User's Manual

13. When the printer receives data, it will start printing at the
current position without advancing the paper. If necessary,
follow the steps in “Adjusting the Top-of-Form Position” on
page 3-35 to adjust the current position of the paper.
c
Caution:
Never use the knob to adjust the top-of-form position; this
may damage the printer or cause it to lose the top-of-form
position.
14. Attach the printer cover by inserting the front tabs into the
slots on the printer, then lowering the cover into place.
15. Send a print job to the printer. The printer starts printing
from the top-of-form position. After you finish printing,
tear off the printed document at the perforation nearest the
paper exit slot.
fx05
3
R
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
Printing on Continuous Paper 3-27