PowerLite G5000 Multimedia Projector ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . . 8 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1 2 Setting Up the Projector . . . . . . . . . . . . . . . . . . . . .
Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Adjusting the Position of the Image . . . . . . . . . . . . . . . . 31 Focusing and Zooming the Image . . . . . . . . . . . . . . . . . 32 Adjusting the Image Shape. . . . . . . . . . . . . . . . . . . . . . . 33 Selecting the Color Mode . . . . . . . . . . . . . . . . . . . . . . . 35 Resizing Video Images . . . . . . . . . . . . . . . . . . . . . . . . . . 36 3 4 4 Presenting With the Remote Control . . . . . . . .
Multi-screen Color Adjustment . . . . . . . . . . . . . . . . . . . . . . 61 Projector Menu and Options List . . . . . . . . . . . . . . . . . . . . . 62 5 Managing Projectors . . . . . . . . . . . . . . . . . . . . . . . . . 65 Connecting to a Wired Network . . . . . . . . . . . . . . . . . . . . . 65 Using Projector E-mail Alerts . . . . . . . . . . . . . . . . . . . . . . . . 67 6 Maintaining the Projector . . . . . . . . . . . . . . . . . . . 69 7 Solving Problems A Cleaning the Lens . . . . . .
B Technical Specifications . . . . . . . . . . . . . . . . . . . . . 99 C Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 105 FCC Compliance Statement. . . . . . . . . . . . . . . . . . . . . . . . 108 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Welcome The PowerLite ® G5000 is an easy-to-use, flexible for installation projector. It offers up to 4000 lumens of brightness (white and color light output) and provides a native XGA resolution. You can connect it to a wide range of computers and video sources.
Using Your Documentation This electronic User’s Guide contains all the information you need to set up and use your projector. In addition, your projector CD-ROM includes the EMP Monitor Operation Guide. Refer to this manual for detailed instructions on monitoring the projector from a remote location. Please follow these guidelines as you read through this manual: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment.
Registration and Warranty Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty brochure included with your projector. In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada, usually via next business day delivery.
Optional Accessories To enhance your use of the projector, Epson offers the following optional accessories: Product Part number Replacement lamp for PowerLite G5000 V13H010L47 Replacement air filter V13H134A17 Wireless IR mouse receiver for remote control V12H007T16 Replacement remote control 1485872 Advanced projector ceiling mount with precision gear Adjustable suspended ceiling channel kit False ceiling plate kit Structural round ceiling plate Adjustable extension column (pipe) 8”–11” ELPMBPRG
1 Setting Up the Projector T his chapter tells you how to unpack the projector and connect it to a notebook or desktop computer, to video equipment (such as a VCR, DVD player, or video camera), and to a local area network.
Unpacking the Projector After unpacking the projector, make sure you have all these parts: PDF manuals and registration CD-ROM Projector software CD-ROM Projector and lens cap Lens theft deterrent screw Power cord Remote control and 2 AA batteries Password Protected sticker VGA computer cable Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location.
Positioning the Projector note If the projector isn’t already installed in the room you’re using, you’ll probably want to place it on a table in front of the screen. This lets you stand in the front of the room, face the audience, and remain close enough to the equipment to be able to control it. Try to leave as much space as possible between the projector and the screen to get a good-size image. You can mount the projector on the ceiling, or place it behind a translucent screen for rear projection.
note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector. You can purchase this from Epson; see page 10. Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The base of the lens should be about level with the bottom of the screen.
Connecting to a Computer You can connect the projector to any computer that has a standard video output (monitor) port, including desktop models, PC notebook computers, MacBook®, PowerBook®, and iBook® computers, and hand-held devices. If you have the optional wireless mouse receiver, you can use your remote control as a wireless mouse when projecting from a computer (page 42).
Connecting to Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a component video port (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a Component Video Source” on page 19.
Connecting a Composite Video Source 1. If your video cable has an RCA connector, connect it to the yellow video output connector on your player and the yellow Video2 connector on the projector (as shown below). Or if you’re using a coax video cable, connect it to the Video1 connector on the projector. note If the video cable was not provided with your video device, you can purchase one from an electronics dealer. 2.
