User's Manual

6. Insert the paper into the front or bottom paper slot as
described below until it emerges between the platen and
the ribbon guide. Then pull up the paper until the
perforation between the first and second pages is even with
the top of the printer’s ribbon.
7. Fit four holes of the paper over the tractor pins on both
sprockets. Then close the sprocket covers.
Before you load paper in the
front slot, remove the front
cover. Then load paper
printable side up.
G3-19-1
Load paper in the bottom
slot printable side up.
G3-19-2
G3-19-4
3
R
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
Printing on Continuous Paper 3-25