User`s guide

12 Setting Up the Projector
Unpacking the Projector
After unpacking the projector, make sure you have all these parts:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the projector handle. See page 79 for transportation
instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive a composite video signal from a VCR or other video
device, you’ll need a video cable. One may be provided with your
video equipment.
■ To receive an S-video signal, you’ll need an S-video cable. One
may be included with your video equipment, or you can purchase
one from Epson. See “Optional Accessories” on page 10.
Projector and lens cap
Remote control and
2 AA batteries
PDF manuals and
registration CD-ROM
Power cord
VGA computer cable
Projector software
CD-ROM
Password Protected
sticker
Lens theft
deterrent screw