Connecting an S-Video Source note If the S-video cable was not provided with your video device, you can purchase one from Epson; see page 10. 1. Connect the S-video cable to the S-video connector on your player and the S-Video connector on the projector. 2. To play sound, you can connect an optional stereo mini-jack audio cable and optional external speakers (see page 21). 3.
Connecting a Component Video Source You will need a special cable to connect your component video equipment to the VGA-style connector on the projector. You can order a component-to-VGA cable (part number ELPKC19) from Epson; see page 10 for more information. 1. Locate a component-to-VGA cable. 2. Connect the cable to your player and the Computer 1 or Computer 2 connector on the projector. note Be sure your video player is not an RGB video source. If you select the wrong source, image quality may suffer.
Connecting an RGB Video Source note Be sure your video player is not a component video source. If you select the wrong source, image quality may suffer. Check your video player’s documentation. 1. Locate the VGA computer cable provided with the projector (or if your video player has three connectors labeled R/G/B, locate a component-to-VGA cable as shown on page 19). 2. Connect the cable to the video port(s) on your player and the Computer1 or Computer2 port on the projector. 3.
Playing Sound You can play sound by connecting external speakers with built-in amplifiers. You can use the remote control or the projector’s menu system to adjust the volume. Follow these steps to connect your equipment and external speakers to the projector: 1. Locate the appropriate cable and connect it to the audio port(s) on the projector. ■ If you have equipment connected to the Computer1 or Computer2 ports, use a stereo mini-jack cable. Connect the cable to the Audio port beneath the Computer2 port.
2. Connect the other end of the cable to the audio output connector(s) on your computer or video equipment. 3. Locate the appropriate cable to connect your speakers. Depending on your speakers, you may be able to use a commercially available audio cable with a stereo mini-jack connector on one end and pin jacks on the other end. For some speakers, you may have to purchase a special cable or use an adapter. 4. Connect the stereo mini-jack end of the audio cable to the Audio Out port on the projector. 5.
Connecting a Network Cable To connect the projector to your local area network (LAN), use a commercially available 100BaseTX or 10BaseT network cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
Turning the Projector On and Off Turn on any connected computer or video equipment before starting the projector so it can automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 28). Follow these steps to turn on the projector: 1. Remove the lens cover.
3. Press the Ppower button on the remote control or on the back of the projector. Power button The projector beeps once and the Ppower light flashes green as the projector warms up, then an image begins to appear. When the Ppower light stops flashing and remains green, the projector is ready for use. 4. If you are prompted to enter a password, see page 55. warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children.
Shutting Down the Projector note Lamp life results depend upon the Brightness Control setting you’ve selected, environmental conditions, and usage. Turn off this product when not in use to prolong the life of the projector. This projector incorporates Instant Off technology. To turn it off, you can press its Ppower button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don’t have to wait for the projector to cool down first. 1.
2 Displaying and Adjusting the Image Follow the guidelines in this chapter for: ■ Displaying an image ■ Troubleshooting display problems ■ Adjusting the image 27
Displaying an Image note The BNC, EasyMP, and HDMI buttons are not applicable to this projector. You may need to select the image source if you have multiple video sources connected to the projector (such as a computer or DVD player). Selecting the image source lets you switch between images input from different pieces of connected equipment.
■ If you’ve connected more than one computer and/or video source, you may need to press the Source Search button on the projector’s control panel, or the Search button or one of the Source buttons on the remote control to select the correct source. (Allow a few seconds for the projector to sync up after pressing the button.) ■ If you’re using a PC notebook, press the function key on your keyboard that lets you display on an external monitor. It may be .
If you’re using Mac OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple® menu, select System Preferences. 2. Select Displays, then click Detect Displays. 3. Make sure the VGA Display or Color LCD dialog box is selected. 4. Click the Arrangement or Arrange tab. Make sure Mirror Displays is checked 5. Make sure the Mirror Displays checkbox is selected.
