate the language you want, as described in the
language selection instructions.
5. Press the
Tear Off/Bin
button to print the default-setting
mode instructions (two pages) in the language you selected.
The printed instructions list the settings you can change,
describe how to change them, and show you how the
control panel lights help you make settings. Use these
instructions to change the printer’s default settings from the
control panel.
Note:
The arrows in the instructions indicate the printer’s current settings.
6. When you finish making settings, press the
Operate
button
to turn off the printer and exit the default-setting mode.
Note:
You may exit the default-setting mode by turning off the printer at any
time that it is not printing. Any settings you have made remain in effect
until you change them again.
L
Gentian-W Rev.C
A5 size Chapter 5
11/14/97 pass 0
5-10 Changing Printer Settings From the Printer’s Control Panel