User`s guide

14 Setting Up the Projector
Ideally, you should place the projector directly in front of the center of
the screen, facing it toward the screen squarely. The base of the lens
should be about level with the bottom of the screen.
If you place the projector below screen level, you can use the vertical
lens shift dial to raise the lens (see page 32). You can also tilt the
projector up by extending the front adjustable foot. Tilting the
projector causes the image to become “keystone” shaped, but you can
correct the distortion (see page 33).
For instructions on installing the projector in a permanent location,
such as a theater or conference room, see page 95.
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
®
anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
page 10.
Screen
Projector