Adjusting the Position of the Image If the image is too low on the screen, you can use the front adjustable foot to raise it. 1. Stand behind the projector. Press the foot release lever up and lift the front of the projector. 2. Once the image is positioned where you want it, release the lever to lock the foot in position. 3. If necessary, you can fine-tune the height or level the image by turning any of the projector’s adjustable feet.
Additionally, you can use the vertical lens shift dial on the top of the projector to move your image up or down, or you can use the horizontal lens shift dial to move your image left or right. Vertical Horizontal Focusing and Zooming the Image Turn the focus ring on the projector to sharpen the image. Turn the zoom ring (using the knobs on the ring) to reduce or enlarge the image. Focus Zoom If the image still isn’t large enough, you may need to move the projector farther away from the screen.
Adjusting the Image Shape You can maintain a square or rectangular image by placing the projector directly in front of the screen and keeping it level. This also produces the best picture quality. If the projector is tilted up or placed at an angle, you’ll need to correct the image shape by using one of the functions described below. Using Quick Corner Use Quick Corner to adjust the shape and size of the image when it’s uneven on all sides. Follow these steps to select Quick Corner: 1.
Using Keystone Correction You can manually adjust the shape of the image to compensate for vertical and horizontal keystone distortion. First make sure the Keystone setting in the projector’s menu system is set to H-Keystone or V-Keystone: 1. Press the Menu button on the remote control or projector. 2. Select the Settings menu and press Enter. 3. From the Settings menu, select Keystone and press Enter. 4. Select H/V-Keystone and press Enter.
Selecting the Color Mode The Color Mode adjusts the brightness, contrast, and color for various common viewing environments. Use this setting to quickly obtain a good picture. Press the Color Mode button on the remote control, and then select from one of these options: ■ Presentation: For making color presentations in a bright room. ■ Text: For making black-and-white presentations in a bright room. ■ Theatre: For watching movies in a darkened room; gives images a natural tone.
Resizing Video Images You can use the Aspect button on the remote control to change the aspect (width to height) ratio, depending on the input signal. ■ Normal (for images sent through the Computer1 or Computer2 ports only): Displays images using the full projection area and maintains the aspect ratio of the image. Choose this setting to automatically resize the image and make the best use of the display area. ■ 4:3: Displays images using the full projection area at an aspect ratio of 4:3.
3 Presenting With the Remote Control T he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 49 feet (15 meters) away. You can use the remote control to adjust the picture and sound (page 38), as a pointer to highlight your presentation (page 41), or to control two or more projectors at the same time (page 43).
note If a button is pressed longer than 30 seconds, the remote control stops operating to conserve battery power. When you release the button, normal operation resumes. Using the Remote Control Make sure batteries are installed as described on page 78. Follow these tips for using the remote control: ■ Point the remote control at the front of the projector or at the screen. ■ Stand within 49 feet (15 meters) of the projector.
Turning Off the Picture and Sound You can temporarily turn off the image and sound by pressing the A/V Mute button on the remote control. This turns the image black and stops the sound. To turn the image and sound back on, press the button again. note In order to play sound with this projector, you must connect optional external speakers (see page 21).
Zooming Part of Your Image You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. 1. Press the E-Zoom button on the remote control. You see a crosshair indicating the center of the zoom-in area. 2. Use the pointer button to position the crosshair. button to enlarge the selected 3. Continue pressing the E-Zoom area up to 4 times. 4.
Highlighting Your Presentation You can display a pointer to call out important information on the screen, and you can choose from three shapes for the pointer. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer button on the remote control. A pointer appears on the screen. Pointer If you prefer to use a different style of pointer, see the instructions in the next section. 2. Use the pointer button on the remote control to position the pointer on the screen. 3.
Operating Your Computer With the Remote Control With the optional wireless mouse receiver (see page 10), you can use the remote control in place of your computer’s mouse. This gives you more flexibility when delivering slideshow-style presentations, since you won’t have to stand next to the computer to change slides. ■ Use the Up and Down buttons to move through a ® Microsoft PowerPoint slideshow.
Operating Two or More Projectors With the Remote Control If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system. To operate a projector, set the remote control’s ID to match that of the projector. Or you can control all the projectors at once by setting the remote control’s ID to zero. Setting the Projector ID The projector’s default ID is set to Off. This lets it respond to commands from any remote control.
Checking the Projector ID You can check the projector’s ID by following these steps: 1. Point the remote control at the projector you want to check. 2. While holding the ID button, press the Help button. You see a message on the screen like this: Setting the Remote Control ID note If you’re using a remote control ID other than the default ID of zero, you have to set the ID each time you turn on the projector. The remote control’s default ID is zero. This lets you operate any projector.
4 Fine-Tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features.
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu screen similar to the one below: Options Menu list The menus are listed on the left and the options available for the highlighted menu are shown on the right. note For a complete list of menus and options, see page 62.
4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the Enter button to view a sub-screen for changing the setting. ■ Press the left or right side of the a slider bar. pointer button to adjust ■ To select from two or more settings, use the pointer button to highlight the desired setting and press Enter. 5.
Adjusting the Image You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. 1. Press the Menu button on the projector or remote control and select the Image menu. You see a screen similar to one of those below. (The settings will be different depending on the source you are projecting from.) Computer/RGB Video note The available settings vary depending on the input source selected. Component Video/ Composite Video/ S-Video 2.
■ Sharpness Adjusts the sharpness of the image. ■ Abs. Color Temp. Sets a color temperature between 5000 and 10000 °K. (Not available if sRGB is selected as the Color Mode setting.) ■ Color Adjustment Adjusts the color values. For Customized color mode, select R, G, B, C, M, Y to adjust individual red, green, blue, cyan, magenta, and yellow hue, saturation, and brightness values. For other color modes, RGB may be selected to adjust red, green, and blue saturation values.
You may need to readjust the color as the lamp in your projector changes over time. Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio to widescreen format for video images. 1. Press the Menu button and select the Signal menu.
■ Tracking note Adjust this value to eliminate vertical stripes in computer images. ■ Sync Adjust this value if computer images appear blurry or flicker. ■ Position You can also use the remote control’s Auto button to automatically reset the projector’s Tracking, Sync, and Position settings. See page 89 for details. If the image is slightly cut off on one or more sides, it may not be centered exactly. Select this setting and use the pointer button to center it.
■ Video Signal Select the setting for the type of equipment you’ve connected to the Video1 or Video2 ports. Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60). ■ Aspect Sets the image’s aspect ratio (ratio of width to height). Depending on your projector model and input source, you can select Normal, 4:3, 16:9, or Through; see page 36 for more information.
■ Control Panel Lock Lets you disable all of the buttons on the projector, or all of the buttons except the Ppower button. See page 58 for more information. ■ Pointer Shape Lets you choose from three pointer shapes. See page 41 for more information. ■ Brightness Control Lets you select from two levels of brightness. The Low setting reduces power consumption and noise, and extends the lamp’s operating life. ■ note Volume You can also adjust the volume using the remote control.
Using the Projector Security Features note To prevent theft, you can also attach a security cable or Kensington security lock to the projector, and use the lens theft deterrent screw (see page 96). caution If you lose the remote control, you will not be able to enter the password. Keep the remote control in a safe place at all times. Also, it’s a good idea to write down your password. To prevent unauthorized use of the projector, you can do the following: ■ Assign a password.
4. Hold down the Num button on the remote control and use the numeric keypad to enter a four digit password. (The default setting is 0000.) 5. When you see a confirmation message, reenter the password. Then press the Menu button to exit the screen. To set security options, access the Password Protect screen as described on page 54, and then turn on any of the following options: ■ Power On Protect to prevent unauthorized use of the projector.
If the password is not correct, you see a message prompting you to re-enter the password. If you enter an incorrect password three times in succession, you see the message The projector’s operation will be locked and the projector switches to standby mode. Disconnect the projector’s power cord from the electrical outlet, reconnect it, and turn the projector back on. When you see the Password screen again, you can try to enter the correct password.
Capturing the Image Start by displaying the image you want to use from either a computer or video source, such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector: note 1. Press the Menu button on the remote control, highlight the Extended menu, and press Enter. When you choose an image for the user’s logo, it erases any previously used image. You can save an image up to 300 × 400 pixels in size.
Choosing When to Display the Image After your image is saved, you can set it to display as the startup screen, the screen you see when there’s no signal, or the screen you see when you press the A/V Mute button (see page 39). 1. Press the Menu button, highlight the Extended menu, and press Enter. 2. Select Display and press Enter. 3. Choose from these display options: note You can lock these settings to prevent them from being changed without a password (see page 54).
Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable quick startup, turn sleep mode on or off, and customize other projector operations. ■ Display Use this setting to turn off the display of messages, change the background color, enable logo display, or turn off the startup screen display. ■ Closed Caption Enables or disables closed captions. Select CC1, CC2, or OFF.
■ note projector when you connect the power cord (without pressing the Ppower button). Enable Sleep Mode if you want the projector to turn off automatically if it is idle (and no signal is received) for 10 minutes (you can adjust the amount of time using the Sleep Mode Timer setting). Enable High Altitude Mode when you are using the projector above 4,900 feet (1,500 meters).
Multi-screen Color Adjustment You can match the color of projected images when two or more projectors are being used to display images near each other. For each screen, you can set five levels of brightness and color correction. 1. Before starting, you may want to assign a numeric ID to each projector. This lets you use the remote control to select the projector you want to adjust. See page 43 for instructions.
Projector Menu and Options List The table below summarizes the options you can select based on the projector menu you are viewing. Some options may not be available depending on the input source you are using. For more information on these menus and options, read this chapter. 62 Menu Options Image Color Mode Brightness Contrast Color Saturation Tint Sharpness Abs. Color Temp. Color Adjustment Reset Signal Auto Setup Resolution Tracking Sync.
Menu Options Extended Display Closed Caption User’s Logo Projection Operation Standby Mode Projector ID Multi-screen Language Reset Network Wired LAN PJLink Password Web Control Password SNMP Mail AMX Device Discovery Projector Name Reset Info Lamp Hours Source Input Signal Resolution Video Signal Refresh Rate Sync Info Status Reset Reset All Reset Lamp Hours Fine-Tuning the Projector 63
Fine-Tuning the Projector
5 Managing Projectors T he software included with your projector lets you monitor and control your projectors from a remote computer. First connect and configure each projector you want to monitor. You can connect the projector over a wired network as described in this chapter.
3. Press the Menu button on the remote control, select the Network menu, then press Enter. You see the following screen: note If you’re a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you’re monitoring. 4. Choose Wired LAN and press Enter. 5. Do one of the following: ■ If your network assigns addresses automatically, turn on the DHCP setting.
Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. 1. Press the Menu button on the remote control, select the Network menu, then press Enter. You see the following screen: note You can also set e-mail alerts from EMP Monitor (see the EMP Monitor Operation Guide for more information). 2. Choose Mail, then press Enter. 3. Highlight On to receive e-mail notifications, then press Enter. 4.
note If a critical problem develops with a projector which causes it to suddenly stop working, it may not be possible for the projector to send a message. If Standby Mode is set to Network On in the Extended menu, the projector can still be monitored even if the projector is in standby mode (when the power is off). 68 Managing Projectors 7. Select problems or warnings to be notified about by e-mail. (Numbers 1 through 3 in this section correspond to the e-mail addresses you entered.) 8.
6 Maintaining the Projector Y our projector needs little maintenance. All you have to do is keep the lens clean. You may also need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Lens caution Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged. Clean the lens whenever you notice dirt or dust on the surface. To remove dirt or smears on the lens, use a commercially available cloth for cleaning glasses. Cleaning the Projector Case caution Do not use wax, alcohol, benzene, paint thinner, or other chemical detergents. These can damage the case. Before you clean the case, turn off the projector and unplug the power cord.
3. Place your finger into the groove and remove the air filter as shown. 4. With the front of the air filter facing down, tap it four or five times to shake off the dust. Turn it over and tap the other side in the same way to shake off the dust. 5. To clean any dust remaining on the air filter, use a small vacuum cleaner designed for computers and other office equipment to clean the front. If you don’t have one, gently clean the vent with a soft brush (such as an artist’s paintbrush).
6. Insert the air filter back into the holes in the cover, then press it firmly into place. 7. Slide the air filter cover in until you feel resistance. 8. If the dirt is difficult to remove or the filter is broken, replace the filter as described on page 73. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to obtain a new filter.
Replacing the Air Filter Follow these steps to replace the air filter: 1. Grip the air filter cover tab and remove the air filter cover as shown. 2. Place your finger into the groove and remove the air filter as shown.
3. Insert the new air filter into the holes in the cover, then press it firmly into place. 4. Slide the air filter cover in until you feel resistance. Replacing the Lamp note Turn off this product when not in use to prolong the life of the projector. The life span of the projection lamp is about 2000 hours if Brightness Control in the Settings menu is set to High (default), and 3000 hours if Brightness Control is set to Low. See page 78 to check the lamp usage.
You may also need to replace the lamp if the red. See page 83. Lamp light flashes warning Lamp light Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. If the projector has been installed on the ceiling, you should stand to the side of the lamp cover, not underneath it. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L47.
4. Loosen the two screws holding the lamp in place (you can’t remove them). Loosen, but don’t remove these screws note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.) 7. Once the lamp is fully inserted, tighten its screws.
8. Replace the lamp cover, then tighten its screws. 9. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight Reset, then press Enter. You see this screen: 3.
Checking Lamp Usage To check the number of hours the lamp has been used, press the Menu button and highlight the Info menu. You see a screen like this: note The information displayed depends on the input signal currently selected. caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately.
3. Install two AA alkaline batteries, inserting the + and – ends as shown. 4. Position the cover as shown, then press down until it snaps into place. Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: note ■ When shipping the projector for repairs, use the original packaging material if possible, including the protective lens pads.
Maintaining the Projector
7 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the ? Help button on the back of the projector or on the remote control. 1. Press the ? Help button on the remote control or on the projector. You see the Help menu: 2. Use the pointer button on the remote control or the navigational buttons on the projector to highlight menu items. 3. Press the Enter button on the remote control or on the projector to select the menu item. 4.
Checking Projector Status If your projector isn’t working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status.
Status lights (continued) Light Status Description Flashing orange It’s time to replace the lamp. See page 74 for instructions. If you continue to use the lamp after the replacement warning, there is an increased possibility that the lamp may break. Flashing orange Rapid cooling is in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises higher.
Solving Projector Operation Problems The power doesn’t turn on. ■ If the projector doesn’t turn on when you press the Ppower button, make sure the power cord is connected to the projector and plugged into a working electrical outlet. ■ The power cord may be defective. Disconnect the cord from the outlet and contact Epson as described on page 93. ■ If the Direct Power On function is enabled and you immediately plug the power cord back in after unplugging it, the power may not turn back on.
■ The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer. ■ If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button. ■ If you are projecting from a video source, make sure the Video Signal setting is correct (see page 50). ■ You can also try resetting all of the configuration menu settings. See page 47.
■ Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. See your computer’s documentation or online help for details. If you’re using Mac OS X: 1. Open System Preferences. 2. Click Displays. 3. Click Detect Displays. 4. Make sure the VGA Display or Color LCD dialog box is selected. 5. Click the Arrangement or Arrange tab. 6. Make sure the Mirror Displays checkbox is selected.
■ You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. ■ If you’re projecting a wide panel computer image, adjust the Resolution setting (see page 50). ■ If you’re projecting an image from a computer with dual display activated, turn dual display off. The image isn’t square, but keystone-shaped. If the image isn’t square or rectangular, adjust its shape as described on page 33.
■ If the projector is angled sharply toward the screen, it may not be possible to focus the entire image. Move the projector to position it more directly in front of the screen. ■ Lower the projection angle to reduce the amount of keystone correction required. ■ Make sure the projector is within the proper range (projection distance) from the screen (see page 99). ■ Make sure the lens is not fogged by condensation.
3. Adjust the Sync setting to increase the image sharpness. The image is too light or dark, or colors are incorrect. note Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. ■ Use the Color Mode option in the projector’s Image menu to adjust the color (see page 48). ■ If you’re displaying video, adjust the Color Adjustment and Color Mode settings on the Image menu.
■ If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted. In Windows, you may be able to check this by clicking the volume control in your Windows system tray (lower right corner of the screen). On a Mac®, you may be able to adjust the volume from your menu bar (top right corner of the screen) or via the volume control function keys.
Solving Problems With the Remote Control The projector doesn’t respond to remote control commands. 92 Solving Problems ■ Point the remote control towards the receiver. ■ Make sure the projector and remote control IDs match. To operate all projectors by remote control regardless of ID settings, set the ID switch on the side of the remote control to Off. ■ The remote control’s batteries may not be installed correctly or may be low on power. To change the batteries, see page 78.
Where To Get Help Epson provides these technical support services: Internet Support Visit Epson’s support website for solutions to common problems with the PowerLite G5000. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card.
Before you call for support, please have the following information ready: ■ Product name (PowerLite G5000) ■ Product serial number (located on the projector) ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer or video configuration ■ Description of the problem Purchase Supplies and Accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.
A Projector Installation T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room.
If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to tilt the projector down to position the image on the screen. This causes the image to lose its square shape. You can correct the image using the projector’s Quick Corner and/or Keystone functions, as described on page 33. Security Features The projector includes security features to prevent its theft when installed or used in public locations: ■ Security cable attachment.
■ Lens theft deterrent screw. You can lock the lens with the supplied screw, so that the lens cannot be removed. In addition, the projector includes several menu-operated security features (see page 54). Installing and Removing the Lens See the following sections for instructions on removing and installing the lens. Removing the Lens note You do not need to remove the lens when you transport the projector. For transportation instructions, see page 79. 1.
Installing the Lens caution Only install or remove the lens when necessary. If dust enters the projector, projection quality may deteriorate and/or the projector may malfunction. Do not install or remove the lens when the projector’s lens insertion section is facing up. Dust could enter the projector. Do not touch the lens with your hand or fingers. If fingerprints or oils are left on the surface of the lens, projection quality will deteriorate. 1. Turn off the projector and unplug the power cord. 2.
B Technical Specifications General Type of display Epson poly-silicon TFT active matrix Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 16.8 million colors Brightness High mode: White light output 4000 lumens (ISO 21118 standard) Color light output 4000 lumens Low mode: White light output 3200 lumens (ISO 21118 standard) Color light output 3200 lumens Contrast ratio 1000:1 Image size 30 to 300 inches (76.2 to 762 centimeters) Projection distance 2.7 to 47.8 feet (0.
Projection Lamp note Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Turn off this product when not in use to prolong the life of the projector. Type UHE (Ultra High Efficiency) Power consumption 210 W Lamp life Approx. 2000 hours (High Brightness mode) Approx. 3000 hours (Low Brightness mode) Part number V13H010L47 Remote Control Range 49.2 feet (15 meters) Batteries (2) Alkaline AA Dimensions Height 5.
Environmental Temperature Humidity (non-condensing) Operating altitude Operating: 32 to 104 °F (0 to 40 °C) 32 to 95 °F (0 to 35 °C) (over 1,500 m/4,921 ft, with High Altitude Mode and High Brightness mode active) Storage: 14 to 140 °F (–10 to 60 °C) Operating: 20 to 80% RH 0 to 9,843 feet (0 to 3,000 meters) (over 4,921 feet/1,500 meters, with High Altitude Mode active) Safety and Approvals United States FCC 47CFR Part 15B Class B (DoC) UL60950-1 First Edition (cTUVus Mark) Canada ICES-003 Class B CS
Compatible video formats 102 Technical Specifications Mode Refresh Rate (Hz) Resolution VGA EGA* 70 640 × 350 VGA—60 VESA—72* VESA—75* VESA—85* 60 72 75 85 640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56* SVGA—60 SVGA—72* SVGA—75* SVGA—85* 56 60 72 75 85 800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 XGA—60* XGA—70* XGA—75* XGA—85* 60 70 75 85 1024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70* SXGA1—75* SXGA1—85* 70 75 85 1152 × 864 1152 × 864 1152 × 864 WXGA—60 WXGA—75* WXGA—85*
Compatible video formats (continued) Mode Refresh Rate (Hz) Resolution iMAC VGA** iMAC SVGA** iMAC XGA** MAC13* MAC16* MAC19* MAC19-60* MAC21* 117 95 75 67 75 75 59 75 640 × 480 800 × 600 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM 60 60 50 50 60 60 50 — — — — — — — TV525i (480i) TV625i (576i) SDTV525p (480p) SDTV625p (576p) HDTV750p (720p) HDTV750p (720p) HDTV1125i (1080i) HDTV1125i (1080i) HDTV1125p (1080p) HDTV1125p (1080p) 60 50 6
Technical Specifications
C Notices T his appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage your eyes. ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not operate the projector on its side, or while tilted to one side.
Notices ■ Never push objects of any kind through the cabinet slots. ■ Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. ■ Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector.
■ Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■ Do not overload wall outlets, extension cords, or power strips. Do not insert the plug into a dusty outlet. This can cause fire or electric shock.
WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.) FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.
Notices
Index A A/V Mute button, 39 display settings, 58 Accessories, 10 Air filter cleaning, 70 to 72 ordering, 10 replacing, 73 to 74 Altitude, 60, 84, 101 Anti-theft device, 10, 14, 96 to 97 Aspect ratio, 99 Audio connecting equipment, 21 to 22 controlling volume, 40, 53 problems, troubleshooting, 90 to 91 turning off (using A/V Mute), 39 Auto Setup setting, 50 B Background screen settings, 58 Bands, vertical, 89 Blackboard color mode, 35 Blank screen, 28 to 30 Blurry image, 88 to 89 Brightness, 99 Brightness c
E I Electrical specifications, 100 E-mail alerts, 67 to 68 EMP Monitor, problems, 91 Environmental specifications, 101 Epson accessories, 10 PrivateLine Support, 8 technical support, 8, 93 to 94 warranty, 9 Ethernet connection, 65 to 66 Extended menu, 59 to 60 E-Zoom button, 40 Image adjusting, 30 to 36, 48 to 50 blurry, 88 to 89 capturing and saving in projector, 57 correcting shape, 33 to 34, 52, 88 fitting on screen, 50, 87 to 88 height, adjusting, 31 to 32 problems with, 85 to 90 projecting on chalkb
Lights, status, 83 to 84 Logo, saving on projector, 56 to 58 M Mac, display problems, 87 Manuals, 8 Menus changing settings, 46 to 47 default settings, restoring, 47 Extended, 59 to 60 Image, 48 to 49 Info, 78 network, 66, 67 Settings, 52 to 53 Signal, 50 to 52 User’s Logo, 57 Monitoring projector, e-mail notifications, 67 to 68 Mouse compatibility, 99 using remote control as, 42 Multiple projectors, controlling, 43 to 44 Multi-screen color adjustment, 61 N Network cable, 23 managing projector remotely, 6
Projector cleaning, 70 disabling buttons, 58 distance from screen, 13, 99 installing, 95 to 96 lamp specifications, 100 Menu and Options List, 62 to 63 monitoring remotely, 65 to 68 options, 10 password protection, 54 to 56 positioning, 13 to 14, 95 to 96 resolution, 99 security features, 54 to 58, 96 to 97 specifications, 99 to 101 transporting, 79 troubleshooting, 81 to 94 turning off, 26 turning on, 24 to 25 unpacking, 12 viewing information about, 78 Projector ID checking, 44 setting, 43 Q Quick Corner
Signal menu, 50 to 52 Six-axis color adjustment, 49 to 50 Sleep mode, 24, 60 Sound, troubleshooting, 90 to 91 Source, selecting, 28, 38 Speakers, connecting, 21 to 22 Specifications brightness, 99 dimensions, 100 electrical, 100 environmental, 101 general, 99 lamp, 100 remote control, 100 resolution, 99 safety, 101 Sports color mode, 35 sRGB color mode, 35 Startup screen creating, 56 to 58 settings, 58 user’s logo, see User’s Logo Status lights, 83 to 84 Support, see Technical support S-video cable, 10, 18
